Sew Ready Foldable Hobby and Cutting Grid Table with Grid Top and Storage Drawers for Arts and Crafts, 58.75" W x 36.5" D Table Size, White

This table is AMAZING! Well worth the price! I really love the cutting grid for my sewing hobbies. I also use this table for my painting hobbies and my diamond art fun. I appreciate that it folds down and is compatible for storing, and how you can put one or both sides up. I love them at the height is adjustable, but it is hard to adjust unless you have a second set of hands to raise or lower it. I would highly recommend this due to the durability and stability. The wheels also lock in place if you do not want it to move while using it.

In three hours today, I unboxed the table components, read the instructions, and assembled the table.I'm really impressed with the easily readable detail in the instructions and the numbering of every part number that also corresponds to the instructions. Instructions are primarily diagrams, with just a little text. A lot of text is not needed. Anyone with little to no ability to assemble something, or anyone who doesn't generally do well following instructions, will find the instructions very easy to follow. I've never seen instructions so well done and easy to follow.As for the table itself, it appears to be very well built. The engineered parts and inserts that the screws and bolts thread into were all perfectly placed and I had no trouble lining up or inserting anything. Everything but the underside of the tabletop had metal components to screw or bolt into. The underside of the tabletop had partially pre-drilled holes to attach the hinges with screws. These screwed into the wood. A few of the holes were only slightly misaligned, but I had no issues firmly attaching the hinges.I really like that the height can be adjusted. To do so, the table would have to be laid on its side so that the knobs can be unscrewed (all metal into metal!) and the legs adjusted. When assembling, I would recommend determining the height you want when first inserting the legs--it'll be easier to do at that time than waiting until the whole table is assembled, since in the early stage you'll only be dealing with a light frame vs. a fully assembled, heavy table. Fortunately, I had the forethought to do that and it made adjusting the legs much easier.The only thing needed for tools that were not provided is a Phillips screwdriver and an Allen key that's slightly larger than the provided one. That Allen key is for the last of the two bolts that go into the bottom of the table, but if you don't have one, finger tightening it will probably be fine since it's just a stopper for the swing-out support leg for the side panel. I would also recommend using a regular/better quality (thicker) open-end wrench, since the one that's provided is very thin and a little harder to position and hold in place.The instructions say to not use power tools. The main tool used for the majority of assembly is the Allen key. I don't even know if there is a power tool for that. I certainly don't have one. But when I did get to screwing in all those 48 screws into the 8 hinges with the Phillips, I manually inserted the screws halfway, and used my low-power screwdriver to screw them most of the rest of the way--I did so gently and slowly so as to not damage the hole since it's wood. It was just too much for me at that point to do all that by hand. I'm a woman in my early 70s with a bad back, so by the end of the 3 hours, I had to either take a long break and finish later or use some power! If you do use a power tool, don't use an impact wrench, since that's likely to cause damage. I screwed them in slowly and gently until nearly completely in, then hand-tightened all the screws the rest of the way.TIP #1: When you've finished installing the hinges on the tabletop and are ready to lift the frame onto the tabletop, do something like I did to make that easier and to keep the side panel support leg from swinging outward. I used velcro strips to strap both side panel legs to each adjacent support leg of the main frame (center frame). You could use anything like cording, strong tape, etc. Just something that will keep the leg in place as you invert the frame onto the tabletop which is bottom-side up on the floor. Then after you attach the tabletop, you'll also be able to turn the unit right side up without the side panels swinging outward and banging into something or damaging the hinges from force of gravity.TIP #2: After completing assembly, I noticed that I had the tabletop panels installed incorrectly. One side is metric and one is imperial. Since I was working upside down, with the printed side down, I didn't realize there were two types of measurements, so now I have metric in the middle of the imperial, and vice versa! And I can't correct it because the hinge screws are inserted into wood, and I don't think I'd get a tight fit if I removed and reinstalled them. So that's one flaw in the instructions--if they would have cautioned about that, I'd have gotten it right. So, watch for that!I've attached a few photos from the instructions, hardware, and frame parts so you can see how they are numbered and how easy it'll be to follow the instructions where each part to be installed is numbered on each page.Shipping ripped out a large chunk at the corner of the exterior cardboard box, but the table was so well packaged that there was no damage. Pic attached.I have lots of plans for this table, and really like how when it's not in use it can be folded so that it takes up very little room. I highly recommend this well designed, engineered, and constructed table!

Super sturdy and easy to put together. I love that the height is customizable and when fully opened has plenty of room for cutting. I highly recommend this product.

I liked the table so much, I bought a second, however, this one had grid lines. Putting it together is easy, may need a second person, becomes heavier as you build and it need to stand up right after it is built on the floor. A LOT of screws to add. Great sewing table and the fold down sides makes it super easy to store away. The adjustable legs are also a perk to lower for working with children or to raise for standing. The only disappointment was the pre-drilled screw holes under the table, did not align to grid lines on top of the table and no matter how hard we tried or how many people we added to project to hold, the lines remained uneven, we could not add new holes because they would have been too close to preexisting. At first, it was an eyesore to see uneven lines but now, with all the fabric on top I do not notice. I would still buy again and recommend, just without grid lines.

