ELECTROCOOKIE PCB Prototype Board Snap-on Strip Board with Power Bars for Arduino and DIY Electronics, Gold Plated, 3.8 x 3.5 (2 Pack, Matte Black)

I use these for hobby projects and have become a favorite of mine. The gold plating really helps.

They do look like quality boards. Hope they are as good as they look.One issue I have had with other boards is copper pealing off when you have to re-solder a component or replace it. Hope these are made of hardier stuff. They certainly look it.

Just what my husband needed for his project

This universal PCB is very well made and the solder keep to the track very well, I would say that it bonds too well - if you makes any mistake the removal of the excess solder may be difficult, but it also means that the components will keep firmly if they are properly soldered. The breaking it to the separate pieces may feel unsure if you will try to brake the PCB using your own hands, but it was never happened to me that the break line was not as expected, eg not a straight line or uneven edges like it is often happens with the cheap PCBs

Arrived quickly, good value for money

Holes were the right size for my pins and soldering was easy 17/17 stripboard.

nicely made. The pads go all the way through, not stuck on, and the boards are modular in the sense that you can leave them attached together for a larger project or split them up for smaller ones. You can even span two boards with an IC because the holes line up where the boards join - there's no gap. They also look nice.

scheda per prototipo arrivata rapidamente, articolo come da descrizione

部品配置そしてはんだ付けのしやすさが実感できました。また、はんだ付け修正を行っても導体部分のは剥離が起きませんでした。サンハヤトの基板も使用していましたが、このパターンはありませんでした。私の場合、CADを使用して外部発注し、基板を製作してもらうレベルまでの電子工作ではありません。ごくごく試作程度です。部品をこの基板に載せても、その部品との導通部分にジャンパー線を入れる穴がとれます。これが助かります。＊（注意）　基板を固定するための基板の四隅（中央も）の使用ネジについて。M2 です。M3は入りませんでした。　私の場合、M2-10 を使用しました。

These are very well made. Pads go through the board instead of just being plated on the surface. The boards are thick and just feel high quality. The layout is intuitive. Definitely worth the extra buck or so.

フライトシミュレータの自作IO用に使用．　ほとんど初心者なので失敗を繰り返しているがやり直し（ハンダ付けし直し）しても耐えてくれる．　JST　XHコネクタを裏表それぞれに取り付けて装置のブロック分けに使用．　4分割の1枚で使用する事が多い．　3セットリピート買い済．　姉妹品のMini6Pも同時購入したが、当方の使用目的には小さく待機中．