TREATLIFESmart Switch 4 Pack, 2.4Ghz WiFi Light Switch Single-Pole, Neutral Wire Required, Works with Alexa, Google Home and SmartThings, Smart Home Remote Control, FCC Listed

General info about the switches:Let me start off by saying this is not a paid review. I had been looking for a smart switch for a while now that was reliable, cheap, and easy to use and install. I found it with this switch. This switch is a single pole switch and can be used on any type of light as long as the total usage does not exceed 1250W, 10A or 5A on incandescent. I installed 3 of the 4 so far. One is in the kitchen on a florescent fixture, another is installed on the back porch used to control some incandescent flood lights, and the last was installed to control just a ceiling fan alone, not the lights since they are on a 3-pole switch. Well it has been two weeks since they have been installed and they have worked flawlessly. Every switch comes with a pack of wire nuts to easily intergrade them into existing wiring, and every switch comes with a screw less face plate as well, which was a nice added bonus.Smart Home Integration:Getting these switches integrated was easy with Alexa but not as easy as it was with google home. First you download the Smart Life App, I am using an Android, once you have created an account just tap the + button in the corner. Follow the steps and it will set up within a few minutes. There were two things I noticed when setting up:1. If you have a home network that is 2.4ghz and 5ghz that share the same name, SSID, and the device chooses the best bandwidth for the connecting device, you will have to separate the bands to get these to work. Not really too big of a deal and by no means a deal breaker.2. The rapid blink set-up would not work and I had to use the slow blink method which requires you to connect your phone/tablet to the switch then enter in your SSID and password. Again, not really an issue but I am glad they have thought of multiple ways to get it connected to your home network.As for integration into the individual apps be it google or Alexa; google home was easier. When setting up in Alexa it would not find the switches automatically and I had to scan the network and add them into individual groups one at a time, again not really a big deal just a few extra steps. For google home, I selected add device and It found every switch at once and integrated the name they we called from the smart life app and automatically grouped them.Overall thoughts on the Switches:I am glad I chose Treatlife as the smart switch for my house. It does everything that their site lists and more. It was easy to integrate and looks loads better than what I original had in place. I have not had a chance to test out the scheduling that is built into them but will in the future. I will be ordering the other varieties they have as well, the dimmable ones and definitely a 4 pack of the 3 pole ones to control the light on the fan that already has the single pole one.

