Super 3D Pen

A few years ago, I purchased a different 3-D pen, and had problems with it. I sent it back. A while back, I decided to take a chance on another 3-D pen, so after reading lots of reviews and watching lots of video, I bought the Mynt3D Super 3-D pen. It was extremely easy to learn and use. I made crafty things and I used it to build small characters. I even used it to put together a HO-scale train engine for my train layout, using parts from a couple different engines. I absolutely loved the pen! A few weeks ago, the motor suddenly stopped working. The pen would heat up and the lights would display as normal. I first contacted Amazon, since I bought it through them. The customer service rep I spoke with was very helpful as far as taking information and trying to trouble shoot. However, he was not able to fix it (obviously), so he contacted the manufacturer and completed the warranty information for me. The very next day, I received an email from MNYT3D asking for a little more information. I responded and waited a week or so. Apparently they had responded back and the email must have gone to my junk mail because I missed it. When I emailed back to see if they had received my email with the extra information, they replied that they had, and that they had sent an email asking if my mailing address as listed was still correct. I replied that it was, and less than a week later MYNT3D sent me a brand new product. Not just the pen, but the whole box with the power cord, little tools, and the extra ABS filament. A whole, brand new, unopened box! This is the type of customer service that keeps customers coming back! I very much appreciate their quick response, and their standing behind their product. I emailed to ask if/how they needed me to send the broken unit to them, and they told me I didn't need to send it back. So far, the new pen is working perfectly. When it does eventually wear out, I will not hesitate to order another one from MYNT3D. I've even let others try it out, and they loved it too! As long as this pen keeps working, I'm definitely a satisfied return MYNT3D customer! I highly recommend anyone purchase this pen and give it a try!

If you are looking for a gift that pulls kids away from screens and into hands-on building, this combination is a home run. I’ve found that the MYNT3D. it’s actually one of the most kid-friendly setups available. Easy to melt, easy to hold, and easy on the wallet. This is a top-tier creative kit that makes 3D modeling accessible for the whole family! Note for Parents: While the pen is very easy to use, the nozzle does get hot! It’s perfect for kids (ages 6 + with supervision) who are ready to move beyond basic toys and start making real art.

Pen is good, not much instruction. Limited to the complexity it can achieve . Fun to learn with.

I bought this 3D pen for my nephew and he was obsessed with it. It kept him entertained for hours, and he picked up how to use it pretty quickly. It’s fun, creative, and a great way to get kids thinking and building. The pen works well with both ABS and PLA filament and heats up fast. Controls are simple, and it feels sturdy enough to handle regular use. One tip: definitely order extra filament. It goes fast, especially once they get the hang of it and start making bigger projects. Overall, this was a great purchase and an awesome gift. I’d buy it again in a heartbeat.

Worth every dollar, heats up quickly and lets you adjust the speed you feed the filament. Bought 2 for my kids and was a bit worried but they turned out to be very user friendly, came with filament which was real nice and easy to find filament as well, also filament is pretty cheap IMO, kids age 7&10 if that helps, just buy it !!

Loved my pen so so much, bought in march 2025. I use it almost every single day. I make all kinds of things. Mostly i use it to fix my 3d printer prints when i have a fail. Or if they are a complete disaster i recreate them into something else. Then i clean up the model w tools and paint it all up. I have also done many free hand designs with this pen. It is Amazing Right?? 😢😢😢. Until it stopped working last night. I am trying to contact customer service through the company. I can’t through amazon at all. Its obvious past the amazon return window . But has the seller warranty if they do infact get back to me. I would love to use my pen again. I guess if they don’t contact me i will leave the review as is. If they contact me i will update with them hopefully sending me the replacement. If not i guess i have to buy myself the professional version. If i go that route i am guessing i need to try to find a rechargeable one.. pros 🤓🐠can make anything you dream of practice, practice 😄Can be used to repair 3d printer fails 🤓Use it to recycle 3D printer poop and supports and rafts from 3d printer. 💜Can make pretty intricate designs ❤️So much fun I think this is for most ages 6-106 if properly supervised. And if trained to keep fingers off hot end. Cons 🥲 it died after 2-3 months The other slightly annoying thing after not using it after about 60 seconds it goes into a sleep mode. Then you basically push the extrude button to power back on it reheats and you go again. Not a huge deal definitely a safety feature because you could walk away and forget to unplug and catch house on fire. So actually not annoying after all. I do wish it was cordless reachargeable so i wouldnt be stuck to a socket. Lastly Whyyyy Did it die in only 2 months??? Customer service please help a girl out. This is my very first 3d pen i loved it till it died. Enjoy my artwork not perfect but i am still improving and teaching myself new things. So the dragon the supports failed during printing this beautiful dragon for myself . I am not the designer of the original dragon. I found it on makerworld to print for myself for free. That is important to mention. Since it was trash it or remake it w the 3d pen i chose remake. The legs, feet, claws, parts of the wings , and parts of the face are made with the pen. Also i made the cliff myself as well. I used PLA supports and rafts from other projects to help form this rock cliff. Then i attached the dragon to the cliff face with the pen. Then i started reforming legs feet and clawswings and and face. Then i went out and sprayed the entire thing w rustoleum black spray paint. Dry over night. Then i drybrushed all the Metallic paints on then sealed w rustoleum clear coat in satin. I like to clear coat my items. I used all acrylic paints for my painting. Sometimes i use acrylic markers too which makes some items much easier to paint. I haven’t painted the unicorn/Pegasus yet. On her i made the horn, mane, flowy tail, and wings. And the extra designs on body. I may have over done the curl wig on the head. I probably need to trim it back and sand before painting. But hey its fun to play. These are just some of my Frankenstein creations that would have been trashed but i kinda saved them. That’s to the awesome pen. She is from an artist that i subscribed to on Patreon. Once in a while i have a failed print. Again pen why did you have to die

My kids love using this thing and make little objects for themselves to wear. Basically works like a (very cheap) 3D printer / glue gun combined. Does not come with much filament, they went through it within an hour but I found some filament on amazon that is a really great price and would probably take us a year to use.

Es un buen artículo y funciona muy bien.

Som total nybörjare med 3d penna så tycker jag att den är helt okey. Om jag skulle köpa en idag hade jag valt en med display för att lättare kunna ställa in temperatur för olika typer av filament. Det tar ett tag att lära sig hur man använder en 3d penna. Men man kan göra rätt mycket. Kolla på youtube där finns en massa bra filmer och tips.

We are thinking of getting a 3d printer and my daughter wanted to try a pen to see what she could make so to peak her interest I bought her a cheap one from ebay. It came with the wrong filament (abs not pla) and within 30 mins of using it the nozzle came off and it was broken so I searched around and found this one. The difference in quality is apparent the moment you open the box. She loves this one and finds it easy to use to design her creations.

If you're still thinking about whether this is a good investment, take my word for it and buy it