🔗 Connect with Confidence!
The QSFPTEK 1000BASE-T RJ45 Copper SFP Transceiver is a high-performance module designed for seamless integration with various switches and routers. It supports data rates of up to 1000Mbps over Category 5e copper wire, with a maximum distance of 100 meters. Featuring a low power dissipation of less than 2.5W and a wide operating temperature range, this transceiver is built for efficiency and reliability. Its plug-and-play design ensures easy installation, making it an ideal choice for professionals seeking dependable network solutions.
| Contact Material | Copper |
| Material | Metal, Copper |
| Number of Positions | 1 |
| Control Method | Touch |
| Connectivity Protocol | ZigBee |
| Wattage | 2.5 watts |
| Upper Temperature Rating | 7E+1 Degrees Celsius |
| Controller Type | Ring |
| Connector Types | rj45-1, rj 45 |
| Switch Type | Temperature Switch |
| Terminal | RJ-45 |
| Circuit Type | parallel |
| Operation Mode | ON-OFF |
| Contact Type | Normally Open |
| Colour | For Cisco-1 Pack |
| Unit Count | 1 count |
| Number of Items | 1 |
| Item Dimensions | 10 x 4.5 x 2.5 centimetres |
K**R
Affordable. Works just fine.
Not expensive and give good throughput at 10 gigabit speeds.
D**E
great for the use
10G perfect
A**U
Work well with Zyxel XGS1210-12
Use it to make a 10gbe connection with the Zyxel XGS1210-12 to my Mac Studio, which natively has the 10gbe Ethernet port. Just plug it in, and it works like a charm.
T**9
Works well but gets hot
I'd read a lot about how hot these transceivers can get, but was surprised at how quickly it heated up. I am using this to connect RJ45 into a QNAP which only has SFP+ ports. Works fine for speed and I've not had any stability issues, but I'm also not transferring loads of data so the heat was surprising. But considering what this is doing at an electronics level, it's understandable. I'll be researching options or ideas to try find cooler options or might just direct a fan to actively cool it.
M**T
These perform exactly to spec
I've run these SFP+ modules at 10Gb, 2.5Gb and 1Gb in both the SFP+ and SFP28 ports of a Mikrotik 2216 router and they have performed as well as they should do. They also don't trigger the temperature warning like the Mikrotik branded SFP+ modules so no annoying fan noise.I've also had them in RB2004-12s+ router, Mikrotik CSS & CRS, Vimin branded switch and they've worked in all of them. All in all, I'd recommend.
A**S
Works perfectly
Working just fine in a Cisco 3850, Proliant DL380 10GB FLOM.No issues at all, works out of the box. And so much cheaper than Cisco SFPs
C**B
Works well
This product came well packaged without any annoying blister packaging. I used it with my unifi dream machine and it worked without any hassle at all. I am having no issues getting the advertised gigabit speeds and i'm happy with the product.
B**Y
Suitable for HP switches excluding Aruba
Had to send back! worked on Aruba but not supported. Apart from that was a good product!
M**P
Fungerar på 10G/1G
Fungerar enbbart som 10G SFP men tar både 10G och 1G på kopparsidan RJ45Passar i flera stora fabrikat, och även i Microtik prylar.
M**L
SFP+ RJ45 QNAP Switch
Der GBIC funktioniert einwandfrei und wurde vom QNAP Switch sofort erkannt. Die Verbindungsgeschwindigkeit beträgt 10.000 MBit (10Gbit).Alles Bestens!
R**B
Excellent
Très bonne qualité, ne chauffe quasiment pas, performance au top (notamment en 10 Gbps). Et effectivement, c'est compatible avec plusieurs vitesses. J'ai testé 100, 1000, et 10000 Mbps. J'en ai environ 8 exemplaires ; je recommande.
M**N
Funziona perfettamente e ha un prezzo interessante.
Installato e funziona!
M**W
Ideal para los uplinks entre switches.
Si tus switchees disponen de sfp+ que soporte 10Gbps este acccesorio es indispensable para conectar entre sí estos dispositivos cuando tienes que escalar una red. (ampliar)
Trustpilot
2 weeks ago
1 month ago