🎙️ Elevate your sound game — pro audio made effortlessly smart!
The Audient EVO 4 is a compact, professional 2-in/2-out USB audio interface designed for recording, streaming, gaming, and podcasting. Featuring dual transparent EVO preamps, ultra-low latency, 48V phantom power, and an innovative Smartgain auto-leveling system, it delivers studio-quality sound with intuitive control. Its loopback functionality and included software bundle make it the ultimate all-in-one solution for creators seeking seamless, high-quality audio production on Mac and Windows.
Product Dimensions | 6.71 x 14 x 6.71 cm; 585 g |
Item model number | EVO 4 |
Colour | Black |
Compatible Devices | Personal Computer |
Hardware Interface | USB |
Supported Software | cubase,cubasis LE 3 |
Size | EVO 4 |
Operating System | Windows, Mac |
Item Weight | 585 g |
Manufacturer | Audient |
Country of Origin | China |
K**A
Great Headroom
Great Headroom with Studio Level Output. It’s a 8 channel mixer with 2 Stereo Outputs. Just go for it you want a Compact mixer at budget.
S**D
Hassle-free no-nonsense audio interface that also works flawlessly as a DAC/AMP
The Evo 4 is a great beginner audio interface that also doubles up as a DAC/AMP and works quite well. It has helpful features that make the setup process easy and hassle-free, especially if you're new to using an interface. Features like smart gain, phantom power, audio loop back and monitor mixing make it easier to work with and this is all brought to life in a small form factor that's easy on the eyes. It is connected via USB-C to USB-A and works flawlessly. It comes bundled up with free downloadable software that is made available once you have registered your product.This is has replaced my Soundblaster X G6 and is quite a step up in terms of audio quality. Using the setup with a DT 900 pro X and an Audio technica ATR-2100 USB connected via XLR.A few tips for potential buyers:For a single XLR mic connection, be sure to plug your mic into the second channel for stereo recordings.The chat/monitor mix does not work with a separate dac/amp or sound source, it only works when you have your input and output connected to the EVO 4.Dynamic mics don't usually need phantom power so you should be fine without using it when setting one up.You are able to control every setting through the downloaded app and through physical controls. Getting used to them might take a day or two, but once you do, it makes it very easy and intuitive and you'll be surprised at how effective it all is.
M**I
It can be controlled via DAW. build quality is not at all good.
it has all good features, can run 250ohm headphones, 96k sample rate, preamps are actually good sounding than anything in this price range, not even scarlet.has better dynamic input range, matter of the fact its very decent for even mid range interfaces.and also can be used with ipad.
A**E
Great !!!
Great system. Sometimes it gets disconnected if a little movement is done. I tried different cables, but the result is the same. The cable provided with this is problematic in my case. Apart from this, the interface is great and the software is the best.
U**R
Does The Work
I have been using the Evo 4 for over 2 years and am very satisfied with the output and functionality. All in all, it does what it says and offers little to no noise when using with a variety of instruments. I've tried it with Electric guitars, keyboards, ukuleles, condenser mics as well as dynamic mics, and all have been satisfactory.
P**H
Good product, Worth the purchase
Worth purchase for someone who needs 4 microphone inputs at the same time. Works fine Waveform DAW and other DAW's, but if you're using Audacity then You should change the DAW because it can record only 2 inputs at a time..All the 4 mic inputs and loopback can be used at same time ...Compact for someone needs a portable deviceSome people complain about plastic build quality but it's fine, nothing to worry about.
D**S
Compact with many inputs, Issues on Windows 10, Latest Driver Failure on Mac - Updated
The delivery from amazon has been perfect and item arrived in a nicely packaged box. The box has a quick start guide, USB-C to USB-C cable which is suitable only on latest Mac laptops or computers or laptops with USB-TypeC. The audio interface is designed to work with USB c computer port as mentioned in manual if you are using regular USB-A port only 2 ports you can use the Phantom power.I have tried to get started with EVO 8 on Windows 10 registered running latest software. The driver software failed using the latest version and even I tried pre-dated versions. Ran as an admin too. Looks like others also faced issued with installer getting stuck. So as per the support, unplug the device from computer and just install the software or install in safe mode. I am yet to check this.Update:So I am now able to use the latest versions of drivers on macs and windows. Installed one of the oldest versions and post that when latest version is updated it picked up and installed. When I tried on my newer macbook with latest MacOS the drivers installed fine. The device wasnt detected without the evo app installed eventhough that is mentioned in the manual. I had to install the software and restart Mac to get everything working. A thing to also note here is connection was usb-c to usb-c. I also feel that when full power usb c is used, the overall mic levels are better. I was about to return a Sennheiser E835s due to very low mic gain. Looks like it is passable now. I am getting an akg condensor and shall post the details on how it went.I then used my MacBook o install the driver. This is the first step after connecting EVO8. The latest mac driver didn't work so I had to pick an older version which installed well and opened the screen to create my account and register the device. Post this, the firmware is updated and the device is live on my MacBook.Windows is yet to be done. I have to sort the driver issue. I have connected a dynamic MIC and its showing up the levels in EVO. Set the Mac audio device for both input and output as my EVO8. Now next step is to enable monitoring via headphone for the mic voice. As of now this is not working. iTunes audio is coming in and I can hear it well in the microphone interface. So now mic also has to be looped back.Update: The mic gain control is hidden and all volumes are muted everytime you connect the device. So enable mic controls and increase the gain.I am yet to download the free software available and shall post how it goes. Cubase LE seems like a fully featured software in contrast to Protools First etc bundled with other interfaces, the protools first is discontinued as well. I have downloaded the Cubase software successfully and it looks very feature rich. You wont need anything beyond this for most of the DAW role for home studios with all the needed features for a good production. Audient has also added a training series worth $199 and I have downloaded to have watched the first session. Its decent and helpful with good advice.So far the experience has been not that great basically due to bad incompatible drivers which are not backward compatible too. Means you have to identify the right version that goes with your OS version. And so far it works on Mac that too with an older driver and not on windows. Unless you are not very technical and you are not running the latest version of OS you will have lot of issues. A device that talks about meant for beginners and quick start, this is far less than a quick start.Also I can confirm that the auto gain setting is a hit or miss. Tried with electric guitar, two dynamic mics.Summary:1. All drivers on both mac and windows work but you have to fiddle with it.2. Auto gain is not very useful. Doesn't work most of the time.3. Good versions of bundled software and training material.4. 4 combo inputs makes it versatile.5. One dedicated instrument HiZ input to go with.6. 2 mic outs with dedicated artist mix.7. Not suitable if you are not very technical.8. A good software mixer for full control.9. Cubase LE mobile is available and is available for ipad, andrioid and ios. Says it supports EVO4, so I am hoping EVO8 also will work. Need to find the right adapter.10. Smule / Starmaker support is yet to be checked. I am hoping it will work with the USB interface done. (While EVO 4 seems to have IOS Support the audient website says EVO8 doesn't have it).
R**J
Wonderful gear for home recodring
Amazing .. superb quality.
Trustpilot
2 weeks ago
1 day ago