GameMax Kamikaze Pro ARGB PC Gaming Case, MATX, 4 x 120mm Dual-Ring Halo ARGB Fans Included, ARGB Hub, Integrated Fan Controller, Full Tempered Glass Side Panel Included, Water-Cooling Ready | Black

Extremely good value for money, very little expense spared in manufacturing, considering the price point! Though some might take issue with a molex power connector being used for the ARGB fan board. But really thats picking bones!The side panel is a high quality glass, very shiny! Great for the RGB colours if that's your bag. A single layer pair of dust filters cover the top and bottom PSU shroud, whilst the front intake is covered by a double layer of mesh and dust filters. This enables very good airflow whilst the case stays very resistant to the dreaded dust mites!There is ample room for cable management with 1-2 inches of clearance. Even better if like me, you have nothing but a PCI-E, 8-pin CPU and some front panel connectors connected to the board itself - airflow is extremely good as a result of having such "open plan" space within the case... I'm using a 1tb NVME.The fans are excellent little coolers, operating at quite a low RPM on both the high and low switches, the air-passing efficiency is comparable to any full tower case at double the price. Coupled with a Hyper 212 Black CPU cooler and a freshly cleaned, re-pasted RX 580 (8GB), my R5 2600 (@3.8GHZ) and OC'd 580, have not yet passed 55c and 69c under fairly heavy gaming load.Side note - the heat dissipation is also fantastic, once an intensive game/application is closed, my temps will immediately drop by 20c and then very rapidly decline back to idle temps (GPU @22c and CPU @28c).The ARGB switch board is a great and has a wide array of colour modes for the fans, which acts as a great replacer for mATX boards, considering the lack of pwm connecters associated with mATX.The case comes with all the screws and fittings you'd need and expect, they also offer black cable ties too.All in all fantastic bang for buck with very little to criticise at all. If I had to pick any bones at all I'd highlight the molex power connector for the ARGB board and perhaps a lack of fan switch option's, you have high, off and low... But again, it's kind of irrelevant.

The Gamemax Kamikzae Pro is a very good case, prefect for an matx build and has a lot of featues that are just amazing for the price. First off the magnetic dust filters on the top, bottom and front of the case are amazing to keep dust away for your expensive PC parts. It comes with 4 argb fans pre installed and they are wired to the rgb module to controll the colour of the fans with one button on the front of the case. This just awsome for the price as some cases in this price rage may not even come with fans preinstalled. Moving onto the front IO of the case. It features a LED controll button to controll the rgb in the case fans and or anything hooked up to the RGB hub, a pair of USB 2.0 ports and a pair of USB 3.0 ports aswell which is great, headphone and microphone jack, reset switch and a switch to controll the speed of the fans. It alos a PSU shroud so plenty of space the PSU and all unwanted cables. Lots of tie off points making cable management easy, and also a cage for the a hardrive and mounting slots for a SSD. Also enough space at the top of an AIO or liquid cooling loop and pump.The tempered glass side pannel is also cool if you have rgb components to show off, to power the fans it uses a SATA power connecter which is also convenient. Moving onto a couple downsides is that you need to remove the cage to mount a HDD and it only fit mATX motherboard and smaller not ATX or larger. Not a deal breaker for me but should be fine to build a PC in for the first time very consumer friendly.Thanks, Alan

This case has so many features found on many higher priced cases, for the money you will be hard pushed to find a better case that has what this offers.Easy to build in with the cutouts for cables in all the right places, plenty of tie down points on the back, PSU shroud lets you hide cables too. Perfect case for someone who is new to PC builds.Airflow is really good, running decent temps under load and plenty of space for a larger Graphics card, While im waiting for a new GPU im using an old GTX 760 with a three fan cooler and it fits with room to spare. it would also be easy to install a 360mm AIO at the front too.Included are 4 addressable RGB fans, and a Fan controller for 6 fans ( Max for this case), the fan controller is wired to a button on the front IO so the RGB can be changed through different modes or held down to be turned off completely. This is an option company's like corsair charge for, often more than what this case costs ! Two more fans for the top cost me £14 Each. the Controller can also be plugged into a rgb header on a compatible motherboard to sync all lighting effects. There is also space for 2 more rgb devices, eg light strip and RGB gpu bracket.To be properly picky the bad points are:Thumb screws for side panel are not captive.Front panel IO - HD audio is the classic multi coloured messone of the pre installed motherboard stand offs needed tighteningIm pretty sure, for the £54 i paid for this case, I can find it within myself to live with the "bad points"