15FT (180 inch) Stainless Steel Braided Ice Maker Hose with 1/4" Compression by 1/4" Compression Connection

I had a old copper tube for the refrigerator water supply that sprung a leak after 20 years. It was also kinked in a couple of places from when the plumber installed it many years ago. This hose is way better. It was super easy to run and won't kink. The only issue I had was that the fittings on this hose are somewhat larger than that on the old copper tube so I had to enlarge the hole in the floor where the tube ran into the basement to connect to the water supply line. That took a couple of minutes with something like a half-inch drill bit.Make sure you get a long enough hose. Measure the distance from the fridge to the supply pipe carefully and then add in a few feet to account for pulling the fridge away from the wall for installing the hose and later service. I would err on the side of something too long over one too short. You can always loop it up and hang on the back of the fridge or the wall if you have some extra length.

This product was a lifesaver. The prior owner of the home installed the dishwasher in the wrong place and traditional cords were too short to reach the hook ups. The cord works great and I recommend it.

Installed at my daughters new house so there would be water for the refrigerator. Always use a braided stainless steel hose, much better quality than a standard hose, and less likely to leak. Quarter inch compression fittings worked like a charm with no leaks.

It was easy to attach. I did find out it takes awhile for the water to go through the line and fridge. at first water out of dispenser was a trickle and I checked every inch of the line for crimps. Also, I realized you can crimp the line, so I used caution to run it to our refrigerator. Worked out great.

I AM USEING IT TO CONNECT ICE MACHINE IN REFRIGERATOR. I DID NOT GET TO IT YET BUT IT SEEMS VERY GOOD .ONE VERY GOOD THING IS YOU CAN ORDER THE LENGHT YOU NEED NOT SO WITH COPPER MOST OF THE ROLLS ARE 45 OR 60 FEET THAT MEANS A LOT OF WASTE OF COPPER . IF I WAS STILL WORKING AS A PLUMBER THERE WOULD BE VERY LITTLE WASTE.. THANK YOU ED FEELEY

Length and fit was perfect for my refrigerator ice machine

Haven’t had any issues so far. Wish I could find one in a 12 foot.

Quality was good, no leaks at fitting connections. Also the length was accurate. Good value.