LISCIO Crystal Cream Straighteners & Neutralizer - Strong

This product worked great!! My pics shows before and after my hair was done at the salon.. If you follow the directions step by step exactly as your supposed to the process will work out fine.. I am a Black American woman and I give you my word that it certainly works!! I have also posted other products that I used that I believe helped with the straightening process.. The efficace oil protects the Scalp from burning and the cream in the lavender package protects the Hair from over processing, in my opinion you need both.. I used it right away and don't plan on keeping any old solution.. I let the liscio normal solution, with just a tiny bit of strong solution mixed together, sit on my hair no longer than 15 minutes.. You must move quicky.. My hair type is 4a.. I have a good grade of hair, not too kinky.. If you have fine hair or a really good grade of hair I would go with the mild solution.. If you have really kinky hair I would go with the strong solution.. Well I hope this helps and that liscio works out as well for you as it did for me.. By the way this is my second Japanese straightener.. The first Japanese straightener that I used was Bio Ionic Retex however I like Liscio much better!! Here is the step by step systematic method that I used.. (1.) I shampooed & conditioned my hair with Carol's Daughter Mirabelle Plum Sulfate-Free Shampoo and Conditioner.. You do Not have to use Milbon or Liscio shampoo and conditioner although they may be more compatible to use with hair that has been straightened via the Japanes thermal straightening process however I did not use their shampoo and conditioner and my hair came out just fine.. (2.) I then dried my hair about 80% dry. (3.) I then applied the efficace oil to my scalp to protect from any over processing to my scalp.. (4.) I generously applied the MILBON LISCIO KNOTEUR ZERO 2-in-1 Treatment and Protection Cream to the strands of my hair.. It's important not to skip this step prevents over processing of the hair.. (5.) I placed the liscio normal straightener with a tiny bit of liscio strong straightener into a small bowl and mixed the two together then applied it to my hair with speed.. It's important to move fast durning this step.. I applied it all over my hair.. If this is a touch up then only apply to the roots.. (6.) I thoroughly rinsed hair for about 7-10 minutes this step is important also as insufficient rinsing can lead to breakage.. Do not shampoo again.. Towel dry or lightly blow dry without touching your scalp.. (7.) Section off your hair into 4 or more sections.. (8.) Plug up the flat irons. Turn temperature to about 350 while you apply the MILBON STRAIGHT LISCIO HEAT PROTECTION SPRAY It blocks excessive heat. (9.) Next flat iron hair in small sections, giving most of the attention to the roots, the higher you turn up the temperature the better it straightens however to be on the safe side I kept my flat irons on 350 never surpassesing 375 I went over sub sectioned part about 2 or 3x's sectioover if your hair is previously processed hair I wouldn't go over it more than 1-2x's. Make sure your hair looks silky straight from root to ends. (10.) I applied the neutralizer from roots to ends to lock in the silky straight look. Gently work it through your hair, ensuring even coverage. Note that it's ok if the neutralizer touches the scalp & roots, as it will NOT cause breakage. (11.) Leave neutralizer on for about 7-10 minutes. (12.) Gently rinse out the neutralizer for about 7-10 minutes.. Insufficient rinsing (less than 7 minutes) can lead to breakage.. Do not shampoo, only condition your hair, again I used my own conditioner you do not have to used milbon's conditioner.. (13.) I used the Liscio heat protectant again then blow dryer my hair softly to about 95% dry with a blow dryer comb being very careful not to scrape my scalp with the comb.. (14.) Flat iron again. If you want waves, you can use a waving or curling iron after the flat iron. Wait 48-72 hours before your let your hair get wet, the longer you wait the better.. the hair needs time to oxidize and lock in the pattern of straight or wavy hair.. I only survived 48 hours before getting my hair wet and it still turned out really well.. (15.) This is not a requirement but I added 2 to 3 pumps of the Milbon Straight Lisciocrystal Hair Treatment not much is needed but it allows manageability, gloss and a smooth finish.. Yay.. Your done.. Now the process is complete..

