EVEOCord Hider - 306” Cord Cover Wall Cable Hider, Cable Concealer, Wire Hiders for TV on Wall. Cable Management, Cord Hider Wall Cable Raceway Wire Covers for Cords -18X (L17 W0.95 H0.5) - White

I bought this cord concealer as a temporary fix to hide the cord from my bidet — the outlet is in the main part of the bathroom, while the bidet is tucked away in the toilet room like a VIP. I was tired of tripping over the cord in the middle of the night like I was on an obstacle course, and visually? It drove me nuts.This stuck to the wall perfectly and came with connectors and corner pieces that made the whole thing look super clean and seamless. I thought I’d be staring at this “temporary” fix every day... but nope. I completely forget the cord is even there now.It’s sturdy, simple, and honestly saved my sanity (and my toes). Until I get a proper outlet installed, this is doing the job perfectly.

You get a lot for the price! Too much, but it’s worth the price and then some. Easy to use, no drilling, no wire ties and I placed the tv power cable, the direct tv power cord, the dvd power cord as well as the hd cable for the tv and dvd player inside. I didn’t peel the strip off to attach to the wall(if you have to remove it, it most likely will peel some paint) I used 3m Velcro and they worked well! A very clean look with no additional holes in the wall for an inexpensive purchase.

Worked perfect to hide my cords. Good color selection too.

I'm moving into a new place and wanted my cables to be better organized and hidden than they were in my old place. This kit wasn't the cheapest one available, but it seemed to be the most complete, so I went ahead and got it. I'm very happy that I did.I have a fairly extensive collection of media, so my home theater setup is fairly extensive as well. Besides my TV and receiver, I have a Blu-ray player, LaserDisc player, VHS, turntable, cassette deck, computer, and game console. That's a lot of cables, and it did tend to make the setup look pretty sloppy. This kit, with a little bit of advance planning, has neatly organized that mess and made it look presentable.The kit comes with a solid amount of track, which was plenty for me to run all of the cables in my complicated setup, and plenty of connectors. There are two reasons I did not give it five stars:1) The adhesive on the back of the track is strong. Perhaps too strong. Spending some time in advance planning where you're going to put everything is critical, because if you make a mistake, you WILL lose a layer of paint! I can speak to this from experience, unfortunately, but a little touch up made it look as good as new.2) There are a lot of connectors, but not always enough of the ones that you actually need. My complicated setup called for more than two t connectors, but that's all that were included in the package, while I had far more elbow connectors than I could possibly use. Unfortunately there seems to be no way to order just the connectors, and the manufacturer provides no contact information to inquire about purchasing them. I was able to hide the missing junctions behind some equipment, but it really would have been preferable to install them properly.Overall, I highly recommend this kit for anyone trying to run signal or electric cables and cords. It makes for a highly polished appearance and is easy to use.

Absolutely perfect! I got all i needed put up plus some. The length of each was perfect and the total feet was perfect too! Super strong adhesive and also came with quality screws? Could ask for more! Will definitely be buying this again or recommending them to a friend

it way to hide ur wires

There work so nice. Have used them many times before. One warning though, they will pull off your paint if you try to remove them. A blow dryer to heat up the glue helps a bit.

I currently live in a rental (townhome) and needed a way to run an ethernet cable up to my room without it looking absolutely terrible. We just upgraded to gigabit internet and the wifi was only giving me a fraction of the available bandwidth. Plus, I wanted a hard wired ethernet connection for my PC and Xbox. I originally just ran the cable using those plastic clips you nail in. It looked pretty bad. So after a little research I settled on this cable management trim. Here's why this stuff is great.1) It comes in 4 colors (black, grey, white and beige) so you can usually make it look good without having to paint this trim/cord cover.2) Not everyone can run cables through either their walls or basement, or rather it can be a real pain (especially for two story homes or ranch style homes with a finished basement/drywall on the basement ceiling). Also, this is a great option if you are living in a rental and need the ability to quickly revert the dwelling back to the way it was before moving out.3) If you use clips to run a cable then A) the cable is exposed, B) you have to keep tension on the cable, otherwise it looks really bad not being straight and being slightly curled. This trim solves that issue because you don't have to worry about having tension on the cable. Plus, it looks really unprofessional doing it with clips unless you are running the cable in an unfinished basement or something of the sort.4) This stuff has the adhesive tape already applied which makes installation go much faster than with the ones that require you to cut the tape to size and apply it yourself. Plus, this stuff sticks REALLY well. It sticks so well that I hope it doesn't cause damage when removing it. It probably won't, but I'll find out when I move out...5) You can either slide the top part of the trim on or just bend the base part a little inward once it's adhered to the wall and push it on. This is great because when you get close to corners it's much easier to attach the base part first, then put the top cover part of the trim on vs. having to slide it on.My only gripe is that there are no 45 degree couplings. They have every possible coupling except that one. It would have been nice because as part of my run I ran some trim up my staircase near the trim at a 45 degree angle. I don't have a coupling at the bottom and top part of that run because of this. It would look a little nicer/more professional if they included this type of coupling!I am very happy with the result. If I ever need to run cables and can't do it through the walls or basement, this is the way I'm gonna do it from now on.