Yizhet Bike Handlebar Extender, Lightweight Durable Aluminum Alloy Double Bicycle Handlebar Extension Bracket for Holding Motorcycle E-Bike Lamp Speedometer GPS Phone Mount Holder (Aluminum Alloy)

Pretty easy to install and use. The screws are small so use a small vise clamp to hold onto handlebars so you can use both hands. Otherwise excellent quality.

I have purchased this item, but have returned it. It didnt fit my mtb handlebar and it seems like it would break quicly.

This extender gave me room to add a sturdy phone holder. Very light weight, and looks good on the bike

This extender would work better on a mountain or comfort bike with a straight handlebar than on a road bike, because the aluminum tube is a little too long for a 42" or 44" drop handlebars (the extender may get in the way of your fingers when you move between hoods and other two standard positions on a road handlebar). However, if needed, it is easy to cut the tube to length. Installation on 31.8 mm diameter handlebars (which is a standard diameter these days) requires that one uses a thin plastic insert, provided with the extender. Without the insert, the clamp is too loose. With the insert, though, it is hard to get the screw through the hole and into the threaded side of the clamp. The hole of the screw is narrow and long, so it is very directional; if the hole in the upper part and the threaded hole in the bottom part are not well aligned, which unavoidably happens with the insert which kind of opens up the clamp, the screw does not want to go into the thread. The hole should have been oval in shape, or a larger diameter. A metric Allen wrench (if I remember correctly, 2.5 mm) is provided, but both the wrench and the screws are poor quality, metal is soft and hex-shaped opening is easy to damage if you accidentally tighten it a little too much (and there is not much distance between "not enough" and "too much"). The quality of black coating on aluminum tube is poor, it is very easy to scratch off. Well, this can be fixed with a black permanent marker, sort of. I bought two extenders, and one had a scratch from the get-go. I used them to build a keyboard holder for an indoor bike trainer, and I eventually made them work for my purpose, even though I felt on several occasions that I may damage the parts or screws while tightening them, because they are so easy to damage.

I mount several phones and a camera to my handle bar, it couldnt be done with out this unit.its simple and it works, also it doesnt cost much, its made out of aluminumalso, you can make adjustment out in the field if you need to, by the nature of the design

Don’t waste your time/money. Piece of junk. 1. Screws are too short and strip too fast so you can’t turn them 2. The plastic extenders don’t stay in place and do not fit together. 3. The 3 sticky holders aren’t enough as you need four. 4. The little bar is actually too narrow and doesn’t fit property as you need extenders but it still doesn’t work. Don’t buy this junk. It’s actually made in China junk! It took 2 hours to try to make this work on my utility cart for this weekend. See the pictures as I had to add a fosm insert to the outside of the holder so it would work. I’ll use this makeshift handle for weekend then I’m returning the broken stripped screw with the rest of the junk. I do DIY such as change my own floors and electrical so it’s somewhat easy to figure out how to install. The issue is it just doesn’t work and align. Adding update from my weekend 1 time use of the extender. Well both metal holders snapped in half. This item does not work for a utility cart or cart. Can’t see how it would work for anything.

My order arrived on time.The Yizhet Bike Handlebar Extender was shipped in a mailing envelope. And the bar was inside a separate zip lock bag ( that was in the shipping envelope) as were the clamps, shims, and the wrench (needed to tighten the set screws.) The product arrived in new condition/ no issues to report. The clamps also included a few shims to be added if needed for a snug fit on my handlebar. The bar is very lightweight which is my preference. The clamps are made of sturdy plastic-type material. One set of the shims was made of a sturdy plastic material and the other set of shims look to be a rubber type of material. The wrench that was provided with this purchase is a plus. Installation of this bar/clamps was very easy. The bar length is perfect for my needs. I would recommend this/the Yizhet Bike Handlebar Extender to my friends. I am thinking about reordering as Christmas gifts.

I assembled the parts onto my FLX2 Step Through eBike but it would not stay in place. I ended up buying some black elastic tape to wrap the bike's handlebar to make it tighter. Happy with the length of the accessory bar and quality of materials.

Calidad y resistencia promedio

I'm having to file down the inside so the threading lines up.

Il y a assez d’espace entre mon guidon Gravel et la barre pour les mains.

il me sert de double guidon pour mon velo, ma fille est contente

ich hab mittlerweile zwei dieser Erweiterungen hintereinander am Lenker, und damit einen kleinen Lenkergepäckträger für die Handtasche, ist damit immer im Blick, schnell zugänglich und mit einem Expander bombenfest