uxcella14012100ux0387 5 Pcs 32V 30A Mini ATC Blade Fuse Holder Container (Pack of 5)

Received these on 3/16/2016. These are for Mini ATM fuse (not ATC as described.) Red wire is 16 AWG and size is printed on wire. Black boot is a bit hard/stiff, but ribs on black base hold cap in place just fine. Came with five (5) 30 amp mini ATM fuses. I plan to use these with 3 and 5 amp fuses. I'm satisfied with this product and gave 4 stars instead of 5 because seller did not answer my email about the incorrect "Mini ATC" (should be Mini ATM) description.

They work... alil thin on wire guage... my biggest problem is the clip that hold the fuse in actually became loose causing my lights to work on and off... it took a minute to figure out the issue... once it was found it was a super easy fix... i took a small screw driver and push the pins that hold the fuse tight... problem solved.. for now and hopefully for good...

Sold as 30A fuse holders and came with 30A fuses installed. But the wire gauge is too small to actually support 30A. The wire was only 18ga so it would likely cause a fire if actually used for a 30A load. OK for smaller loads, I used one for a 3A relay trigger line, but inaccurate item description made it unusable for the purpose I bought it. Had to purchase additional fuse holder with larger 12ga wire to support the high current circuit I originally intended to use these for.

Cap for weather protection of fuse doesn't fit as tight as if like but it gets the job done. Wire is 14 or 16 guage

Great little tool but the wire is really weak

These are as described. They work well and have a nice tight fit for the fuse. If its not tight its not a good low resistance connection!I use a few of these in my off-grid solar power system.

These are NOT for ATC fuses. They use ATM fuses. Very misleading description made me buy the wrong fuse.

Feels like good quality, wires probably not heavy enough for 30 amps but other wise good, use with smaller fuses and ok