Nilight 90101E 5Gang Multi-Function 5 Gang Rocker Dual USB Charger + Digital Volmeter +12V Outlet Pre-Wired Switch Panel with Circuit Breakers for RV Car Boat Truck Trailer,2 Years Warranty,Blue

Nilight is becoming one of my favorite trusted electrical components within my typical budget. Never breaks the bank and does a darned decent job. The jumpers are well made, clean and way better than I'd make on my own. They make it easy, even if you are not an Electrical Engineer or EET, to try some DIY wiring. At least the power leads are tinned, and I suspect the jumpers are as well (just can't tell without scraping one to find out) so this has potential for remaining functional for several/many years. With rocker switches, there's going to come a time when corrosion comes into play, and the actual switches will be a bit vulnerable to corrosion. But, they're definitely somewhat water resistant. They're a great size to save a little space, and they're not as prone to being easily knocked into the on positions. They feel secure and solid, like there's a substantial switch at work. Very positive tactile feel when you flip the switch. The other style of rockers that are common are so much easier to trigger/knock accidentally, I prefer these 100%. Each switch has a moderate light, that consumes insignificant electricity. Nice feature, especially when in the dark. The USB plugs are nice to have. You can choose your type, for maximum flex, I went with two USB A ports. The QC3 USB C was intriguing, but there's better tech anyways, and more of my stuff is usb A to USB C. 2amps is not bad at all.

Looks great, I love the quality and it definitely does the job. Holds up well to water exposure so far also. Used this on my 1436 jon boat project with an Amazon mud motor build.

This rocker switch works great. The instructions were very clear. The labels have great adhesion to the switch. It is very durable. The led works well. The wiring is easy to attach. It is a great size for its purpose.

Feels like good quality, solid wiring, sleek look, little lights not too bright in your face, cut to fit fairly easily if you can cut accurately (only about a 1/8 margin for error) Negatives are that every single thing on the (negative) circuit has to be in one giant clump or individually run back to the battery. My console where the panel is is mid ship and the battery is in the rear like most boats. So either group all negatives under the console and run a larger wire back to the battery, or a terminal block on the battery for each of the 6- 5 and the negative for the panel so the little LEDs light up. Not terrible

Worked great just wish voltage lights would shut off with a switch will drain bat

Nilight makes quality products, I have been using them for the past 7 years. This switch panel is exactly what I needed and operates perfectly. Inline fuses and easy wiring make this a win.

I've used Nilight switches before and have had good service. Positive - They are overall good quality. Sturdy aluminum mounting plate. The voltmeter is clear and easy to read. Includes inline 20 amp fuses for each circuit. These are very nice looking switches! Negative - Nothing really negative, just a few things to note, see below The LEDs are ON when the switch is OFF. This is backwards to me. I solved it by removing each switch and turning it upside down. This isn't a perfect solution because the switches have a small 'key' at the 3 o'clock position (looking at the front of the switch) But I was nevertheless able to mount them 'upside down'. Of course the LED's are now upside down as well, but it looks fine and it's not a reason to deduct a star. Second thing; the terminals aren't the standard 1/4" size. They are the smaller 'audio' style. The regular 1/4" connectors won't fit properly. Last minor thing, the supplied connectors lock on the terminals and you must push a small latch to get them to release. It can be difficult to do without a tool like needle nose pliers because the terminals are close together. The adhesive labels are a nice addition to the product, but if you're not installing it on a boat they're not really appropriate. I made my own with adhesive inkjet labels.

Good price worked good

ممتاز

Good quality! So easy to instal

Love it! Perfect size.

I use this to hook up lighting and accessories on my older cedar strip boat. It was easy to install and worked very well.

Works great, easy to install, did remove individual fuses and wire to fuse panel works perfect in boat. Quality is better than I expected. Good product.