EWK Motorcycle Adjustable 39-50mm Fork Seal Driver Tool

I know many of you have use the old PVC pipe method when rebuilding your motorcycle's forks to drive in the fork seals.Well I tried that and it was too risky to take a chance of damage seals. The tool came without any instructions, but at this level. Do you really need instructions?I even tried the grinding down a small brass punch and push the seal down into the recessed space of the fork. Read a lot of reviews for this tools and I was a bit skeptical myself. Well I took a chance and got the tool.After trying the old method for an hour I gave up and took a chance and order this tool. Well it came and it literally took me about 10 minutes to properly seat the seal down into the upper fork legs.The trick is to slowly slide the split hammer collar down while turning the 3 plastic finger around the seals. Once the seal goes down into the groove evenly. That's when you use a bit of more force to slide the heavy collar down. As you slide the collar down with some medium force, you rotate the 3 fingers so that you can evenly drive the self in evenly. It took about 15 slide and the seal finally was seated and I put in the snap ring in and voila. Took me about a total of 30 minutes for both legs taking my time with even pressure.The tool actually works and the seal isn't damage or nicked anywhere. There's no signs or marks on the seal itself. Great tool and definitely worth the money spent. The collar has a nice weight to it and has two pins to lock itself in place while there's a plastic sleeve to protect the fork sliders.No issues and the tools feels sturdy and should last many years for those DIY mechanic who likes to work on their bikes.

Does the job,just be careful and take your time. If I had it to do over I would have gotten a different tool THAT i found later. No instructions , watch the video by the product will help some.

Good product , Don't be too harsh on it unless you're sure it's in place. It works just fine.

I had to do fork seals on a 2004 Hayabusa. This worked great to drive in my new seals. Perfect for occasional use. I would recommend

This does not work for a 48mm KTM/Husqvarna fork. It is not big enough to wrap around the fork and the ends that should press the seal in do NOT fit.

So unlike another seal driver I bought this one has som sort of protection on the slide hammer that will protect your fork from scratches. Only thing that became annoying was having to hold the two halves together which was fixed with electrical tape worked like a charm much easier than the diy methods for my 20 year old forks.

Too small for 49mm forks, the two peices dont connect properly, would work fine for a smaller fork.

Works well! Used on my KYB 46mm forks. Use a zip tie to keep the slide hammer together and let er eat. I tried to adjust the points of contact with the little screws but they were stripped from the factory lol. Loose as a goose but they still clamped onto the fork good enough.