24Pcs 51mm Metal Alligator Clip Spring Clamps test line Crocodile Clip Silver Tone Alligator Clips Nickel Plated Crocodile Clamps, used in laboratory electric testing work and Cable Lead Clip

These alligator clips are a pretty decent value for the price, and I purchased them for my own use. The jaw alignment of all 25 clips I received is pretty good. The round barrel fits snugly over the metal part of a standard banana plug, so these clips make handy adapters for test leads. Of course, be aware of safety and use any test leads with exposed metal carefully.The construction of the clips is OK, spring tension is decent and the plating is good. I would rate these clips not quite as nice as what I consider my gold standard for alligator clips, the Mueller BU-60 series. These clips are more affordable, and they would be a good choice for student labs and the like where clips are essentially an expendable commodity.

I've purchased these twice, and both times they have been much better quality than previous alligator clips I've bought at similar prices. They're sturdier and better aligned, with only one having an obviously misaligned jaw, and one more having a slightly misaligned jaw. 22/24 are perfect. The 2 with misalignments are too slight to see in the first photo because they're at the left edge and the camera is viewing them at a slight angle.They stand up well to soldering too. I don't have a crimper, and I'm not even sure what type of crimper to buy for these. I've soldered them every time, typically with my soldering iron set to ~750F/400C or higher as I use lead free .993 Sn .007 Cu solder, and I've yet to see a single one of them discolor. The thickest wire I've used them with was 10 awg. It fit easily, but I'm not sure it fit easily enough that I'd be confident that 8 awg wire would fit. I'd probably want some beefier alligator clips if I wanted to use 8 awg wire though.

These are much sturdier than I thought they were going to be. I have a habit of losing these kind of clips everywhere and I wanted a stock pile so I didn't have to go searching around every time I needed one, and these are perfect. I would buy again.

I have an off-grid home with two solar regenerated battery systems, one is lead acid, the other is lithium. There are times when it is incumbent upon me to switch my lighting or other systems from one to the other.These clips have great purchase allowing for a surprising amount of amperage flow.A+.

Made some nice test cables w/ these alligator clips. They soldiered well. They have small holes in the back side of the clip where the soldering will take place so you can stick the soldering wire through the back side and melt it on the front side so that the solder goes down onto the wire (assuming you are holding the clip teeth-up when you soldier). Well designed for soldering and maybe even crimping, but I did not try that.

Take your pieces, chomp down and attach to bamboo grill stick and you're set. These are great value, very sturdy and will last through multiple paint attacks!

I bought these because I am on a Formula SAE team at the University of New Mexico. We needed some alligator clips so we wouldn’t have to keep soldering/splicing our prototyping equipment. Work exactly as intended with power supplies, etc.

I have had this item a week, I don't know how they will work ovr the long run. But they seem ok now

Bonne qualité

Excellent

tutto ok

Yep that is just what i wanted .Good looking clips should come in handy.

Clips are well machined, no problems