Hot RacingATF117XT02 Aluminum Heavy Duty 17mm Hex Hubs 10mm Offset Arrma 1:10 4x4

Great purchase made for 1/10 scale rc use loctite on inner axel nut and your ready !

Item new as described. Fit my arrma granite. Shipped quickly.

I have these on my 3s Arrma Vorteks and have bashed the crap out of it with these on. They're designed well and look good, I love the o-ring that acts as a thread lock on the outer cap, but one of the nuts that go inside to secure the adapter to the axle keeps coming loose on my front left wheel. I used blue loctite a couple times (dried for 24 hours) and it still came off causing the wheel and adapter to come off at speed and roll away. Thankfully the whole assembly stays together and you only lose the pin (an extra long pin, I just cut some small hinge pins to length from my 144010 to replace it). Finally what I did to "fix" it is stuff a couple small o-rings, a small nut, then a couple more small o-rings in between the inner nut and the outer cap to not give it any room to back out and fall off... it has worked for a couple packs since then. Overall happy with them and will buy again if I manage to break one.

Very easy installation on the ARRMA Big Rock 3S V3. Being new to the hobby, I thought it may require additional modifications, but it was really easy. Plenty of YouTube videos to also show installation.

For the $39 these cost, I was hoping for a truly high performance adapter for my Arrma Big Rock. Don't get me wrong, the parts are heavy duty. Aluminum castings, locking wheel nuts and axle pins are great. However, when it comes to this barrel nut setup, there is nothing in place to maintain the nut tightness. No lock washers, no star washers or nylon locking nut. I've also tried the "threadlock" method like many of the reviews suggest. Still had hubs spin off and send my axle pins into outer space. I've wasted days waiting for new axle pins, only for it to happen a second time. And now I have a stripped axle nut for my troubles, deemping the whole conversion system useless. I'm frustrated. I'm hoping the seller reaches out to make this right.

They look great and seem like they are very well made but there is something with the barrel nut that holds the hex on the hub. I used blue loctite on all 4 when they were new and even waited the full 24 hours for the loctite to do its thing, they still fell off I’m pretty sure I’m on my 3rd time re attatching one wheel with loctite. So be prepared for that. When they do stay on they look great and preform very well

The thing to note with these hub adapters is that you will need to use copious amounts of loctite and a good strong tightening of the set screw that secures the hub adapter to the axle shaft.Warning!!! Let the lock take cure by at least 24 hourI upgraded my Arrma Granite to 6s and started destroying rims with the 14mm stock hub. Now I can run as hard as I want to with larger 17 mil hubs.Yes it cost more but the extra 10 mil extension also helps out when selecting 17 ml hub tires that are naturally bigger than 14 ml hub tires.The long and short of it is I recommend this product and if you buy it USE LOCTITE!!!!

Work great, BUT, if you are bashing, use lots of lock right, the retaining nuts WILL loosen up. Other than that, they are great. Nicely made and have held up to lots of abuse.