OwnMyOwnMy 80mm x 24mm Luggage Suitcase Replacement Wheels, Rubber Swivel Caster Wheels Bearings Repair Kits, A Set of 2

My daughter has a Jansport Driver 8 that she used for less than a year and on the first day of the new school year, the tread on the tires already started to peel off! Jansport has a limited lifetime warranty but you have to send the backpack back; she needed it for school so that wasn’t an option. Found this item recommended on a Reddit thread for people with the same issue and I highly recommend it! A quick 5 minute replacement using a Phillips screwdriver and she’s got a smoother rolling backpack. Great value, the size is perfect for the wheel well. There is no noise when she walks with her backpack! I used 3 washers (included) to prevent the wheel rubbing against the inside of the wheel well. No need to buy another backpack!

These replacement luggage wheels are at least as good, if not better, than those you are replacing. High quality rubber and heavy duty bearings make these quiet and smooth with no pulling to one side. Amazon ships the new wheels, new axles, parts, and 2 hex tools in a ziplock. Two sizes of axles and extra washers are included so you can install the wheels and not have any drift or wobble. The axle hex screws even have a dab of loctite. My twenty year old TravelPro had wheels with cracking rubber and the manufacturer no longer provided parts. I used a pair of calipers and a straight edge ruler to measure the old wheels. It is important that you get the measurements correct to within a few millimeters. For removal and replacement, I needed a hand-held drill to drill out the old axles, a philips screwdriver, pair of pliers, pair of 4 inch vise-grips, a sorting tray, some blue tape, about 2 1/2 hours, and plenty of patience. Your experience will vary and if you are not the "handy" type, or if your luggage is really cheap, this will not be your best solution. I spent approximately $15 and my spare time, saving the cost of new luggage.

Bought these for a well used older Victorinox roller bag from which the rubber ring around one wheel simply disintegrated. I contacted Victorinox for a replacement and was told they no longer carry the part. (Disappointing for premium priced company that prides itself on quality.) I was given the name of a luggage repair business 1500 miles away which, when I called was told they would not sell the wheels but I could pay for shipping the bag to them and they would repair it. (Likely cost as much as a new bag.)Amazon to the rescue! Although not designed as a direct replacement because the Victorinox bearing had a deeper design, I was able to use the wheels by putting a washer between the wheel and the bag. Works great, rolls smoothly and quietly. Thanks again Amazon and MyOwn.

Appears to be as good (might be better) as the OEM wheels. It did take DIY expertise / skills. Use will tell if these hold up to the airline luggage "gorillas" which was why these replacements were needed. Yes, measure twice (or even thrice+) before buying.....

Good product - tested on international flights - still good!

Good replacement for my wheels that fell apart. Seems sturdy enough. Easy to install

The wheels themselves seem sturdy and durable and they were relatively easy to install…but that’s the end of it. The axel mechanism is faulty in that the nuts holding the wheels need to be so tight in order to keep the wheel from wobbling and the bolt from loosening, that the axel assembly actually gets hot to the touch from the friction. I found this out after my first trip to the airport after changing the old wheels for the new. I noticed that the wheels seemed to be wobbling. Luckily I brought the Allen wrench provided, but when I went to touch the outside of the axel, I literally had to jerk my hand away, the axel was so hot. Incredibly poor design. Would never recommend this product to anyone except to someone I didn’t like very much.

We were on a recent trip and discovered that the outer softer plastic layer on the suitcase wheels was coming off. The suitcase is a Pathfinder full size that is about 20 years old. The wheels are slightly more than 80 mm. The wheel housings come off relatively easily with phillips heads on the outside and acorn nuts on the inside. However the wheel axels use a rolled over edge on the inside and are set in a cutout on the outside. I eliminated the rolled edge using a drill and then tapped them out. The kit includes everything that I needed except: 1. I had to reduce the diameter of the axel pin heads with a grinder so that they would fit in the cutout, 2. The width of the existing wheels at the bearings is more than 27 mm so I had to add a thick washer to each side to take up the space (the washers that are included in the kit are too thin), 3. For additional security, I used red high strength loctite on the axel pin threads. It took about two hours from start to final cleanup. The main slowdown is the learning curve. Definitely worth the effort if you want to avoid the cost of a new suitcase.