I bought these smart switches because I wanted a uniform look throughout the house and I had a variety of switch types to replace. We have standard on/off switches, but we also have 3-way switches and a dimmer switch. Furthermore, I wanted to replace the need to pull fan chains with dimmer switches as well. I found several companies that had on/off switches that looked nice or dimmer switches with cool functionality, but this was one of the only brands that had all of the types of switches for which I was looking.Being firmly entrenched in the Google ecosystem (my wife, daughters, and I all have Pixel phones, we have Google Home, Nest Minis, or Hubs in every room, and we have Google Nest Hello doorbells), I really wanted something that would work with Google Home as well.Finally, as we have over forty switches in our home, I wanted something that was a little more budget-friendly. These Treatlife switches seemed to check all of the boxes, so I bought a four-pack of each of the three types for a first run: standard on/off switches, dimmer switches, and 3-way switches.When they arrived, I briefly read through the instructions and pretty much jumped right in. If you've ever installed a light switch before, this really wasn't anything new, but, even if you haven't, the included instructions make it simple to attempt for the first time. There's also no guesswork involved since, as opposed to the screws on the back of ordinary light switches, these smart switches come with color-coded (as well as labeled) wires, a few inches in length, to which you make the connections using included wire nuts.All the necessary hardware is also included in the box. As mentioned above, each switch comes with four or five wire nuts (depending on the switch type), as well as the screws to affix them inside the junction boxes in the wall. They even come with screwless, snap-on faceplates, which look really nice, but which I opted to forego because, as mentioned above, I was looking for uniformity throughout the house. No sweat, though, because I was able to pick up a ton of matching faceplates from Home Depot for just a few bucks, and these smart switches work with any standard faceplate.That is not to say that everything was sunshine and rainbows. I did have a few issues during the installation phase that I should probably mention at this time, but I believe that most of them are due to my unique situations.The biggest thing that I ran into was that, being smart switches, there's a lot of electronics that go into them, and those electronics take up space. The "inside" of the switches, the part that goes into the junction box, are significantly larger than a standard switch that only goes in as far as the toggle mechanism and screws require. This isn't a problem for a single light switch in a junction box made for a single light switch, but, as things scale up, fitting three switches into a triple junction box along with all of the wires going to all of the various fixtures, things got a little tight.On a very much related note, many of my double and triple boxes have four or more white (neutral) wires inside the box, all bunched together in a single wire nut. Adding three more white wires for these three new smart switches didn't really work with the existing wire nuts, nor did it work with the included wire nuts (which are obviously designed for joining two wires and not seven). Luckily, I had extra oversized wire nuts lying around from previous projects, but, again, that's something you can easily pick up from Home Depot, Ace, Lowes, or wherever, without much hassle. For some of the black (hot) connections, there were already small "jumpers" that the previous electrician had used to wire things together, which made it a little easier to use the supplied wire nuts.Once I got everything installed, setting up the "smart" features was simple, though not as simple as it could have been. First of all, you need a smartphone to set the switches up. I'm assuming for most people that shouldn't be a problem, but it is worth mentioning. My phone had trouble with the QR code not going to the right place to download the required SmartLife software, but I manually typed the name into the Play store and found it with no problem. That could have been out-of-date documentation in the box or it could have been a problem with my phone.When you first power on each switch, the LED on the switch will rapidly flash red to indicate that the switch is ready to be set up. If you don't get it set up in time, no problem, just hold the switch down for five seconds and it will begin to flash again. My problem was that the software kept having errors setting up the switch in this mode. However, there is a second mode (hold the switch down for another five seconds and it will begin to slowly pulse red) in which the switch sets up its own WIFI hotspot that you then connect to on your phone to do the setup. This mode worked like a charm for me. After trying the "fast" mode on the first four switches that I installed to no avail, I didn't even bother on the remaining switches and exclusively used the "slow" mode, which, ironically, was much quicker for me.Once all of the switches are added to the SmartLife software, you could stop there and be 100% happy with your setup. The software is easy/intuitive to use. Switches can be grouped into rooms within the house. You can group the switches for one-tap access, create simple automation, etc. And you can sit on your couch and control the lights in other parts of the house with a touch of a finger to your phone. I wanted to go the extra step of integrating my new switches into my Google Home so that I could control them with my voice, though, so there were a few extra steps.First, when I opened my Google Home app, it already recognized that I had added SmartLife, and prompted me to connect the two. After doing so, it quickly recognized all of the new switches and allowed me to add them to my existing rooms in Google Home. The only thing I think could have been better is if it had recognized that the rooms in SmartLife had the same names as the rooms in Google Home and automatically grouped the lights accordingly. I'm sure there is a use case that I am not thinking of to explain why it doesn't work that way, but that's really my only complaint when it comes to integrating with Google Home, and that could very well be a Google problem rather than a Treatlife problem.I've had the switches installed for about a week now, and things are still working great. I love being able to say "Hey, Google, turn on the living room fan and reading lamp" while I'm still in my bedroom and having everything ready for me when I walk out. I also like that I don't need to walk through my entire house before bed to make sure that all of the lights are out. I can just say "Goodnight" and everything turns off.The switches themselves are attractive, as far as light switches go, and relatively unintrusive. They have a good analog feel to them when pressed. The 3-way switches are "smart" enough to know when a light is on or off even if the other switch in the pair was used to toggle the light. The dimmer switches are press-to-turn-on/off and then touch-and-drag-to-dim, which did take a little getting used to, but I find that I like it a lot more than the separate on/off and up/down buttons on similar smart dimmers. Plus, if I want the lights or fan at 25%, I can just touch my finger at that point on the touch strip and it will jump right there, which you can't do as easily with an up/down button. Of course, I tend to just say "Hey, Google, set the overhead light to 25%" and be done with it.Overall, though, I could not be any more pleased with these smart switches. They are exactly what I was looking for, they work as advertised, and I haven't had a single problem with them since installation (I will update this review if I do). So far, I've smartened up my living room, master bedroom, stairs, and landing (overlooking the living room), and I'm looking forward to putting in my next order.

Smart switch installation went great. No issues. Had problems connecting to phone, but was user error. Before discovering the error I did contact company. Very timely response and several suggestions. Note that this does not work on 5GHz WiFi freq. May need to adjust router settings temporarily during set up.Switch works great using iPhone and iPad. Timer setting work great as well.

Like all the Treatlife switches, these work extremely well and always stay connected to my network. I really like the ability to change the indicator light to “on” when the switch is turned “off”. Handy at night to locate the switch.

Works great does exactly what I wanted or need ed , great product

I don't use Alexa, I purchased to use with the Android app. My initial reason for purchasing was to create schedules to provide an appearance of someone being home while we are travelling. I've also found them useful for turning on interior lights for pets, and porch lights for ourselves when we're delayed getting home. Switch works flawlessly and the installation straightforward if you can do really basic wiring.

The biggest issue I have is the relay noise. It is very disturbing and it happens very often. Other than that installation and setup is pretty easy and quick. I wish the light indicator on switch would be brighter.