for Pioneer AUX Audio Input 3.5 mm Cable MP3 iPod CD-RB10 CD-RB20 IB100 IP-Bus 12-Pin

This chord does exactly what it says it will, plug it into the blue AUX port on the back of your Pioneer receiver (in my case pioneer mosfet eeq 50wx4) then plug the other end into the headphone jack of your ipod, mp3 player. Three Notes: 1.) to enable AUX you turn off your receiver by holding "source" then hold "function" button until your time settings are enabled, keep pushing "function" until you get to AUX which will be OFF, press the up arrow to turn it ON and push "Source" Now you can hit "Source"until AUX shows up as an option. Note 2.) Use the SLA setting under "Audio" button to turn the volume for AUX all the way up as it is typically a weak single from the ipod/mp3 and needs a little boost. Note 3.) initially I used my hand to push the plug in as tight as I could and got no response so after reading some more on the net, I realized that the cable must be pushed in very hard and all the way so I used a small hammer to tap it in tight and it now works perfect!

Before I had this, I could only listen to music on DVDs, but after buying this cable and plugging the IP-Bus end into the hide-away unit, I can listen to music from my phone. You should keep in mind that the cable is not too long, and that it connects to the hideaway unit. If your hideaway unit is in the trunk this cable will not be long enough. Mine is under the passenger seat so it fits well in my car, which isn't super spacious. The cable has worked perfectly so far.

I originally noted that "the plugs fit, but the stereo would NOT play the music from a satellite receiver. Seemed like the solution to my problem, but it just won't work. I was attempting to play an XM satellite receiver through the stereo." I was WAY WRONG... the Pioneer stereo we have needed to have the Aux input turned on. It was a pain finding the correct procedure but I finally found it, turned on the Aux function and it still didn't work. I did extensive online searching and found one guy that noted to ensure the blue plug was fully inserted in the stereo. As a long shot, I decided to pull the dash out, check the back of the stereo and sure enough the plug was loose. As soon as I inserted the plug fully I clearly heard Jimmy Buffet on Radio Margaritaville. So, if you get this cord, make sure you push the blue plug in fully. I think I actually felt a "click".

Works great! Easy to install on my pioneer radio. The price was good and delivery was quick.

i have a "older" high end pioneer deck that lack the ipod functionality. i looked aimlessly for how to connect an ipod or other external device to my deck, all solutions pointing to the stupid CB-100 I and II ipod boxes which are 1) discontinued and 2) hard to source with all the necessary wiring etc. i stumbled upon this glorious cable, and said "what the hell its only 8$." paid the 8$, cable arrived...plugged into the blue aux port in the back of my deck...enabled the aux input through my deck and now i have ipod / mp3 / telephone that can act as music sources when the inserted CD becomes stale. super happy with the product and it saved me a costly 200-300$ in sourcing out that CB-100 I or II box with out the hassle of wiring in additional components. Car = s2000 deck = pioneer 800PRS

I wanted to play audios from my iPhone through my Pioneer head unit and found this cable. It works great! Just plug it into the back of your head unit and run the cable out wherever it is convenient for you to plug in your iPhone, or any other device with a headphone jack. You have to go into the menu of your head unit and enable the Aux option. Then you just cycle through CD, Tuner, and Aux to select your input method. Awesome!

The whole IP bus wire when dealing with Pioneer is a nightmare. If you’re looking for a short review, both this wire and my Pioneer DEH-P3800MP are going in the trash. First issue is getting the IP bus wire to recognize and be enabled. For each head unit, the process is different. After searching for the solution to enable mine, the directions didn’t work. Through about an hour of pressing buttons and making sure the wire was pressed all the way in, I finally figured the correct sequence to enable it and I was happy. I went to plug in my phone and the connection was too big to plug in with my case on. This is the only aux cable that I’ve ever had this issue with. It wasn’t a deal breaker as I planned to buy another aux cable to keep attached to this so it wouldn’t wear out the connection from constant plugging and unplugging. The final straw came when I put my entire dashboard back together and turned my car back on. Guess what wasn’t enabled. Retrying the same sequence that worked before didn’t work. I don’t know if the wire isn’t seated right or it’s the head unit, but I’ve spent way too much time trying to get a stupid aux port on a radio that even the cheapest off brand has now. If you are considering buying the IP bus cable, do yourself a favor and put that money toward a cheap replacement head unit and save yourself the trouble. Mine will be in the trash today.

FIND THE USER MANUAL FOR YOUR HEAD UNIT!! There is a sequence of buttons to push to enable AUX input through the IP BUS. It works perfectly and as expected. Treat the cable with care, it may break inside. Feels kinda cheap. Mine only works if you keep the cable extremely bent in one direction right under the 3.5mm jack male input. Use an extender, just in case!

El producto cumple a la perfección su función y además con muy buena calidad. Lo recomiendo sin ninguna duda. OJO! Hay que activar el puerto AUX en el menú de configuración.

Ich habe ein schon betagtes Pioneer DEH-77mp. Das Radio hat keinen USB oder AUX-In ab Werk. Mit diesem Kabel kann ich endlich externe Quellen an mein geliebtes Autoradio hängen. Als (sehr teure) Alternative kann man über den IP-Bus einen Wechsler, ein Bluetooth-Modul oder ein USB-Modul anklemmen. Beim Wechsler muss man Kabel verlegen, bei BT und USB muss das Modul irgendwo verstaut werden. Nix für mich. Aber nun zum Produkt. Das Kabel ist sehr gut verarbeitet, passgenau, gut abgeschirmt und wirkt robust. Kein Knacken, keine Störungen. Klare Kaufempfehlung für alle Besitzer eines Pioneer Autoradios mit IP-Bus.

2007年モデルAVIC-HRZ008をBluetooth対応にすべく、本品と下記２製品を調達しました。 AUKEY Bluetooth レシーバー 車載用 3.5mm Bluetooth オーディオレシーバー BR-C8（ブラック） エスエスエーサービス [ 3.5mmステレオミニ 中継コネクタ ] (メス) - (メス) ST35-ST35FF 電源供給は低背ヒューズのヒューズボックスからとるため、下記製品を使用し、10Aのオーディオヒューズから供給しました。 エーモン フリータイプヒューズ電源(低背) 2837 配線用の工具 エーモン 配線ガイド(フレックスタイプ) 全長約1m 1161 があると非常にスムーズに実施できました。 これらの投資で、完全に隠蔽された配線で型遅れのカーナビをBluetooth対応とすることが出来ました。 商品としては自作可能なところではありますが、品質も特に問題なく購入価格(1280円 2016年12月)は妥当なものだとおもいます。

I ordered this item because I wanted to be able to connect a smartphone or MP3 player to my head unit in my car. After having connected the cable and followed the instructions from Pioneer in regards to enabling AUX on the head unit everything is working perfectly. I can only recommend this item if you have a supported head unit in your car and wants to add the possibility to play music/audio from an MP3 player or smartphone via 3.5 mm jack plug.

Had the products at a fair price and they were available for purchase.