🔧 Drill Your Way to Perfection!
The 3/4 Inch HSS M2 Drill Bit Hole Saw is engineered for professionals, offering precision cutting through a variety of materials including steel and copper. With a remarkable accuracy of <0.1mm and the ability to cut over 100 holes in steel, this durable tool comes complete with essential accessories, all housed in a rugged plastic box for easy transport.
S**
Great quality product.
I’ve been using it for almost two years and still works perfect.
L**E
Worked great
Never saw a metal drill bit like this one, but when we used it. Wow, it was a beast and cut a perfect clean hole thru very thick steel, fast and clean. Did not bind up like the regular bit did. No deburring was necessary either.Great bit.
K**.
Works better than expected!
This thing cuts 10x faster than a small drill bit! Works great on the slow speed (300rpm) as recommended by manufacturer. Be sure to stop & put oil on it along the way. I cut 12 holes in fairly thick angle iron in like 10 minutes with no problem at all.. I did drill pilot holes first a hair smaller than the center bit. I will buy more just to have in my box!
S**R
Excellent quality but not appropriate for thin material
High quality bit but not useful for making washers or cutting shim steel/alluminum. Will just twist material apart even when held in a vice. Would reccomend using only in a drill press at higher speeds and thicker materials which are well secured. Cuts will be sloppy under any other conditions but the bit is extremely durable.
K**N
Works well with hand drill
I drilled 4 holes (17mm) in 1/4" mild steel with a drill press then 4 more with a 12v cordless drill. I oiled each hole repeatedly with 3 in 1 oil while drilling. At the end of the job the bit was still performing well. It's slow going but it seems easier than drilling consecutively larger holes. Drilling the pilot hole first with another similar sized bit seems like the way to go
A**N
Great product
It literally works flawlessly, just don’t be in rush. It should work slow and cut metal accurately.
G**A
Ehh
Not good for metal cutting as i thought it was.
W**E
Does it's job
I'm always hesitant when buying bits etc as you never know these days what coming in the package. I used this for some additions to stainless steel sinks and it has worked flawlessly. It has stayed sharp so I have no complaints.
I**.
Works better than expected but has its limitations
The fact that I've managed to punch 6 holes through 1/2" steel is impressive. The drawback that I'm seeing is the limited depth of the bit (<1/2") which requires finishing the hole from the back side.The pilot bit is also sub-par, but if you pre-drill with a good bit, the hole saw will do it's job well.
D**A
Lot of work
Helped for what i needed it for
M**S
Very sharpe
It cut a 1/8 steel piece thick in a mn
A**J
Works well on stainless steel
I bought this to drill a hole in my stainless steel kitchen sink to install water filter faucet. I had tried a few bits from big box store, but all failed. This worked well on my regular RYOBI drill / screwdriver machine.
K**A
Received fast
Cracked outer case right away
Trustpilot
1 month ago
1 month ago