Mousike Cabinet Pull Metal Template， Handle Drill Mounting Template for Cabinet Doors and Drawers(Silver,1Pack)

This product hits a good middle groud btw the smaller, plastic cabinet handle templates and the large adjustable ones for pros. It worked well enough, but a few small tweaks would really improve the usage. To start, the edges on mine were razor sharp. Sharp enough that basic handling or sliding your finger across the surface was able to give small "paper cut" scratches. I wrapped painters tape around the whole thing once I had my dimensions set. Secondly, if the preset depth holes are not to your liking, there is a slot you can set the stopper edge into to get the exact distance you are looking for. That's the good part. The problem is that it is only marked on the top side, but the screw-down nuts are large enough that they block view of its precise alignment. Adding the same markings on the underside of the template would solve this issue completely. And finally, the supplied drill bit, while a nice inclusion, was the dullest new bit I've ever encountered. It had the sharp center-point tip, supossedly to keep it from "walking" as you start drilling, but it was not sharp at all and was actually rounded over, so that the bit did the exact opposite and wanted to slip around before the hole got started. On top of that, the bit itself was so dull, I had to press VERY hard to make each hole. It's like using a dull kitchen knife. More chance for problems and mistakes when you've got to press so hard. I grabbed another used bit from my garage and it went right through with ease, just like you'd expect.Even after the compliants, I'd buy it again, knowing that the price was fair and using it is far better and faster than manually measuring each cabinet handle location. Just have your own fresh drill bit handy in case the supplied ones are all super dull.

This worked so well for our cabinet knobs and drawer pulls. The pulls got tricky with the different size drawers but we were able to adjust this device and make it work. We followed others reviews and used tape on front and back to prevent scratching and cutting.

Does the job.

Great tool... made installing cabinet pulls a breeze!!

This was a step up for me. I used one of those little plastic corners to make marks for knobs in the past, but I needed something bigger to mark some longer pulls. This works great!

It was a bit tricky to get the hang of it because there are no instructions included. Once I figured it out it was easy to use. I will say it has different holes for different size handle spacing. I was rolling right along until I almost drilled the wrong hole, almost. Find your holes first and cover the rest with a piece of painter's tape so you don't drill the wrong hole. Just leave the 2 that you need open and the rest coved. I did clamp it in place and drilled them while it was still mounted instead of marking the hole and removing the jig and then drilling. The provided drill bit is of very good quality as well still going strong and has a point so it doesn't slip. One last thing, as this is metal and not plastic it may scratch a bit so you may want to add some painter's tape to the backside as well.

Needing another set of stop and wing nut for the long readout. Would make it complete for doing doors. But this tool works very well as is.

Didn’t lije

Bigger then expected. Heavy duty.

Managed to get the job done with some effort. Accurate adjust is difficult because the stop plate is on the back and dimensions are printed on the front. The knobs are not easy to align accurately by eye. Locating at correct height is not easy and needs to be clamped in place to avoid it shifting. I Accidentally drilled the wrong hole on one of my doors. I'll admit it was my mistake but it was an easy one to make especially if trying to work quickly.

Did not come with all the pieces. I had to return it.

I was hoping to use the product but it has a defect.Holes are to tight for the screws it came with.I’m going to have to return it unfortunately.