This cutting table is well built, good quality, and easy to assemble. The top is solid heavy plastic, not a cheap laminate. Pieces fit together well and the directions are clear. It is very heavy, you may want to open the box and move it in pieces. Be sure to measure the height you want first, then attach the casters to the side legs, measure, and add 1/2" for the top, adjust. I left 5 holes at the bottom of the adjustable bars and this gave me a height of 36.75", perfect for me (I am 5"5" with long legs). You would have to tip the table over on its side to adjust the height after it is put together. I would suggest using an electric screwdriver or other power tool for putting in the 48 screws on the hinges, be careful, they strip easily. Other bolts were easy to attach and tighten with the provided Allen wrench. Be sure the 3 top pieces are aligned properly before attaching the hinges. It took me 2 leisurely hours to put it together, I only needed a little help at the last step when turning it upright. The plastic card holding all the screws and bolts had a typo making it confusing at first to figure out which bolts to use in several cases, but you can figure it out by the number of pieces provided. Two wrenches were provided with 4 different sized openings, only one end was needed, nothing fit the other ends. I had to use my own pliers to tighten the caster nuts. The markings on the table are accurate, I checked with one of my quilting rulers. There would be a slight inaccuracy if measuring across the hinged areas vertically. I found that my hinges did not line up exactly and therefore the lines going across them are not exactly continuous, off by about 1/32". The only negative is that since the support for the leaves is only in the middle, when you press down on the corner area it moves down a little. I would not put anything heavy on it, especially a large sewing machine. I had a cheaper version of this I got at Joann Fab, this one is so much better, although neither one is as sturdy as a four legged table (but those don't fold away as easily of course).

This table is very stable. Nice to only have to open one side if that is all you need. When folded close it tucks away well. If your space is not huge this gives you a lot of flexibility.

The table was easy to put together. I like the grid lines but wished it had the 1/2 inch markings. I’m giving it only 4 stars because my grid lines didn’t match up like some of the others I saw pictures of. This makes it an issue when trying to measure large pieces of fabric.Wondering if anybody has had any issues with their rotary blades dulling quickly? I didn’t buy cheap blades. I even bought some titanium blades & they’re already dulled. I get that you can get dulled blades but I’m on my 3rd one. Could the top be causing this? I can’t think of any other reason why I’ve already had to replace 2 blades & I’ve only cut maybe 2 yards of cotton fabric. I tried to research to see if I’m not suppose to be using a rotary blade directly on the table but couldn’t find anything but if that’s the case I’d of never bought the table. I just changed blades again & decided to put my cutting mat on top of the table to see how long this blade lasts. I do like that it folds up & hardly takes up any space & I like that it has wheels to easily move it around. It’s big enough to easily work on quilt tops.I just changed my rotary blade & I’ll update my review after I see how long this blade lasts by using my cutting mat instead of cutting directly on the table. Is anyone else having this same issue?UPDATE: I’ve had the table about 4 months now. You are NOT to use a rotary blade directly on the table. I do love the table & the fact that it folds up is a bonus. So I’m changing my stars to 5.

I have had this table for over a year. It is perfect for my cutting needs. It's also large enough to spread out a lap quilt. Assembly was very easy and the table folds and tucks away nicely when not in use.

Very useful and good quality

this product is amazing. sturdy as described. functional and durable. use this everyday. can hold a far bit of weight like a 50 meter roll of material. it's honestly the nest table and affordable. thank you

As someone who enjoys sewing as a hobby, I recently got my hands on the Sew Ready 13386 Height Adjustable, Quilting Fabric Cutting Folding Table. This table has been a fantastic addition to my sewing setup, and I'm here to share my experience with it.First off, the quality of this table is impressive. It feels sturdy and well-made, which is essential for any serious sewing or quilting work. When you're cutting fabrics or working on a project, you want a stable surface that won't wobble or feel flimsy, and this table delivers on that front.One of the standout features for me was the ease of assembly. The instructions that came with the table were clear and easy to follow. I didn't have any trouble putting it together, which is always a relief. Nobody likes to wrestle with confusing instructions, especially when you're eager to start using a new piece of equipment.The space-saving design of this table is another huge plus. It's great for hobbyists like me who may not have a dedicated sewing room with lots of space. When folded down, it takes up very little room. This means I can easily store it away when it's not in use, keeping my space tidy and organized.The height adjustability feature is a game changer. It allows me to work comfortably, whether I'm standing or sitting, which is crucial for those long sewing sessions. The table also comes with a sewing board grid and guides, which are incredibly helpful for getting precise cuts and measurements.My mother-in-law actually bought one of these tables first. After seeing hers and hearing her rave about it, I knew I had to get one for myself. And I must say, it's lived up to the hype. It's made my sewing projects so much more enjoyable and efficient.In conclusion, if you're a hobby sewer looking for a reliable, space-efficient, and high-quality fabric cutting table, the Sew Ready 13386 is definitely worth considering. It's enhanced my sewing experience significantly, and I highly recommend it to fellow sewing enthusiasts.

Works wonderfully as a cutting table!

If you sew and have the space it's a must have. Wish I'd had one years ago. Went together without too much difficulty but required two people to assemble, especially when putting upright.