AKEPO 16W Car Home RGBW APP+Music Control Fiber Optic Lights Star Ceiling Light Kit, 28key RF Musical Remote with Sound Sensor Light Source and Mixed Fiber Cable 430pcs（0.75+1+1.5mm）9.8ft/3m

My son loves them worked perfectly for his car

The media could not be loaded.  The overall project took about 3 days (18 hours) of work, lookup YouTube videos, BE WARNED, don’t get in over your head with this it is a big project but well worth it. Start by finding a video of how to remove the headliner, generally secured by screws in the visor and clips on the plastic trim and seal of the vehicle, once the headliner is removed use a colored sharpie and divide it into 4 sections, you can do more if it’s a big headliner as I drew 10 sections as I have a big SUV, then divide the sections by how many fiber optics you got, mine was 10 sections, 550 fiber optic cables, so it was 55 cables per section, I also made 10 sections so I knew the lights would be evenly distributed, then mark your sections with a dot or X to know where to make the holes, use a small drill bit (drill is highly recommended as there are a lot of holes to make) or use a tac, drill all the holes then grab your fiber optic cables and start from the back to front feeding the cables into the holes, make sure you have a good spot to put the light box inside of your trim or if it fits in the headliner, feed all excess Clarke’s through the holes to avoid a bunch of slack and bulk to the headliner, once’s all cables are fed through begin hot glueing (USE LOW TEMP HOT GLUE GUN) or an epoxy like E6000 which you can find at your local Walmart, if you use the epoxy which I recommend, don’t be stingy, make sure there’s plenty of glue in each hole where the cable is fed through to avoid them slipping out and you having empty patches. Look Also for epoxy let it set overnight to create a strong bond, hot glue is a fast way to secure the cables but be careful as even low temp guns can melt the cables from the temp, some glues like superglue will also break the cables do to the chemicals, so use E6000 epoxy. Make sure you glued ALL the cables down look over it a few times you’ll find some you missed I promise, Once it’s all prepped to be re installed call up a friend to help, you’ll need it, start by feeding the headliner preferably through the trunk and secure it from the front to back, ensure your cars door seals go back over the headliner so you don’t get a leak, make sure all clips are back in place and test out the lights. begin trimming your excess cables flush with the headliner, use normal sized nail clippers or thin small scissors, then sit back and enjoy the light show (:

The media could not be loaded.

Finally have weather to install and look great but the remote doesn't work. We've tried everything and unable to request a return

Works great and awesome customer service

The media could not be loaded.  The time and patience it takes to install is insane. But if you commit or pay someone it's well worth it. Took me about 12 full hours.

App has a few problems but they looks great

Great project for my son and I but a ton of work. Final product was worth it. Took about 6 hours total.

Perfect

Looks amazing…however, only thing not working is the twinkle mode

This came with a remote that doesnt work and no batteries. I called amazon and they couldnt help, we contacted the company and heard nothing. Pretty disappointing and now I can't even return it as I waited for a reply to fix this issue.I dont recommend this product or the seller

Bon kit

got it, works, just when i did it and put it in my car the lights are not bright but some are, its mixed and i dont know what to do? plug and unplug it or