ECOTRIC Fender Flares w/LED Side Maker Compatible with 2007-2018 Jeep JK Wrangler 2/4 Door Model Unlimited Rubicon Unlimited, Pocket-Riveted Style Smooth Matte Black Wheel Flares Cover 4Pcs

So first off, these were installed on a 98 Cherokee classic. The package was shipped quickly and was packaged perfectly. The bolt bags were zip tied to the rubber packaging materials which is a great idea because if the box is damaged in shipping the bolts will likely be lost in transit (I've had this happen previously on other large items). They are by no means designed to fit this vehicle. We did a lot of backyard modifications to make them work. I chose these ones for the JK wrangler because of the angle of the curves on the rear wells. With cut fenders its impossible to bolt on the ones that are marketed for and XJ. We had to slit and bend the driver side and weld it in place to allow for the gas door to still open. We had planned to slit and bend both of the rear flares to make them level and not be sloped as seen in the pictures. The problem with that is that since we have cut fenders and 35" tires, the flares would have to stick down in the wheel-Well and would then rub the tires when flexed. There also wouldn't be enough room to bolt them for stability and they would have to be welded on. The front flares fit amazing except for one spot (where the XJ fender trim is). We used flat steel and clamps to reshape the body metal so the flares could sit flush. The (plastic) body trim had to be cut and trimmed to line up and allow the fender flares to bolt flush. Once installed these are the exact same width as the side mirrors when in driving position. This is perfect for us since we have 35" x 12.5 " tires and we installed these to keep the mud from slinging to the windshield. The only problem is that we slide through narrow trails and sometimes beat the mirrors off the trees. I am expecting to bend these at some point and I will post updated pictures after we bang them off a few trees. Took it out tonight and finally got to test them and the results were great. I can now leave my windows down while banging off the Rev limiter in the mud (forward and reverse). Very happy with the price and quality. (You can laugh at the angle of the rear flares because they look kind of goofy, but that was the best solution for what we needed.)

Easy to install and looks great on my wrangler

the rear bolted up fine. Do not use the self tappers they send, they are junk. I bought a pack of 1 inch stainless steel ones from Lowes for like 5 bucks. this will save you a lot of stress. the Front fenders I found it best to get the center mounted snugly and then push like a mad man to get them to fit the wheel well. its almost like the jig for the welders that made them is worn out and they have been sprung. I was able to mount them myself but a second set of hands would have been nice. the quality isn't the greatest and there are some gaps here and they but they are cheap. If its for a weekend warrior and trail damage and rock rash is a badge of Honor, you will love them. If you have a mall Crawler and want everything perfect buy something else.

I love the quality and price. But no instructions. This its the second product that I bought online made in China but designed in the USA. No instructions doesn’t help. Before I give you medicine in the hospital I give you the written data, risks, and when to take it (instructions). You’d be mad if I didn’t follow through. You’re making something good ugly

Fenders arrived with miss matched light connector. There are 3 lights on front 2 on rear. The front connectors have only 2 connection points where the back has three. Contacted both the company and amazon to help resolve the disparity and both the company and amazon were unwilling/unable to fix what I considered a pretty simple problem with an easy solution. I now have basically a fake amber light on the front fender and an extra connector doing nothing at all in the rear. Wish this were the only issue but unfortunately some fabrication is required to install and the fenders are very low quality. One minor hit and the fenders will definitely be destroyed along with damaging your jeep. I would steer away from this company and purchase a better quality product.

They look "cool" however, they are cheap lol. I'd give this 4 stars if I could justify it but there's some issues. The installation screws are too short, the holes for the lights are too narrow for the lights themselves and the fake metal rivets on top look, well... really really fake lol. Check out the picture. I needed new fenders anyway do to some cracks in mine so this was a quick, and fun alternative to the stock ones. But they are cheap. So if you're an off-road jeeper and want some cheaper options, these are them.

cheap but good some hardware was a little short but simple fix $3 at hardware store for the right length bolts but other then that looks great on 07 wrangler. lights seem good not cheap , very easy to hook up about 2 hours to install really all you need to install is phillips screwdriver and a pair of plyers or 10 mm socket if i remember correctly.went on a mild off road trip with friends and they even look cool covered in mud. hope this helps its my full experience.

They look like a rugged ridge knock offs but honestly they are not a bad option for the price. Overall if you have installed fender flares before then youll get through this fairly easily. They are very similar to the hurricane style flares so if you follow that install it will get you through the bulk of it. Worst case watch some youtube, may or may not of put a video up with a bare basic follow along of how I did it. Look wise I really like em just got to see how they hold yup. FYI all the holes lined up on our 11" jku, no additional hardware needed or drilling.

Great looking, relatively easy to install. There isn’t any instructions so you have to figure out the hardware. Wiring the lights in is a bit of a journey to figure out but not the worst. Mine was tougher as I had non stock fenders on my jeep already.

Got these flares because I bought my Jeep used and they had those cheap steel flares on it which were rusting. Wanted something a little more aggressive looking than OEM. Looks great but light gave out after a month roughly… wired/spliced them into my running lighs. Wasn’t able to contact the company through Amazon so I left it alone. Hardware they came with was junk and did not fit the oem holes correctly (most bolts weren’t long enough) I used rivet nuts and bolts I had in my tool box to make them work. Looks great, not great quality but decent for price if you don’t mind some adjustments and wonky lights