ASUS ROG Bezel-Free Kit ABF01 Universal Multi-Monitor Setup with Optical Micro-structures Easy Assembly, CLEAR, (Set of 2)

The media could not be loaded. they do work on curved monitors and you can get them to flawlessly mesh two screens together but the stock brackets are not that strong for holding the glass in place so i 3d printed clips to force them to grab the glass tighter and to get it to show no lines in the middle when using this only worked flawlessly because i 3d printed a monitor support for the bottom and back of the monitors to hold them perfectly together at the correct angle so i basically paid a hundred dollars for the glass lol which to me was worth it because the end result is what i wanted but if i didn't have a 3d printer for supports i would've returned them because its a pain trying to install it and get monitors to be perfectly together so splitting and warping effects don't show from them not being perfectly together and its probably my ocd talking about that but yeah, if you have a 3d printer the effect can be perfect for use on curved monitors that is but they do say that they’re made to be used on flat monitors so maybe that way they’re a-lot easier🤓🤘

These are super awesome. I love the effect they give on my racing simulator. The only issue I have is that my monitors are a bit too large so I need to purchase the adapter kit for 32 inch monitors. A bit pricey, but worth it in every aspect.

This bezel kit works well with a little bit of adjustment so understand that it’s not just a 5 minute setup but it’s a great product. The only downside is the price.

Product is ok. However, seller didn't mention that the item is scratched and the “cardboard” to angel the monitor was missing from the box.

Was almost about to send this back as the lenses and attachments are very finicky, and the lenses are VERY VERY delicate and scratch easily. My first attempt to attach them caused one lens to drop to the floor, somehow got scratched on the way down. Long story short, I have a couple scratches, one quite noticeable in the pic on the left side mid screen, but once you do get them on they look pretty darn good and hide the bezels very well.When installing them the instructions say start from the bottom, don't do that, much safer and I think and easier if you attach the top section first, then slide in the bottom section. There is not a lot of lens overlap, at least on my ASUS TUF 27" monitors and the "clips" really don't hold the lens securely at all (another part of the problem). Another recommendation would be to use some tape (I used a strip of duct) to secure one of the arms on the lower brackets to the monitor, just to prevent it from accidentally coming off and getting damaged.Also way too expensive for what you get, should probably be around $24.99 MSRP...

I got this for 2 32 inch 1080p monitors, I know the max is 27 inch but i read another user's review, and they said it could be made to work. The 120 degree angle is steeper than you might imagine so if you have a monitor stand, make sure you can get 120 degree angle. If you take the time to set it up, it does what it says it will do. The angle is the most important part. Also if you turn overall brightness and contrast down, there's a lot less interference in the lens area. I couldn't find any other product like this, I just wish they made a bigger one for 32 inch. it does cover the screen area but there's a little position indicator right at the top, no hard feelings though, they said 27 inch max. as for bezel width, half inch each was no problem for me. I used velcro at top and bottom to hold the strip in place as again, it isn't made for 32 inch. Since I only had 2 monitors a gave the other lens to my little brother for his 2 27 inch monitors and he loves it. It was quick and painless to get his set up.

The idea of cutting the gap between monitors for gaming purposes is such an appealing idea especially now that wide screen gaming is much more popular especially in the racing gaming arena. The idea that you can use your three monitor setup without gaps is just too good to miss out on.Unfortunately this product does not solve the issue. First and foremost, the plastic fresnel lenses are very fragile, I wasn't being rough with them but the slightest movement with the bracket caused the first crack to appear. Another crack has appeared through later tiny adjustments. Please bear this in mind as it becomes more important later.Assuming the gap between monitors is about an inch then these lenses will require you to put a huge angle to get rid of that gap. It is not a comfortable angle at all and seems to have been designed with no day to day function in mind. This means that once you have finished gaming you have to take these off. Yup, the two hours you spent trying to make it work is now undone, because you need to reposition your monitors to be useful for none multi monitor gaming. You then have to refit it, mess around trying to get rid of the gap, off on, off on, crack. These things will last about a month tops when used this way.The Fresnel lens causes all sorts of distortion and ghosting of the image behind it. The cursor doesn't appear and things are duplicated. About 4 inch of monitor real estate becomes the badlands on each side of the center monitor. You can't leave these things on if you use your monitors for more serious work or business. They just ruin the experience and you lose so much screen real estate avoiding the badlands.So I do think it deserves one star. If you are a driving game nut and you really want that experience without the gap then this thing will do that for you. But for everyone else, avoid this like the plague.