SybaMobile Desktop Tower Computer Metal Floor Stand Rolling Caster Wheels with Ventilation and Adjustable Width from 6 to 10 Inches - SY-ACC65057

i picked this model because it came with foam pads to protect the PC case.overall the build quality is very nice. thick sturdy metal, locking casters, a small spanner is included, and they even provided an extra screw/washer/nut just in case you lose one. the casters roll fairly smoothly, would be nice if the wheels had some rubber, but it'll do :)there were no instructions included with the item, but it is fairly straightforward. for those that purchase, i'd recommend inserting the screw from the top of the side plate through the main plate, then placing the washer then nut from the under side. they include a small spanner to tighten the wheels, but not one to tighten the side panel nuts. be sure to have a screwdriver and adjustable spanner at hand when you go to put this together!overall very happy with the purchase, and would recommend this to others.one piece of feedback for the manufacturer, replace the side panel nuts with thumb adjustable versions as this would make adjusting the side panels to fit your PC much much easier!edit: after placing my PC on the cart, there is one minor drawback that i identified. the foam provided to fit the bottom of the cart is not thick enough to protect the base of the PC case from the screws that hold on the side panels. essentially the foam is at the same height as the side panels rest, which completely negates the benefit of the foam, since your PC is now resting directly on top of the screws. minor issue, since most people are unlikely to ever look at the bottom of their PCs, but thought it should be called out..

I bought this to keep my desktop off the carpet because it is way too large to keep it on the desk. I figured it would feel like cheap plastic, but surprisingly it feels rather sturdy. It is adjustable so different size computers will fit. Mine is large and heavy (weighing in at 20lbs empty), but it seems like it could accommodate an even larger computer. I read a lot of reviews where people struggled to move it across carpets and said it was unstable. However, I've had the opposite experience. I've managed to roll it gently and it did fine. With the wheel in the center and the rubber grips on each side, it feels decently stable. I wouldn't push it from the top of the tower though. Rather, I gripped it from the bottom near the wheels and moved it very carefully. The wheels even rolled well on my very plush/shag carpet. Also, I don't move it everyday, nor do i move it very far. This stand works exactly the way I want it to. It keeps my computer off the carpet and allows air circulation from the bottom. It also moves around fairly easily to allow for easier cleaning.

