Lepro 12V LED Strip Light, Flexible, SMD 2835, 16.4ft Tape Light for Home, Kitchen, Party, Christmas and More, Non-Waterproof, Warm White(Not Include Power Adapter)

These are great especially considering the price! For a sub $10 product, the first time I ordered these in 2016 I was worried about the quality and how long they would last. I’ve now used them in two different houses I’ve lived in and they have been great, the only issues I’ve had with them have been related to the driver I was using which turned out to be faulty, and a faulty solder joint that was my own fault. I installed these the first time in a house as under cabinet lights in the kitchen. They lasted for two years until we moved out and I’m sure they would have continued to last if we had continued living there. (And I had them on almost 24/7) I have now installed them in another house, again as under cabinet lights and they have been great. My favorite thing about these is the brightness and color temperature. I don’t like a lot of under cabinet lights / led white lights because in my opinion they tend to be too cool (I absolutely HATE daylight white lights, they make everything look like a hospital room and I don’t understand why people like them...) these lights are a nice, soft, warm white, they look great and provide fantastic visibility for cooking, and create a nice evening ambiance at home. I recommend also buying a remote control adapter device to install with these lights as this will give you the ability to adjust the brightness of the lights and then them on/off without unplugging them. Shown in the photo, they are dimmed, they do get much brighter if you want them to. If you’re looking for quality light strips, no need to buy a more expensive brand, these get the job done, look nice, and for under $10 what more could you want?

"Wow, Heck yeah!" - The first words out of my mouth after turning them on. I was just stopping by to pick up more and decided to leave a review. These have become my go-to white LED strip. I originally bought these to illuminate my 3D printer enclosure; they are so nice, it wasn't long before all my machines got them. Its convenient that being a 12V strip, they can wire directly to the power supply of my 12v machines. Otherwise I just run them on 1-2A 12V wall warts from the thrift shop. I've found so many convenient uses for these that I am picking up another spool just to have on-hand. I obviously really like these, but if I had to complain about something it would be that the adhesive is not uniformly laminated to the strip. The adhesive itself is great, but there are many spots where the strip bunches up and the adhesive forms a bridge/gap (see pictures). No biggie though, i just make sure to run a razor across those before peeling the adhesive liner off. This allows the strip to lay flat against the application surface. Great light and great deal for the price!

Good quality. Brightness is good. Remote control works good but is easily lost. We usually connect them to a wall switch. Very versatile product. Can be used under wall cabinets, and under toe kicks

I bought this because our house has cathedral ceilings in both the living area and in one of the bedroom suites we've repurposed as a home office -- and both have wall dividers that I suppose were intended as decoration and pot-shelves. (We're leaving them bare because dusting up there is a pain.) Nevertheless, the top-side of these room dividers is perfect for LED strip installation to serve as energy efficient indirect lighting. Just lay the strips along the top of the divider and it reflects back down from the ceiling and off nearby supporting walls. Anyway, these rolls are very inexpensive (eight bucks for 5 meters currently) and dead easy to install. I'd say that if you have particular fitting needs, you might need extra connectors and splicers. For us, for the kitchen / living room divider, it has a 90-degree bend between one segment and the other, so for that I'm going to cut the strip and put a 90-degree connector in there for the corner. Recommended additional items: Be sure to get a 12v power supply, and I also recommend a dimmer. Depending on how close power is positioned, you may also need 12v extension cables and/or splitters. There are simple dimmers that go between the power supply and the strip. I'm also trying one of the RF ones with a remote and it works pretty well with another bright blue LED strip I put in the home office area (there, a dimmer is a must, because at full brightness, the blue hurts the eyes). Even though there is a detectable amount of green in the 'warm white' (hence the one star deduction), it's not bad and does a nice job of providing extra illumination for not that many watts burned. We're already looking at several other locations in our house that could benefit from these LED strips.

It was not easy to choose from the myriad LED stripes on the internet, but this one proved to be a really great one. I ordered 5m in October and now 2x5m in January. I use them as display lights on IKEA shelves, the remote is not in use, but worked when I tried at the beginning. The brightness level is just fine for not giving too sharp contrast to the products or unnecessary shine and flickering. I cut it and soldered where I needed a brake in the stripe. The overall quality of the product, the packaging and the manual suggest that the manufacturer has a good eye for the details. Highly recommended.

I have bought several reels of these strips for various purposes. The pictures show a strip of these in an 80s sideboard, in these pictures they are running at 20% brightness using a driver matched to the number of LEDs installed in this particular unit (to dim them, the driver must match within around 30%). They stick well to varnished surfaces like these but not so well to raw surfaces like wood or cardboard. The third picture shows a group of 3 (they can be cut off in groups of 3) inside a children's construction project and as can be seen, they have come unstuck. The final two pictures show these lights installed in an inset model of the Grand Canyon within a little side table. The batteries for this number of bulbs have lasted 2 years with intermittent use.

Een goede service

Lyser som den ska

I installed these recently in my kitchen. They powered by a 15A/120V lighting circuit wired to a switch. I also purchased a 2A 24W LED driver/transformer from Amazon which is mounted under my upper cabinets as well. Very straight forward installation, they don’t get very hot, and the 3M tape on the back is enough to hold the strip on. I purchased the clasp style connectors from Amazon as well. The connectors work pretty good but soldering would be better.