Analog inputs The analog inputs are used to measure continuous voltage outputs generated by various sensors such as temperature, humidity, position or pressure. Phidgets offers a variety of sensors that can be plugged directly into the board using the cable included with the sensor. The sampling rates can be set to 1ms, 2ms, 4ms, 4ms, 8ms and a multiple of 8ms to 1000ms. Digital inputs The digital inputs have a hardware filter for digital inputs to avoid electrical interference. They can be used to transmit the state of devices such as push buttons, limit switches, relays and logic levels. Digital outputs The digital outputs can be used to control LEDs, semiconductor relay transistors; in fact, anything a CMOS signal accepts. Board features - USB voltage: min. 4.6 V DC Control via USB (mini USB). - USB voltage max. 5.5 V DC - Power consumption min. 13 mA - Power consumption max. 500 mA - Available external current 487 mA - Recommended cable cross section 16 - 26 AWG - USB Speed Full Speed - Operating temperature min. 0 °C Operating temperature: max. 70 °C Supplied with: Hardware Installation Kit: 4x M3 screws (2 cm length). 4 x plastic spacers (5 mm length). 4 x M3 nuts.
Trustpilot
4 days ago
2 months ago
