SONAX PROFILINE Headlight Ceramic Coating (10 x 5 ml) Long-term ceramic sealing for plastic headlamps | Art-Nr. 02765410

Excellent, makes the plastic lens of the headlights and rear lights look newer and feel slippier compared to the paint. Depending on the condition of the lens, it can be applied without any prior polishing, after a light polishing with something like SONAX PROFILINE Np 03-06 (paint polish), or a more substantial work in case of badly deteriorated plastic. I used a plastic glove to spread the content of the sachet in order to stretch it to treat two cars, all lights around. It might be enough for three cars actually. If spreading with a tissue, plenty of fluid will be wasted, so use a glove or clingfilm. The fluid is oily. It covers any imperfections on the surface and makes them by far less visible. In 5 minutes the fluid begins to thicken - this is when you wipe it off with two kitchen towels, have several at hand. All together it takes 10 minutes to treat two cars. It feels like the coating will need to be reapplied every 3 months.

Having tried multiple methods to clear my hazed headlights I finally opted for a restoration kit. After a few hours of sanding and buffing I applied this and almost 1 year later they still look great ! I recommend !

Thanks

OK, my lights were not that bad to begin with - just starting to fade in a few small areas - so I thought I would buy this product just to stop them getting any worse. I used a little bit of T-Cut in the few places on the lights just to smooth them off a little bit first (5 - 10 minutes rubbing max). I then used the tip stated in one of the other reviews to use a piece of clingfilm to apply the liquid. I folded up a large piece of cling film into a small 10cm x 10cm 'pad' to use as an application 'cloth'. This stops the liquid in the sachet from being soaked up by a conventional cotton cloth. I then quickly applied a very small amount of the liquid to the lights and smeared it round with the clingfilm. EASY. Then I immediately used a separate polishing cloth to wipe off the excess liquid. I easily did the front and rear lights on my Mazda CX5 and had enough left to do the front lights on the Mrs' Renault. I left the lights for 4 hours as instructed and then checked out the handy work. I have to say that the lights look brand new - though of course they weren't that bad to begin with. If they are now protected for 12 months from further UV deterioration then I am a happy bunny.

Recommended by a detailer friend, I had my headlights polished to remove the milky discolouring and needed some form of headlight sealant with a decent amount of UV protection. Ordered the Sonax Profiline Headlight Coating from Amazon and gave it a try. There are 10 sachets in the box with each sachet covering a set of headlights. Application was easy, the instructions say to wipe after applying, then allowing the headlights 4 hours of sitting and curing and to refrain from washing the car for a week. I've followed the instructions to the letter and the results have been fabulous. Durability is up to 1 year in ideal conditions but it doesn't matter, I have 9 more sachets waiting to be used :)

This stuff works very pleased

I've polished my headlights multiple times and they always start to fade again within a few weeks. Thought I would try this ceramic coating out, not expecting too much. However over nearly 2 months later and the lights are as clear as when I polished and coated them. I would say this is the best option for keeping lights shiny short of getting them properly sanded and resprayed with clear laquer. And a lot easier / cheaper. And plenty in the pack to redo in the future if needed.

Not brilliant needs hard work wouldn’t buy again

Gutes Material, leichte Verarbeitung guter Schutz

Ce Sonax fonctionne vraiment, il donne une seconde vie aux phares. J'ai fait un Polissage à la perceuse (5 minutes) le résultat est excellent. Je le recommande.

In mancanza di un carrozziere fa davvero tanto. Poi in caso il fanale sia davvero rovinato sarà da cambiare o da andare da un professionista ma con me ha fatto la differenza.

Es sah nicht gut aus. Ein Scheinwerfer ist 15 Jahre alt und der andere wurde vor ein paar Jahren nach einem Wildschaden getauscht. Rechts schön klar und links ziemlich vergilbt. Mit SONAX und Schwamm gründlich poliert und schon sieht es wieder gut aus. Tiefere Kratzer können so natürlich nicht entfernt werden, dafür ist das Mittel nicht abrasiv genug. Aber angegilbte Scheinwerfer werden zuverlässig gereinigt und werden wieder klar. Ich kann jetzt keinen Unterschied mehr erkennen aber mehr wollte ich auch nicht.

Lo primero que hay que hacer antes de aplicar el producto es eliminar todo el "óxido" del faro. Después abrir el sobre por una esquina y verter unas gotas de producto sobre, por ejemplo, una gamuza (como una toallita de las gafas) y aplicar esta sobre el faro, una vez que esté pulido, limpio y seco. Tras unos instantes nivelar para que no quede más producto en unos puntos que otros. Sobra producto en un sobre para hacer dos faros sobradamente. De hecho se puede hacer un recubrimiento cerámico comoleto a un coche con 50ml. Si se emplea bien el sobre puedes dar al menos 2 pasadas a cada faro, dejando un tiempo de secado entre aplicaciones. De esta manera damos mayor protección al faro. Ya lo he aplicado a 3 coches con excelentes resultados