Junction Box, Zulkit Project Box IP65 Waterproof Outdoor Box ABS Plastic Electrical Boxes Electronic Enclosure Black 2.48 x 2.28 x 1.38 inch (63 x 58 x 35mm)

I'd take off 1/2 Star since you have to install the gasket and it isn't a continuous gasket, but the box is sturdy for being plastic, has stainless screws, and is offered at a decent price. I will buy more. I'm using one box to mount a buck converter, on/off switch, and 9vdc power jack with a battery converter mounted on top for a Milwaukee Fuel battery. It provides ample, clean power for guitar pedals. The batteries last many gigs before needing a recharge, it's easy to carry a spare battery and it eliminates searching for a 117vac outlet, ground loops and having another power cord on the stage. Use a daisy chain, plug and play, excellent clean power and far less expensive than the regulated, filtered power supplies they try to sell you. FYI, you can do the same with a DeWalt battery adapter, or any other. You'll need this box, the battery adapter (they come with on/off switches and fuses), a buck converter and a DC out jack. Tools; a drill and bits, screws to mount the battery adapter, a soldering iron with solder, and a multi-meter to set the buck converter voltage. Not difficult to do.

Perfect for an enclosure protecting a pair of alternator positive output shunt assemblies for maretron display input. Certainly not Bakelite but decent plastic grade a bit harder than the cheapo stuff . Possibly more brittle but still with good flexibility . Cut , drilled well and the price was extremely right.

it's so functional and great!

Arrived brand new wrapped in plastic, yet both boxes had some scratches on them.. very disappointing. I need the boxes for projects so I am not going to bother returning them. Anyway, I needed a hole in one to route a power cable through and it was easy to drill with a standard drill bit. Good quality screws and fittings as well.

As described- comes complete. Will have to cut rubber gasket when installing. Recommend “tacking the gasket in so it doesn’t come out. Box working for what i intended. (Gasket not important for my project)

I used them as junction/cabling boxes for my outdoor security cams… but I can already think of a bunch of electronics projects I can build using these as cases. Good build quality, looks small enough but can pack a lot inside.

Enclosure purchased: "4.5 x 3.5 x 2.2 inch"I typically make my own enclosures but I wanted to buy one this time. This enclosure is nice, the finish is a mild/moderate gloss, it ~seems~ well-waterproofed (my application won't be submerged), and it came with multiple standoffs built-in.The enclosure I bought (here in January 2023) had 6 standoffs. One in each of the 4 corners, and one centered between two on either short end. I just cut off the middle standoff on one end for my use.The schematic for this enclosure appears to be accurate in measurements (aside from standoffs not matching the photos, but I didn't expect standoffs to match my circuitry in this one anyway).My circuitry didn't match the standoff pattern so I made my own. The enclosure top and bottom thickness is 3.8mm and I was able to drill+"tap" holes for some motherboard standoffs, without drilling through the bottom of the enclosure which I was happy about. I used a drop of JB Weld on each to be sure.I appreciate the thicker bottom and top.My only wish would be covers for the screw heads on the enclosure's top. The bright shiny metal messes with the color flow. But paint or even a Sharpie should help, it's not even worth listing as a con.I'm just getting started with this enclosure but it seems like it'll be exactly what I was looking for.

I used these for a small power distribution system for an 8Ah battery. The box is exactly the same width as one of these batteries. I was able to fit the power-in cables, two rocker switches, and three power out jacks in this project box. Tight fit, but it worked. Very pleased with the quality of the construction of these project boxes. I have the 2.48" x 2.28'' x 1.38'' size (Pack of 2).

Really good value for these quality enclosures

Lo usé para conexiones de acuario

Excelente contenedor para proyectos electrónicos, mis ensambles electrónicos tienen un aspecto profesional

Lots of sizes available and ecomomically priced, good quality

The media could not be loaded.  This project box is credible, however, it has standoffs in the bottom, two of which have threaded female brass inserts to accept machine screws. These are intended for use with a mounting plate so project builders can build components onto the plate outside of the box in the open and then simply screw the base down inside the box when they are done. If the vendor is not going to include the plate, they should at least offer it separately. In my case, I work with plastics and easily made a mounting plate of my own. I made all the cut outs in the box using a rotary cutter (rotozip) and found the ABS body to be much tougher than I expected. Zero issues with cracking despite some of the big holes I put in the box. Everything you see in the photo and video was purchased on Amazon including the ASPL lights, the Talentcell rechargeable battery, the power distribution and accessory unit, even the cable glands. All excellent Amazon products leading to an outstanding outcome. My Rize bicycle has never been the same. When cars approach my bike at night from the rear on lonely country roads they slow right down because they don't even realize it is an electric bicycle. The ASPL (Amazon) strobe emergency lights are so bright they even flash off the trees on both sides of the road.