Quart size reusable caulk tubes

It's a good idea to cut a ring of plastic to use as a tool to get the plunger out. For the smaller size I used a piece of house vac tube. Once cut it can be placed back in and then the plunger can be squeezed out. The result is a mess with all the drywall compound, but it helps get things in the gaps.

These were great for grout if: - Your grout is the right consistency. Laticrete pre-mixed worked better than Mapei pre-mixed. - The lids are securely in place. If not, they can leak with the Mapei. - You’re laying large format tile. We used this on 4x16” subway tiles and 14x16” hexagons. - You like easier clean up. There’s less grout haze and other nasty stuff to deal with because you’re only applying grout where needed. - You have a pair of grippy gloves. These are a must for getting the lid on/off. (I used the shop vac extension tube to push the stopper out the top.)

A nice alternative to traditional grouting, especially for tile with uneven surface, ridges etc. However, given the make up of grout, it can be a challenge. Use cold water for grout mix for rapid sets. Tip size vs thickness of grout, trim accordingly or mix slightly more water. Don't be surprised if its a single use and toss. It is very challenging to recover the insert/ pusher once you are at the end of the tube.

Worked well a couple times then split at the head cap. Ended up replacing with a brand without a removable head.

Good for easy flowing materials, but not good for cement.

Great reusable caulking tubes that can be filled with a variety of materials. I used grout in one of mine to regrout the tile in my bathroom shower. Worked great and was a lot quicker and less messy than using a putty knife or trowel to apply the grout mixture.

I bought these to use for mixing custom colored silicone grout to match my new bathroom grouting. I did the mixing by hand and put it in the tube per instruction and it worked perfectly. Used with a Ryobi electric gun and got nice smooth results. Saved a lot of money going to a pro. Will work well for any caulk or silicone based item. I was not able to wash it because the silicone grout mixture was aggressive but they seem sturdy enough to reuse. Could probably decorate a cake with it if you want.

Yes, it works. I used it to fill the grout for the bathroom tiles which are not smooth tiles. To buy the grout in a caulking gun from HD is around $11 which is a lot. The only thing they should included is something to pop the end cap out from the tube when it's done, it's very hard to get the end cap out.

Good idea, should be a lot cheaper.

This is useful in two ways; for gunk that is not supplied in caulking cartridges such as filler or grouting paste and to get the remains out of a cartridge that has hardened where the nozzle attaches. It is easy to clean unless the material is adhesive in nature and can be used again and again as long as the components are cleaned before storage.

worked great

Need to playaround with what ever you mix and put it. then it flow like a seal tub bough from a store. I am using as grout for tile, need the right texture for the good flow, but once get use to it, the corners are way easier than pad aplly.

Déçu de la longueur des tubes qui on a pennent la moitié de la longueur d'un tubes ordinaire.