Cooler Master SickleFlow 120 V2 ARGB 3in1 Square Frame Fan, ARGB 3-Pin Customizable LEDS, Air Balance Curve Blade, Sealed Bearing, 120mm PWM Control for Computer Case & Liquid Radiator

Worked really good brought my temps down about 7 degrees. Not that loud either at its highest speed which is 1800rpm

GENERAL INFORMATION I purchased these fans to replace some broken ones that came with my case. Fortunately, I much prefer these for multiple reasons. PROS - Decently quiet. Certainly no where near silent, however, they’re a great option if you’re not looking for silent but don’t want it too loud. - Insanely easy to install. Good documentation in the manual and instruction guide. The included base was - interesting to set up, but I did get there. - Good quality. The fans seem really unlikely to break. Ever after quality testing one of them, I was able to break 2 Corsair fans before I could break one of these things. They’re made really well. - Looks great in an ARGB build! CONS - Not going to look good in an RGB build. While you can buy a splitter and convert the ARGB to RGB, a big part of the color will get lost and you’ll see a “mild, weirder” color out of the fans. However, as these are ARGB dedicated fans, they do ARGB well. CONCLUSION There’s not much reason not to buy these fans. If you need a good budget pair of fans, this does the job - and really well, at that!

I bought the 3in1 ARGB kit with mini controller. Did not come with a manual or installation instructions. It is also not available on their website or any others that I could find. After emailing support, they sent me a photo of a hard copy which I will post here for you all. Installation was not difficult, however, it is so much wiring, it was a PAIN to make it look clean, but I eventually got it done. Make sure you have a 5pin power supply to 15pin SATA cable(female) to connect the mini controller or else RGB will not work. Overall, good quality, low noise level, bright LEDs, and decent customer support.

Good fans, plenty of airflow and fairly quiet. LEDs are bright and true. You can daisy chain the fans but the included controller only has 3 or 4 color modes. No teal, orange, etc. You will need a motherboard with addressable RGB or a ARGB controller. Kinda disappointed in that as I prefer buttons over software.

..why not have a couple spares? I just needed one more for my new build. Cooler Master makes great stuff and these are quiet (and pretty!). Here's my build, rock stable and fast as hell! Logitech G502 HERO High Performance Wired Gaming Mouse Logitech G910 Orion Spectrum RGB Wired Mechanical Gaming Keyboard External DVD Drive, USB 3.0 Portable CD/DVD +/-RW Drive/DVD Player Cooler Master SickleFlow 120 V2 ARGB 3in1 Square Frame Fan Cooler Master MasterFan SF360R ARGB 360mm All-In-One Square Frame Fan w/ 24 Independently-Controlled ARGB LEDS ASUS ROG Strix Z690-E Gaming WiFi 6E LGA 1700(Intel 12th Gen)ATX gaming motherboard Cooler Master Hyper 212 Black Edition CPU Air Coolor Cylewet 10Pcs Mainboard Computer PC Internal Speaker Buzzer Computer Case Buzzer Intel Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unlocked SAMSUNG 870 EVO SATA III SSD 1TB 2.5” Internal Solid State Hard Drive Cooler Master MasterBox TD500 Mesh Airflow ATX Mid-Tower with Polygonal Mesh Front Panel, Crystalline Tempered Glass Corsair Vengeance DDR5 64GB (2x32GB) 5200MHz C40 Intel Optimized Desktop Memory Corsair RMX Series (2021), RM1000x, 1000 Watt, Gold, Fully Modular Power Supply,Black SAMSUNG 980 SSD 1TB PCle 3.0x4, NVMe M.2 2280, Internal Solid State Drive

Good solid performing fans with good static air flow for my Cooler master TD-500 mesh PC case. I replaced the stock 3 intake fans on my CM TD-500 mesh with these fans due to the included case fans were kind of weak on the air flow pressure and had an annoying bearing ticking noise to them as well. So far so good no problems with these Cooler master SickleFlow 120mm V2 ARGB case fans including the one I installed last year in June 2020. One thing I forgot to mention is that these fans are not completely silent but they are not that noisy either just FYI.

I put 4 of these in my Cooler Master NR200P mini-ITX build, which is probably overkill but I wanted to cover the full top and bottom with ARGB. Super pleased with the result, the ARGB looks great through the tempered glass. They can be fairly noisy when the RPMs fully ramp up but with that many fans the airflow is good enough that they rarely get up above 30% speed and are almost silent. Overall great fans for the price and I’m perfectly happy with them.

These fans were around $25 for three of them. The average price I found for case fans was around $20 for one. These are an absolute steal and have better specs than almost all the other reasonably priced case fans. They work amazing, keep really quiet, and have higher rpm than the fans that came with my case. They come with an extension cord if the fan's wires don't reach a useable port, however I was not able to use this and the connecters don't really fit. This did not matter because the fan's wiring is long enough that you don't need the extension in order to be able to reach the connectors on the motherboard. As long as your motherboard has a lot of fan connecters and rainbow rgb connecters, this is by far the best product out there.