EDIT, 12/13/13, rerated to four stars. I've had more time to compare this thing to other caddies, now. FAR superior to the plastic ones. The unit now graces my huge HP 6400, and it rolls far more stably, than the plastic units I have. Were I to buy another caddy, it would be this one. The only reason it's not five stars, is that the unit is still too narrow, lengthwise. They need to make a 'longer' one for these big towers. Original review follows unedited, below.==========Years ago in some cheapo store like Pic N Save in the western US (or Dollar General), I found a metal video gaming caddy on casters. Whole thing is no more than 12" high and 8-10" wide including the casters, with handy barred sides. Plop some 1/2" thick wood on its bottom shelf, and you got yourself a dandy computer tower caddy. Like today's Cropper Hopper, but shorter; leave off the short cross-bars (where files are to suspend). But even the shorter CH is almost $40, and WAY too tall. My little gaming caddy was maybe $7, works great for my Dell 8400 monster, with plenty of room to spare. Those barred sides make it easy to pull around, when needed. Do you think I can find that thing now? Guess again! (Hint hint to any manufacturer reading this.)So, I needed another caddy for my HP 6400 workstation. So bought this IO Crest a few days ago; it arrived today. It has several shortcomings versus my other unit, but all can be easily fixed. Biggest shortcoming is the length: most of your tower hangs out. Fix that, by putting a 1/2" thick block of wood sized to your tower, on the bottom of the interior. So, now the computer sits ON the wood. That solves the next shortcoming, the bolts sticking up at the bottom interior, of the IO Crest. Thirdly, use cushy plastic lattice kitchen drawer liner rather than the provided adhesive cushioning; for you just know, the provided cushioning will soon shred. The liner eventually sticks to the bottom quite well, the equivalent of removable adhesive. So you line it U-shaped, for good grip at bottom AND sides. Instead of, hassling with adhesive placement.(No-extra-charge hint: I use this liner in various colors on the top of my towers, too, to cover the dull black machine tops; but even more importantly, to assure that my external drives and DVD players sitting atop the tower, don't slide. Cut liner to fit, washable and easy to replace; then when you bump into your tower, you don't lose your drives.)Here's an alternate way to assemble the unit so you don't have to deal with those bolts rubbing against the bottom of your tower: REVERSE THE SIDES. Meaning, when you assemble, instead of putting the sides on so that the bolts are INside the bottom, turn the sides around so the bolts are on the OUTside, like this: (ignore the dots; underline represents the curved bottom of the side. The paired brackets just above it, represents screw placement. The brackets at far right, illustrate the side itself rising upwards.)...........]...........]...........]....{}.....]______]So, you install the sides so that the screws are on the OUTside, not the inside. Just the reverse of the picture. This means that the sides will not be flush with the bottom. It also means that you better test your tower for width, before you assemble, for you've just narrowed your maximum width, by maybe 2 inches. Then again, you get a tighter fit. Made much better with that kitchen liner, rather than the provided adhesive cushion (which is only 1/16" thick, and will easily rot).Oh: assembly goes much faster if you first do the wheels, and if you do everything upside down. The washers go UNDER the bottom, rather than under the top of the screws. And tighten the nuts all the way with needle-nose pliers, even though you want the sides to slide; then, reverse-turn once or twice to enable sliding. Else you'll have a very unstable base for your computer.Oh 2: put the locking casters at the BACK, not the front. Diagram on box and picture, show the locking casters on the front. Don't lock them, either. They must have been thinking you'd move the thing from the back instead of from the front, but if it's under a desk, you have to move it front-first. That's a problem here, as the sides are too short, however study. Hence the advantage of that kitchen liner, so your 'puter won't slide as you move it forward.I'd give this IO Crest five stars if sides were 12" high and barred like the Cropper Hopper; oh, and if IO Crest made the base 2.5x longer, so the computer won't hang out. (The hanging out, renders the computer prone to tipping.) The higher sides would make it easier to move around by the handles. But as it stands, I can make it work.. until I again find the caddy mentioned at the beginning of this review.At that point, this little IO Crest is so hand-truck sturdy, it will become an alternate hauler. Neato.

I placed my PC on this stand to get it off the hardwood floor and prevent dust from getting in my case. The casters are nice, and two of them can be locked into position. When unlocked, wheels glide well across the hardwood floor. This thing is made of metal, and is pretty durable.

The castors are super convenient and the base is excellent quality with rubber nubs to hold your tower in place. Highly recommend for anyone who needs the extra desk space but doesn’t want to have their tower right on the floor or carpet. Small enough to not detract from tower aesthetic as well.

Material plástico pero se siente sólido y resistente. Tiene antiderrapante en las esquinas. Para el equipo que lo compré era para uno del trabajo y le quedó grande ya que no ajusta el largo de los brazos. Pero para un equipo de tamaño estándar ajustaría perfecto. Las llantas no tienen freno pero no es algo que necesites si estará en un lugar que no estobre. Pero si es así, estarás moviéndolo sin querer muy frecuentemente. Esto es especialmente molesto al conecar o desconectar cables al frente. Pero si quieres acceder a los de atrás sin levantarte sería una ventaja más que una desventaja. Para lo primero basta con usar dos manos.

Es de metal, luce resistente, fácil armado, lo compre como reemplazo a una base de plástico que luego de un tiempo no soporto el peso del gabinete, me parece una compra perfecta, buena relación calidad-precio. Ah se puede ajustar el ancho dependiendo del tamaño del gabinete.

Perfect fit. Nice quality. Awesum product.