🎶 Elevate Your Ride with BOSS Power!
The BOSS Audio Systems R1600M Monoblock Car Amplifier delivers a powerful 1600W output, featuring Class A/B topology, MOSFET power supply, and adjustable controls for a customizable audio experience. With low/high level inputs and a robust 6-year warranty, it's the perfect addition for any car audio enthusiast.
Material Type | metal, plastic |
Item Dimensions | 12.34 x 10.44 x 2.25 inches |
Number of Channels | 1 |
Minimum Supply Voltage | 1E+1 Volts (DC) |
Mounting Type | Car Mount |
Voltage | 9.66 Volts |
K**V
Riot R1600M
I bought the Riot R1600M about 3 years ago. Still pushing my subs hard, I'm running 3 2ohm 10inch subs with it. Works perfect. Great price for the power. Looks great with the LEDs in the BOSS logo, blue.
A**.
Compact, easy to install, very decent sound quality for the money!
PROS: small footprint, budget friendly, great soundCONS: despite some claims it still requires adequate air flow to remain coolThe application is to power an OEM dual coil 7" subwoofer pulled from another car and placed in the trunk of my daily driver sedan. I'm using and aftermarket head end with line-outs for the subwoofer function. I wasn't looking for anything too big as I needed my trunk space, small as it is but adequately insulated, and I didn't need to heard coming a mile away. Installation was a breeze. I did have to drill mounting holes under the deck but then it came together quickly. All connections are pretty straightforward (if you know, you know). I have the head end set to drive the mid-range door speakers directly (4 of them in standard stereo pairs) with a HPF of 83Hz and max 50W per channel. Lower frequencies makes the door metal panels rattle too much. The sub woofer stereo line outs is set with the LPF function to 120Hz and under. Nominal impedance of the dual coil sub is 2 ohms each wired separately for both of the amp's stereo outputs. The woofer along with amp are all in the trunk with enough insulation to prevent car body rattling. The final sound is better than I expected. Tuning wasn't very hard, a little work for the filter settings but the effort is rewarding and really pays off. You couldn't pay an installer to do better than you like to hear it. Despite some claims of being compact enough for fully enclosed installation, I would not recommend it. This unit can still get hot, especially in the summer time, and it needs ambient airflow for cooling. Would definitely need fans for tight spaces. I never got it hot enough to distort in my trunk but YMMV if you're seeking to put this under the seats or in the console.
K**H
Off to a great start! I am impressed!!! Read on....6 years later now.
Edit 2: read bottom of review.....This is my first real review here on amazon so it may have typos, (I'm on my phone) or not the greatest grammar.I just received my 1600 watt mono riot boss amp earlier today 8-2-2016 and proceeded to hook it up. Its being tested and used on the dual 12 Mtx Terminators and so far so good. Haven't done the fine tuning on it or my head unit yet but I have the gain set 2/5 and they sound great for no tuning. For the sake of my review I will start with my initial impression of the amp and update it after I fine tune them. Then 1 week later, and at last 3-6months later. So, let's start with the unboxing. I purchased the 1600 watt mono riot to power my Mtx dual 12 Terminators at 400rms. I did extensive research on this amp and realize BOSS greatly over exaggerates their watts and rms. So I based it off that the 1100 watt riot that can be bundled with the Mtx Terminators is only pushing around 250-300rms at 2ohms according to many reviews I have read. With that math, the 1600 watt amp should be around 360-450 rms at 2ohms. Which would match my subs perfect. And even if I'm wrong, it should be a decent amp to power them at the least, and was purchased at a great price. I purchased a used like new amp from the Amazon wherehouse and it's brand new except for the boss which has a few minor dings.Now, when I opened the box, I was very impressed tbh. It's heavy but not too heavy, feels of high quality materials and it even looks nice (apparently it glows blue where it says BOSS). The bass knob is kind of cheap looking, but at least it comes with one. It has the manual and a BOSS sticker for your car, high level inputs, 2 extra fuses at 25amps a piece and mounting brackets