Minwax356100000 One Coat Polyurethane Protective Wood Finish, Clear Gloss, Quart

Goes on great and 1 coat will work but clean up was super easy,hot water works best....

This product is easy to use, easy to clean up and durable. Used to seal buterblock and it looks new after a year.

Being the first time using a water based polyurethane product, I'd say it worked okay. One coat gave a nice even coverage, and clean up was easy. Very little, if any odor (one of the reasons I wanted to switch from oil based). I didn't attempt to see how a second coat would work since I was using the satin finish type of this product.

Good finish and one coat seems to be all you need. The value was really good compared to big box stores. Goes on well smooth texture time will tell on the strength of the coating. Negative is if you get it to thick it turns white.

Applied to factory sanded face grade “A” plywood after vacuuming and wiping down with a damp cloth.I noticed that going against the grain the cloth drug a bit on fibers not visible. Coat one was dry to the touch in less than 2 hours but had a slightly bumpy surface. Next day I hand sanded lightly with 240 grit,vacuumed and damp clothed the surface. After inspecting for any remaining rough spots the last coat wasApplied with a smooth gloss result. I will use this product again.

This is the best stuff ever made. It self-levels and leaves not streaks. One coat is all you need. I do two on nightstands for added protections

It's very thick in the can. And difficult to get an even coat. And you have to be careful with drips. Ultimately, I think standard polyurethane gives better results even if you have to use more coats.

Used this for a desk we made. It went on well, dried ok, and left a durable coat