A. General: Unassembled modular shelter is fabricated from low maintenance, lightweight corrosive resistant aluminum (factory fabricated). Site assembly required. 1. Dimensions: 5' Width and 10' Length as stated above - with an 88" exterior height and 83" interior ceiling height. 2. Frame Construction: Provide structural framing of 6063-T6 aluminum alloy extrusions. Members shall have a Austin White finish. Additional color options are available for an extra cost. Connections shall be fastened internally to framing systems using mechanical fasteners or MIG welded where necessary. Exposed fasteners on framing system are not acceptable. Standard 7 ¾" ventilation space at bottom of unit. Two front openings. 3. Roof/Ceiling Assembly: Interior ceiling shall be a panel system providing smooth flat interior, constructed from 20 GA pre-finished white steel able to support optional lighting or heat panels. Exterior Roof shall be constructed using galvanized 20 GA, G-60 interlocking pan sections. Sections shall be 3" high, varying width. Roof shall drain into full perimeter gutter system. 4. Windows: Fixed windows are single pane 1/4" minimum clear tempered safety glass, glazed within wall system extrusions and not fastened to exterior wall. Glass sealed with concealed gasket system. 5. Anchoring: Shelter installation requires concrete pad to be 12" minimum larger than shelter in both length and width dimensions. Pad must be level within ½" over length and width of structure. Shelter to be anchored to pad using height adjustable aluminum boot and anchored down using 1/4" X 1 7/8" Hilti Kwik HUZ-EZ screw anchors.
Trustpilot
1 week ago
1 week ago