The Brow Art delivered the Liscio items quickly, which were brand new and packaged nicely to survive shipping. Liscio products are the BEST but you have to know what you are doing before using them. This is for experienced DIY'ers and professionals, and it is best to do a patch test first. For those DIY'ers that are curious about how I used them, here's what I did- 1. I shampooed & conditioned my hair with PPT Do from Milbon (Milbon owns Liscio and designs products that are compatible to use with hair that has been straightened via the Japanes thermal straightening process. 2. I dried hair about 90% dry. 3. I generously applied the Liscio root softener to my roots (do NOT skip this step as the straightener should NOT be applied to roots or you risk breakage or the dreaded 'bends'. But if softener touches scalp it is ok and will NOT cause breakage). 4. Applied the Hair Protection Cream to previously processed hair (it protects previously processd hair by slowing down action of straightener by 30, 50 or 90%). 5. Applied straightener to new growth only (again, not too close to roots or scalp, which can cause breakage. Again, generously applying the root softener will prevent breakage) and processed for allotted time (go to the Milbon site and look at their newsletters for advice on how to tell if hair has been processed sufficiently). 6. I thoroughly rinsed hair for about 10 minutes (insufficient rinsing can lead to breakage). Note that I did NOT shampoo. Then I dried it again. 7. Next I used a Liscio heat protectant then flat ironed my hair in small sections, giving most of the attention to the roots, passing a 410 degree iron over the roots about 4x times, and the previously processed hair 1-2x. Make sure your hair looks silky straight from root to ends. If you want a little wave, you can use a waving or curling iron after the flat iron. 8. I applied the neutralizer from roots to ends to lock in the silky straight look. Gently work it through your hair, ensuring even coverage. Note that it's ok if the neutralizer touches the scalp & roots, as it will NOT cause breakage. 9. I left in neutralizer for about 10 minutes. 10. Then I gently rinsed for about 10 minutes (again insufficient rinsing can lead to breakage). I did NOT shampoo, I just conditioned with PPT Do. 11. I used a Liscio heat protectant then blow dried, flat ironed and curled again. I did not let it get wet for 48 hours, as the hair needs time to oxidize and lock in the pattern of silky straight or silky wavy hair. FYI, I have used this process several times and have NOT had any breakage. My 3c hair is now silky, wavy, frizz free and growing fast. The only caveat is if you are new to this process, find youtube videos, the Instructables.com instructions AND read the Milbon newsletters before attempting this.

I have thick curly strong hair, maintaining my hair becomes a hassle, this thing straightened my hair and made it super soft and i am in love, all the curls are gone, and my hair doesn’t get frizzy if I decided to straighten it. I started the timer when I started applying the product from the first bottle and rinsed my hair at 32 minutes in ( again, my hair is thick and super curly therefore my hair needs more time than others) . Then blowed dryed my hair and straighten in with the iron straightener then applied the product from the second bottle and left it on my hair for 5 mins then rinsed my hair. I straightened it again and left it for 3 days without water touching it then washed it. When applying the first product you will need a helping hand if you have thick hair, because timing is really important and you don’t want your hair to fall off when leaving the product on you for too long. Don’t only read off of my comment, do your research and see different people with different types of hair applying the product and judge for your self, my review here is as an overview for people getting the product for the first time and want to get an over view, again, different types of hair need different time frames. There are 3 versions of this product, a strong one, which is this one I got, a mild one which is less intense, and the last one is the weakest ( I forgot what’s it called) but apparently i have heard it’s for the damaged hair( double check i am not sure make your research). Hope this helps in any way

Esta crema alisadora de la marca Liscio Crystal es excelente tiene muy buena calidad, te deja el cabello liso y con una suavidad increíble la recomiendo

More than half of my hair was BURNED off, do NOT buy this to straighten your hair. Go for something more mild or even just embrace your natural hair instead whatever mess this brought me and my mom too. This product is very misleading which caused for more than half of my mother’s hair to fall out. She already had hair thinning but this promised natural Lucious straightening. After leaving it on for the intended time it says on the packaging, she followed all the steps and her hair started falling out in HUGE CHUNKS. This said if your hair was thin or weak to leave it in for 15 minutes, thank GOD I left it in for 7 or else all her hair would have fell. I demand a refund since it caused a huge mess and meltdown in the entire family since we’re going on vacation and now we have to deal with bad hair day. This product is misleading, damaging, and traumatic. Words cannot fathom how angry I am.

I got better results than my last salon visit. Because of COVID, I had no choice but to give this a go myself. I have always had it done by professionals who charged $$$. I have been doing this for about 5 years so I had a lot of prior knowledge of how professionals apply it and know when the hair is ready (take a single strand between your fingers and pull on it gently. If it has a 'springy' type texture, the hair is ready to be rinsed and have heat applied to activate the chemical process). If you have one area that is particularly stubborn in terms of wave or curl, apply the relaxer there first so it stays on longer. You want to make sure you apply the areas that are more fragile last so the relaxer won't damage the hair. Keeping those two tips in mind will give more chances of a successful outcome. I was happy enough that I think I'm going to keep doing it on my own. It saves a lot of money and I get better results without the hassle of spending all day at the salon.

Product is very strong and it burned off my hair. I should’ve bought a lesser strength so I really don’t know if it works or not because I burned off my hair.

I was worried about Japanese straightening my own hair, but it came out OK. The hair in the front of my head is stick straight and the back is a bit frizzy. It is still an improvement over my hair condition prior to the treatment Edit 9/2025: This is still working out well. My hair looks great. I have straightened my hair several times with this product. However, the grow out period can be difficult because you have to have at least an inch of new hair before straightening the new hair, and the difference between the textures can be annoying. I would still recommend this product, and I will continue to use. The hairstylist recently confirmed no damage to my hair at all despite several uses of this product.

It totally works. I tried to use this product on my hair myself at home.... omg I couldn’t believe how it is amazing. every 3months I used to spend $300 for straightening I definitely save money a lot and worth it.

Amazing product, exact results wanted, very simple and "straight" forward

Good product but quite expensive and it is hard to do it at home.

Excellent product great quality works as it should

good product