Syncwire Cell Phone Ring Holder Stand, 360 Degree Rotation Finger Ring Kickstand Polished Metal Phone Grip for Magnetic Car Mount

My wife and I both have these on the backs of our phone cases. They are great to help keep a good grip on the device, prop it up to watch videos, or hang it on a hook. They are the thinnest (depth-wise) rings that we could find that still work well. The double-sided tape they use on these is pretty good, as long as you clean the surface well before sticking. My wife had an Otterbox with a flexible outer shell and over time the tape would no longer stick to the outer shell, so I would superglue it on when that happened. On my hard-backed Spigen case, I never had an issue. She has a hard case Otterbox now and it works great. Over time, the ring will get loose on how it spins and not stay open or in place as well, so we keep extras on hand to replace them when needed. They last quite a while though. Mine lasts a lot longer than my wife's does but she uses hers a lot more too and is not as gentle with it as I am. One other nice thing is that these are metal so they work with magnetic mounts. The biggest drawback is that you can't use wireless charging with these on the back of your device. They are too thick. We have tried a lot of different brands and types of these rings and these work the best for our needs.

Works perfect and stays on for a long time! Had to replace the case before the ring

Very nice well made not to big stuck very strongly but I did leave it for the required 12 hours before use

Summary: Have had this anchored to the same phone case (polycarbonate shell material) for barely over a year now, and overall has been a decent experience. The holder does its job well for the price, however does experience some loosening with use. Design: I found that the design is slim and works well for easy pocket insertion, and the contoured lip of the ring makes opening it with one hand feasible. Comfort is decent, with no sharp points on the ring/base, however do note that the ring is a tad on the thin side if you are planning to use this as an accessibility aid (I personally find it a bit uncomfortable when dealing with autoimmune flares, but generally have little issue). The metallic backing performs great in mounting to magnetic mounts, which has survived several months of car trips while mounted without any unexpected falls. Installation: I highly recommend taking taking a moment to trial and error the placement of the holder before attempting to secure it with the adhesive, in order to find a comfortable/balanced sweet spot for holding/mounting your phone. This is especially important for the more minimalist car magnetic mounts, since the phone will pivot if not balanced or secured with additional rotational support from the mount. Durability: The adhesive backing has maintained a solid connection with the case, and has not slid from its initial placement position. Cosmetically, there is a bit of surface wear on the back plate and ring, however nothing that wouldn't be expected considering the use it endures. After roughly two months of use, the body/ring became fairly loosened, resulting in the ring being less stable and the overall design having a bit of rotational wiggle from the base, both of which progressed slowly in the following months of use. Despite this, the design still worked as intended, however became far more prone to giving out when used as a kickstand for the phone. Today the holder actually unexpectedly separated in two halves, with the outer plate holding the ring coming disconnected from the adhesive base plate. With a bit of trial and error, I did manage to reassemble the halves by firmly pressing them together and rotating in opposite directions in order to lock the internal joint peg/slot. Oddly enough, this seemed to resolve the base plate wiggle that had developed. Despite this, I do have the rating set to 4 stars, since the unit has seen substantial use and had loosened a fair bit beforehand.

Sturdy, stays on all types of cases. Can spin and be used as a stand. Makes me feel more secure while holding my phone. This is my third one. Cases wear out before the ring stand does!

Bought in June, the kickstand screw came loose so I can still use it but it won’t hold its position and flops over, basically broke at 6 months

How did I live this long without this product?! This simple little ring has completely changed the functionality of my new iPhone. I love the new phone, it has a huge screen, it has amazing cameras, and so much more. The main issue is that it's physically huge! It's massive and quite difficult to use with one hand. It's easy to hold but when it comes to typing with your thumb on one hand there's a very real risky feeling that the thing is going to slip from your hand. My wife has one of those pop things on her iPhone X case and she sort of likes it. She likes it because it makes it more secure in her hand but she doesn't like that it's plastic and not really confidence inspiring when holding it. Once she put my much larger phone in her hand and used this ring she said "order me one now". Seriously, it's that good. The back of the ring comes with a 3M adhesive circle and says to wipe clean the phone or case (and it comes with an alcohol pad which is nice) and then peel off the sticky backing and hold for 10 seconds. Well, as you can see from the picture I did more than hold it for 10 seconds. I used a vice grip to hold that sucker on there for a few minutes as tight as I could squeeze that thing. Is that overkill? Maybe, but I wanted to be sure that if this thing ever lost its hold on the phone it wouldn't be for any mistake that I made. I love that this is made of a hard metal and not plastic. As I mentioned before that is one big plus that my wife loved instantly. It really feels solid and sturdy. The ring itself rotates endlessly 360º around the base that sticks to the case allowing you to hold the phone in either hand however best feels comfortable. It's important to note that the ring does not "spin" as in fast. There is some tension behind the ring so you actually have to raise the ring at a 90º angle to the phone and gently rotate the ring gently so as not to rip the dang thing off the phone/case. I don't know if that would happen - I'm not disparaging the 3M sticky - I just don't want to test it and find out. But again, it doesn't just spin around the base like some spinner toy, you actually have to position it where you want it and it stays firm. When the ring folds down it is only very slightly more thick than the extrusion that goes around the camera housing portion of my particular case. Of course all cases very so keep that in mind. I have an extremely minimalist and thin hard case that is more form over function but still keeps the case secure and allowed for a very good adhesive surface for the 3M sticky. When the ring is extended it can be used as a kickstand for the phone itself as you can see from some of the pictures. Of course I had the phone out of the case to take the pictures but rest assured that it functions flawlessly with the phone in the case as well. I installed my ring a little south of center on the phone as that felt more comfortable in my hand to use. Even at this slightly lowered location it functions beautifully as a kick stand for the phone. Seriously, there is truly nothing I don't like about this ring. I hope that the 3M sticky pad holds firm for a long long time because this is the best thing I've bought in a long time. Well, best two thing since my wife demanded I buy her the rose gold version for her phone now too! Just buy this! You won't regret it.

I'm happy with the purchase overall and would reccomend it. I use the ring as a phone stand to watch videos daily and magnet for my car mount. 1)Adhesion - 5/5 very strong and easy to install. Package included alcohol wipe for surface and install was easy. Mine is on the back of a smooth phone case and it shows no signs of coming off. Cheaper alternatives are trash so this is positive. 2) Sturdiness - 5/5 Both the hinge of the ring and circular movement have remained very tight with no change in the resistance since purchase. It supports my phones weight easily with any configuration. Not the case for my last cheap ring that only supported the phone in a very specific config and wore out in about a month.. It would work for the heaviest of heavy phones. 3) Magnet Strength - 4/5 my phone has not fallen off the vent mount, but this magnet does allow the phone to shift/turn a bit on bumpy roads and I have to be careful to center it on the mount. There is a balance to this, as my last stick on magnet was too strong and far to difficult to remove from the mount. This magnet just misses the mark and needs to be a bit stronger. I may buy a stick on mounts to cover it up, but haven't felt the need because it does the job, just not 5/5. Because I watch a lot of videos on my phone in various areas of my house I've went through a lot of rings like this one. None have compared in terms of quality and Adhesion. I highly reccomend it. While the magnet could be slighty stronger, it won't put your phone at risk of falling off a mount.