Rubber Edge Trim Fits Edge 0.12"-0.33" Black U Channel - Length 5 Feet (1.55 Meter)

I used product to protect the edging of a homemade outside glass top drink table. It worked very well especially at corners since I was able to cut 45° and wrap around there corners. The remaining corner I cut carefully to protect it. The glass was about 1/4" thick so I research a lot to pick this product which was more expensive than most but worth it.I chose black as contrast and I believe clear would show dirt if/when it got under edging. Very durable but not how long product will last with constant Sun/UV effect.

Perfect fit. Easy to trim and install.

Flexible and seems to adhere well too. Will buy more if I need it.

The product was just as I hoped it would be, the material was very flexible, I used it to edge around the top of a metal box. I used a silicone adhesive inside of the groove to keep it in place. the exterior of the material feels a little sticky to the touch. it wrapped along the top edge of the metal box and had no issues turning at the 45 degree corners, easy to work with and used a pair of scissors to trim it at the 90 degree corners.

Perfect for our application. We needed to cover the inner edge of a 16 inch diameter hole that we cut for some fans in some plastic paneling. The plastic paneling is 1/4 inch thick. This particular edge trim had more than enough flexibility in it to make the bend around the circle. It installed as if it was made for this application.

It makes for a great edge trim but it is not much of a seal. It isn't thick enough on the sides to work as a seal. I returned it. I would be nice if you could get a sample of a few inches before buying feet of any of these 'seals'.

I bought this to use around the top and bottom of my propane tank so it sits quietly during travel and the metal doesn’t scratch things. It work’s excellent for my application and we used some of the extra on our lawnmower hood sot it would close softly.

you will need some sort of adhesive to make it stay.