attached to the amp.I ran it earlier for around an hour at mid level volume and it stayed cool (which doesn't mean it won't overheat after extensive use) but off to a good start. It's also 88 degrees outside where I'm at. So I realize there isn't a whole lot to my review to base a real review off of but my initial impression warrants a 4stars. I will update my review in 1 week with more information on my experience with this amp.Edit: it's now been 5 days and it kicks like a champ. I found the sweet spot on my amp for the subs and it bumps. Ran it for over an hour at 3/4 volume and it only got a little bit hot. Nothing major. I am very impressed and will continue to adjust minor things as I feel I have broke my subs in. I do not use bass knob (it does work) but I feel like i have to put the knob higher up than the amp gain knob to get the same sound. It could be just me but whatever. Let's see how the next couple months go and I'll be back for my final thoughts. Still 4 stars and I highhly recommend this amp for budget builds or people on a budget. Also, it looks so dope at night when the amp lights up blue around the BOSS logo in the back of my jeep.Edit2: So amp still is running a few weeks later and has never overheated like some may say. It all depends on location, what it's powering and how hot it is in your area u live. But I've come to realize it sounds decent. Maybe I have gotten used to the bass but it doesn't kick as hard as I feel they can or others have stated with a different amp..once again I have the boss 1600mono amp class a/b powering 2 12 mtx terminators. I am going to purchase a new rockford Fosgate Amp 500w at 2 ohms and will update my review once I hear how it sounds in a few weeks. I have a feeling it's going to be much better sounding and might take a star off my review. Still a cheap priced amp for a cheap build.Also the price has risen to 77$ on amazon in the past few weeks...I bought it for 53$like new. So be careful.Edit 3: 6 years later it finally went died on me. A couple things I've learned over the years. 1. This amp (1600 watt) is only 500rms at 2ohms. Even then it might be less.2. The price is at 110$ now which is double the price I spent, although 6 years ago.3. It lasted through 3 cars, and multiple installs. Its a great amp for what you get and for a low rms low budget build. Stick to around 400-500rms. But with all ive learned from car audio, Skar is the best proce to performance out there. If you cant get Skar then this will do.
R**.
update
Saw the warning and reviews indicating this unit had some problems...either it worked or it did not. I have limited space as the picture shows. Wired it up, easy, and fired it up. Worked great. Turned it off and had lunch. Came back out and was going to drive the truck, turned on the key and radio and "pop", amp fuse blew. Installed another one and "pop". Checked all the wires and all was good, but amp fuse kept blowing. I can only assume something in the amp was faulty. Due to having all the wiring done and the fit being correct, I will give it one more try. For 90 seconds it sounded great...just what I needed to complete with my exhaust!...Update...Second unit kept cutting out. Boss radio changes modes all be itself. Boss speakers rattle so bad I had to pull them. Customer service was good, product is not. Sorry.
R**F
Buy premium rcas 8 ga speaker wire 12. Throng gro
K the first one I got scared me , it was malfunctioning rca and high power. They sent me another one and it feels heavier , looks darker and sounds amazing. No whining. No distortion I left my set up the same so the amp which I returned today with 2 other things and kept receipt because they are careless at staples, anyway just to make sure it wasn’t me. Yay
A**R
Poor sound quality but good features, good price-point, effective for some applications
This unit uses very poor internal noise filtering so unless you place filters on the line-side inputs, use a good power source and use proper cabling you are very likely to get a low hum anytime the amplifier is on. I'm using the 200w 2-ch unit and it does fine for small speakers. I'm using it to power outdoor speakers on an RV/travel-trailer and they work OK. At this price I wouldn't expect much and you don't get much but it does function and does provide sufficient power for the small speakers that it is powering.
Trustpilot
2 months ago
3 weeks ago