







🔴 Quiet keys, happy fingers — type smarter, not louder!
This pack of 120 red silicone O-ring dampeners is engineered to reduce keyboard noise by up to 50% while providing superior shock absorption that minimizes finger fatigue. Designed to fit Cherry MX and compatible mechanical switches, these durable O-rings enhance typing comfort and longevity, making them an essential upgrade for professionals seeking a quieter, more ergonomic keyboard experience.
| ASIN | B01MSMB96R |
| Are Batteries Included | No |
| Best Sellers Rank | 7,499 in Computers & Accessories ( See Top 100 in Computers & Accessories ) 249 in Keyboards (Computers & Accessories) |
| Brand | ThreeBulls |
| Colour | Red |
| Customer Reviews | 4.4 4.4 out of 5 stars (6,069) |
| Date First Available | 16 Nov. 2016 |
| Guaranteed software updates until | unknown |
| Item Weight | 18.1 g |
| Manufacturer | ThreeBulls |
| Manufacturer reference | yun-dong-120 |
| Power Source | Wired |
| Product Dimensions | 10.16 x 6.99 x 1.02 cm; 18.14 g |
C**Y
Great set of O-Rings for quietening the keyboard down and making a more pleasant typing experience.
These are really nice, I had to replace the keys on my Razer Blackwidow with some phantom keycaps, and as I have very noisy green switches, I thought I'd take the opportunity to add some O-Rings to quieten it down a bit, and these certainly do that, much quieter than before, and improves the typing experience. They work well and don't seem to affect key presses in any way, especially when gaming. Very easy to fit at the same time I was replacing the keys, and plenty to do the entire keyboard. These look like they are going to last a long time, and no complaints about the price..
U**L
Useful for reducing the impact felt when bottoming out each key-press
I bought these O-rings to help silence my Razer Huntsman TE keyboard. It will certainly quieten your keyboard if you place two O-rings on the stem of each keycap as some folks are advocating, however I would recommend *against* that. I found that doing so makes each key press feel 'mushy' and unsatisfying. Instead I recommend : 1. reducing echo by filling the void spaces inside the keyboard with EVA foam sheets cut to size. 2. reducing the key stabiliser rattle/chatter by lubricating the stabilisers using synthetic grease. There's no need to disassemble the switches, just apply a small amount with a brush around the stabilisers and areas of the switch housing that are in the vicinity. 3. finally reduce the impact * of each keypress by adding a single O-ring to each keycap stem. Each of these steps made a significant improvement to my experience using the keyboard - as a result it's noticeably quieter and more pleasant to type on. * Using a single O-ring reduces the impact felt when you bottom out each key press, making the keyboard less tiring to use over prolonged periods. I did make an exception for the 'Enter' and 'Spacebar' key caps, where I doubled up on the O-rings as these keys were particularly noisy.
A**R
Need to be given some time to settle down
Seems like they take a while to "break in" but after that typing is comfortable.
J**O
Highly Recommend- Logitech Pop Keyboard
I got these to help reduce the noise of my Logitech Pop Keyboard and have definitely noticed a difference by using 2 O loops for each key. Since I need to bring this keyboard to the office I’ll be getting another pack to add 3 loops to each key just to ensure I’m not annoying anyone with the clacking!
U**R
Keyboard noise reducers
Could have got these lot cheaper from elsewhere but these were available quickly, were the correct size for keyboard caps without needing to search around on Asian sites.... Used for dampening the downstroke key noise on a keyboard, some don't like the feel but I can't tolerate the clatter so they do work - whether they work for YOU is a different matter - at the price, nothing really lost.
T**Y
Great little stiffener
Got these to put round wobbly joints and they worked a treat
L**E
Way Cheaper Then Branded
If you use a mechanical keyboard I would recommend these. They don't make your key presses silent but you'll notice that the noise from key pressed is reduced considerably. I'd recommend putti g two rings on each key. Before I bought this product I was a sad boi, now I'm a sad boi with a quieter keyboard. I rate this product a tiny white ring out of ten.
J**E
Didn't work
Keyboard - Akko 5075B with Akko Piano V3 Pro & Cherry keycaps. I tried the O-rings but unfortunately they are unusable. 1 made no difference to the sound at all. Two or more did start to reduce the sound, but the keys would occasionally not register. Had to take them all off.
M**E
Werkt niet
J**R
J'étais un peu hésitant à la vue de certains commentaires expliquant que la réduction de bruit ne marchait quasiment pas mais dans mon cas la différence est très nette. Cela dépends peut être du clavier mais sur mon roccat vulcan 121 switch rouge la réduction du bruit des touches est bien présente, il n'a plus le claquement en bout de course.Je dois aussi préciser que j'ai mis deux joints par touches, du coup je n'ai pas pu faire la totalité du clavier mais juste les lettres , le pavé numérique, la ponctuation ainsi que les touches entrée, espace, échap et les flèches directionnelles.Bref ce sont les touches que j'utilise le plus. En ce qui me concerne je suis plus que satisfait du résultat.A voir dans le temps si cela fonctionne toujours aussi bien.
J**R
I was hoping that it would make blue switch more quiet, but it didnt. I guess the clicking noise is un-avoidable. This product sort of increase the height of my caps if tri-paired per cap which helped me to emphasized the most used caps. Its always good to experiment anyways. This goes to my keyboard btw but I dont know about others. Thanks anyways.
S**Z
Used up on all keys and have extra to double dampen it. Great Product. Transparent great for RGB keyboards.
M**N
I recently installed the ThreeBulls 120-pcs Clear Rubber O-Rings on my mechanical keyboard and they’ve made a noticeable difference. The set includes enough rings to dampen all my keycaps, and the transparent design means you don’t lose the look of your world-showing RGB lighting. After installing them, typing feels smoother, quieter, and less “pingy” — the hollow sound under heavy keypresses is significantly reduced, which has been great for shared spaces or when gaming late at night. Installation was straightforward: I popped off each keycap, placed an O-ring around the stem, reinstalled the cap, and moved on. Because the rings are clear and thin, they barely change key travel but just enough to soften the bottom out. I found that my fingers felt less jarred during long typing sessions, and the sound profile shifted from a higher-pitched “klack” to a more muted, refined “thock”. For the price, getting 120 rings is generous and gives you extras in case you decide to adjust or replace later. The build quality held up during multiple days of use — no rings popped out, and none became loose or shifted underneath caps. They also didn’t interfere with the fit or stability of the keycaps. My wrist rest might get more attention than ever because my desk is quieter now. If you're looking for a simple, budget-friendly way to upgrade your mechanical keyboard’s acoustic profile and typing feel without changing switches, this O-ring set is an easy win. For value, performance, and usability, it easily earns five stars in my book.
Trustpilot
3 weeks ago
2 weeks ago