Reliable Cable 4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with Passive Return, Coax Cable, F59 Terminators (Antronix MRA4-8)

In short, I would buy this product again as it is a good value and does exactly what it is designed to do - distribute TV signals to multiple TV's without signal loss. After reviewing all the antenna amplifiers to support 4 TV sets I landed on this one. The reason for my selection was price and the kit contained all the needed components for the complete installation including the 75 ohm terminating resistors for unused outputs. This amplifier works well and all TV's are receiving a solid signal from a single rooftop antenna. The antenna receives all the major networks and now we are able to distribute that signal to all the TV's in the house via the existing in-wall coax cables to each room. Note - this amplifier is not suited for exterior/unprotected locations. That was not a criteria my the selection as all components are located inside with the exception of the antenna. Also, use good quality coax cable for all connections - RG6 quad shield cable is recommended as this eliminates interference and signal loss for longer runs. Finally, this amplifier is not intended to nor will it fix a poor signal from the antenna.

Great little unit. Compact size, easy to mount out of the way. Seems well built with nicely spaced, quality connections. Does not get hot like other units, barely even warm. Instant signal improvement to TVs at the end of 30-45' runs. Added 15-27 pts on TV signal strength meters and gave me more channels! I have not noticed any added noise. One little tab of the plastic cover on the power adapter cable was broken but this was insignificant and does not affect function. Approx 2 weeks use but so far so good!Side note: Customers should ensure their antenna is properly located for a strong input signal. Once that is done, this thing will send it where you want it!

I live in a near rural area and can receive some over the air signals clearly but I wanted more, as not all of the local channels were coming in clearly. I'm using an outdoor antenna mounted to a second floor window frame. It could be placed better bit it's convenient where it is. The antenna I'm using came with an unbranded amplifier that had an adjustment and with it I receive 25 channels including all the sub channels. That amplifier literally fell apart, so I ordered this unit to replace that original amp.The build quality of this amplifier was far better than the one it was replacing-solid, well made metal housing, finished nicely and nothing loose or flimsy. This is the type of amp you'd find in the 1960's or 70's when electronics were made to last. It was easy to install and did a very good job of boosting my closest channels so they were crystal clear. Unfortunately, with this I only got 7 channels total from my new channel scan. I have no doubt this provided a clean signal, but I was missing some channels I had received previously. I did end up returning it, but if you're closer to the towers than I am this would be a good choice for a high quality amplifier.

Worked well. Finding the best place for the antenna is key. I tested the antenna by itself and found the location that had the strongest signal and where I was picking up the most channels. The total amount of channels I could get without the booster was 14 channels and I wasn’t receiving all the local channels. With the booster I was able to receive all the local channels plus many more for a total of 45 channels.

Worked well to split antenna signal however cable did not work well at all. Very fuzzy picture and trouble finding channels.

Product appears to be made with quality in mind. installation very easy, However I went from 30 channels to 16. which means this product was not compatible with my external antenna system. The return process was user friendly a refund in the form of an Amazon gift card was issued very quickly. unfortunately not a merchant refund to credit to card.

Details on my set up- I live about 35 miles from the major network towers in my area- I had one omni direction antenna mounted on my roof and pointed in the direction of the major towers (i now have two, more on that later)- I have 5 TVs connected using the old cable company splitter box and cables- Cable distances range from 20 feet to 100+ feetFor about 5 years now this on its own has worked for me, the exception being during bad weather and one channel in particular that was always hit or miss in working. I have been testing ways to fix the weather issues and get that one channel that is hit and miss and this seems to be doing the trick!I like that the amplifier is built into the splitter itself, eliminating the need to add an inline booster of the signal before it enters a traditional splitter. This splitter is also built specifically to handle the amplified signal and to "turn off" unused splitter ports (which helps to increase the signal as well). If you are having issues getting a signal in this type of set up it is most likely the splitter and not the cables/antenna/tv's. I would encourage people to start here and then move out from the split to address issues with signal strength.I did add a second antenna and "bonded" (using an antenna duplexer that has an LTE filter built in $20 on amazon) the signals together which is giving me an additional signal boost.I am now able to get all of the channels regardless of the weather including that one that was always escaping me.I can only attest to this products usefulness as it pertains to over the air HD antennas. I do not know how it does with traditional cable/satellite/broadband signals

I used a splitter to add a my internet router to my cable coax and the TV kept going out intermittently. The cable company told me that would be okay. It wasn't. This powered splitter has everything working great!

Product was the same as what my cable company would have installed if not for covid but I was able to order it and install myself. The price dropped right after I purchased it and the seller refunded the difference with no problem at all.

This was very easy to install and worked perfectly - improving cable signal on higher channels.

Ok