Universal Phone Tripod Mount Adapter with Ｗireless Camera Remote , Cell Phone Holder with Adjustable Clamp for Selfie Stick Monopod Compatible with iPhone, Samsung and so on , Wrist Strap Included

This adapter holds a typical smart phone (up to 4-1/8" wide; see photos). I already owned a stand with a standard camera mount (1/4-20 thread), and this was a perfect addition. It's not going to survive a drop to a hard surface, but hey this is for a camera/phone, you need to be careful anyway. I was pleasantly surprised with the quality, and especially the inclusion of the remote, for the very reasonable price I paid. Others mentioned the lack of instructions for the remote, but mine came with brief instructions (photo). In the photos I also show the adapter attached to my stand, both with and without the phone. This product was useful immediately! I recommend this as a budget item for a non-professional.

Wish I had this several years ago. It works great. Don't have to ask a stranger to take my phone and snap a picture because the bluetooth remote works so well. Much better than a selfie stick and easy to setup

Battery was preinstalled, nothing required for that. There's a tiny on-off switch on the upper/right side, slide it 'up' to turn on, a blue light on the left flashes a couple of times. Pair your Android phone (no idea about Apple details ...) while the switch remains on, not pressing any of the two trigger buttons. Shows as "AB Shutter3" in the BT list after pairing on my S23. Press the Android push button with camera open and it takes a picture. Simple. Turn it off to avoid running down the battery (so easy to forget, this will probably be a battery killer ...) Turn it on later in the presence of the phone and it seems to connect before I can get the picture setup, so painless. Again, remember to always turn it off. The button seems fragile (and likely quite vulnerable to water/dust ingress), but it was also cheap. Biggest problem would be if it dies, it's harder to use the mount to actually take pictures. Mount seems fine / reasonably sturdy / simple. Not very svelt or cool looking, but hey, it's a camera mount and it holds my phone, even in my oversized case. Win.

I Like It, This Is How To Fix It's One Flaw.... It's a nice combo, the smart phone clamp for standard tripod mounting and the BT remote are great together. The joint where the clamp is fixed to the tripod adapter is a little thin. There is a circular well on the tripod adapter that retains a rubber washer and a knurled knob is used to tighten it's 1/4-20 stud into the mating surface on the clamp. This allows the phone to be positioned at any angle. The backside of the well is thin and the contact it has with the 1/4-20 stud is small so tightening it beyond a point can force the stud through the well. All you need is to obtain a 1/4" fender washer (I like Stainless Steel) that is 1" to 1.25" across and put that between the backside of the well and the 1/4" stud. By doing this you spread the force across that whole 1" area! You will not break the plastic without first squeezing the entire rubber washer out of the well! More likely, you would pull the brass threaded fastener out of the clamp part instead. It doesn't need to be nearly as tight as that to hold your phone very securely. On selecting a washer, try to find one with a hole very close to the size of the 1/4" stud. For ANSI washer sizes, there is a Narrow at .281" and a Wide at .312"; you'll want the Narrow one. The wide one will work, but may get slightly off-center. I used a 3/16" washer myself that is .250", but you have to use a needle file to make the hole a little larger. You could also roll up some better quality 220 sandpaper and open up the hole with that. It's worth the effort. I wouldn't recommend trying to use a drill for this though, it could result in stitches or loss of eyesight.

This works real well if you want to watch something on your phone holder.

This is great if you take alot of group photos. The clicker works great and I have purchased them for all of our kids. Can’t beat the price!

holds my phone, what more can I say

The mount is fine, plastic but sturdy enough. The issue I have is that the phone holder is screwed in. When I'm trying to take night pictures, and the mount is horizontal, it's really hard and a hassle to screw the phone in the holder, then I want to adjust it, have to unscrew the mount, rescrew it back in. I ended up getting another that has a spring to hold the phone in the mount. I'm keeping this as a backup, but I wish I'd just gotten the other spring one to start with. Also, zero instructions for setting up the wireless camera remote.