Master Tailgaters Rear View Mirror Three Metal Bracket Adapters for Volkswagen, Audi, Dodge, Ford, Honda

This product is good quality, however the adapter that I used for my Ram Promaster did not fit and had to be filed down a bit.

If these came in bare metal, they would be perfect since the paint makes it harder to fit on. I purchased this to hang a new rear view camera display/mirror. I used a rubber mallet to wedge the bracket into the mount and then got it on the window mount. The fit is tight but it's working great. I think stripping or sanding some of the paint off the bracket would make it easier to assemble. Either way, I'm happy with the device and would recommend this product.

This fits well over the 2014 ProMaster connector however I had a difficult time getting it to fit on the wolf box mount. I can't blame this unit since I don't know if the wolf box wasn't quite to a standard or this wasn't. But it did go on to the ProMaster perfectly mounted exactly which was great.It has two other pieces in it that will fit other cars have no idea about them. I couldn't find any better way to adapt my ProMaster from the Fiat system because the ProMaster is actually a Fiat Ducati delivery van

Not compatible with what I wanted to use them for, so had to return item. Would encourage seller to have a better idea what these are compatible with so when people ask, they can give an accurate answer and not have to deal with getting their item returned.Material felt solid though, so had they fit what I needed them to, I would have expected it to last for a while.

Does not fit a tri lobe mirror fitting like found in Dodges. Will have to clearance severely. DO NOT BUY, FIND ANOTHER

Ordered for a 2015 Ram 1500 with 5 sided twist mount mirror. This adapter went on easily and tightened up perfectly. Attached new mirror. Worked as expected.

This item installation is not like the OEM rear view mirror wedge base that must be put 90 degrees and then twisted back to 0 degree. You just need to use the small hex key wrench to unscrew the bolt on the adapter, slide the adapter at normal 0 degree angle without any twist; then use the arm hex key that came with it to tighten the the screw to lock the adapter.The body of the item is made of iron and looks sturdy but the locking small walls which are designed to keep the adapter from moving side to side are weak.We all love adjusting the rear view mirror after it is installed and that should've been the normal way to afjust it. But this weak adapter side guards or walls will likely break while doing so.I checked online and I couldn't find a better adapter for rear view mirror wedge base(compatible with my 2003-2007 Honda Accord) and I don't know how long this current one will last. So I'll be keeping this item and before it breaks, I must drill a couple holes and add 2 more screws to hold it tight.I can't recommend this item but I'll give it 2 stars for having most of the adapter made of metal(if it lasts 12 months, I'll add 1 more star). If you find another one with a better design, go for it. If you cannot find a better design like me, just buy it and always remember that moving your rear mirror can break it easily.

I just bought a set of three mirror mount adapters from Master Tailgaters on Amazon. One of the three worked perfectly to enable me to mount a Gentex mirror with Homelink and auto dimming in my 2004 Porsche Carrera. The Master Tailgaters adapters were all well made, but the one I needed fit perfectly. installed on the car it isn't noticeable, giving the install a factory look. Now my Porsche 996 has capabilities I need (Homelink and auto-dimming, plus a compass) that it didn't come with from the factory, but it looks like a factory install.