Roopose Galaxy Note 9 Screen Protector Tempered Glass,3D Curved Full Coverage Liquid Dispersion Tech Adhesive Repair Function Easy Install Kit for Samsung Galaxy Note 9 (2018) -1 Pack

for those who want a Whitestone Dome budget alternative, this is it. Its less ensuring than whitestone but will have near equivalent results if done right. The only differences is that this one has about 0.5mm more coverage along the perimeter compared to whitestone, but is slightly sharper on the edge of the glass panel making it slightly less ergonomically comfortable. It also has less coverage on the forehead area but it serves justice to the sensors not getting covered in glue. If that gets you paranoid for cracks on the top, use a case with 1.5mm raised lip along the top and bottom borders. Other than that they both cover the display fully. For a good installation, my first suggestion: remove the s pen before installing. I cannot stress the number of 1 star reviews and complaints that involve broken or permanently glued styluses still inside the chamber. My 2nd suggestion: do the installation in a very bright room so you can see any dust on the display prior to glue release. My 3rd suggestion: turn off always on display and touch to wake. I wouldnt say power off the device as you still may want to save time turning on the display after curing to see the results, but a fully blacked out screen during installation will let you see any pesky dust still on the glass. When following instructions and youre up to the part of the glue release, make sure the surface is level and that the glue bubble is in the upper middle of the screen. Then make sure the sliding tab is all the way in before angling the glass on it. Once the glass is angled on the bottom of the phone and held up by the tab, tilt the phone so that the glue bubble slowly slides down to the center where it will then stick to the glass panel. Once the glue bubble is in the dead center, pull out the tab so the panel can fall right onto the glass and start the evened out glue spread. If you have bubbles tilt the phone in the direction of the bubble so it can hopefully flow out under the glass. Finally tilt the phone down so the glass slides as close to the bottom so the glass doesnt cover any of the sensors of the forehead area. Cure the whole panel evenly with the uv light for about 15 seconds and then removed the installation frame. Wipe and slide an alcohol wipe (DO NOT PRESS HARD) along the borders that the protector doesnt cover and then cure evenly for about 2 minutes. Thats pretty much my guaranteed process of successful installation.

I bought this product as a replacement for my Whitestone Dome Glass screen protector because it had a crack across it. I thought the whitestone instructions were pretty insane but they were in depth with minimal margin for error. This product is trash in comparison. Yes, it's cheaper and you get what you pay for. The instructions are not very clear with sticker placement or where to install certain parts. The harness doesn't even properly hold the glass in place. Regardless, this was a waste of 28.99 and I'm pretty frustrated right now. Roopose, be better.Edit: Roopose has fantastic customer service. After my initial review, they heard my cries and sent me a replacement free of charge. Roopose told me to follow their instructional video on youtube, which I highly recommend. In my honest opinion, the installation process still leaves some room for error but the video does a good job of breaking it down. Pay attention to detail! The frame is not 100% cut to size and your screen protector can slide around a little bit (during the glueing process). Also, the screen protector is not big enough to cover your entire screen. Do your research before hand to help make the process easier. Thank you for understanding my frustrations amd sending me a replacement.

I have tried at least 12 diffrent tempered glass screen protectors and this is the only one that worked for me! I have tried the screen protectors with just the adhesive on the edges on the screen protectors and also the full adhesive, and none of them worked for me. I feel that the curvature has to be the problem. This one right here worked flawlessly and it has been working flawlessly for 9 months now with zero issues! The instructions were pretty easy to follow. After first install, you'll be an expert at it. I did not have any issues with the liquid glue spilling all over the phone and elsewhere like I did have with the other Whitestone brand! Stickers are included to block the earpiece and speaker openings.If you have experienced issues with all the Note 9 screen protectors, do yourself a favor and forget the rest and get the best!

My 10yr old keeps dropping his note 9 and he almost gives me a heart attack. so to protect his 1100$ phone we got this after reading the reviews. The glass seems to be about 1/8 or 1/16 of an inch to short for the phones screen so I had to slide it around on the glass to get it to where it seemed right, after after the glue set it seems to be very good. its messy so beware to have a towel or something down, took some time getting the phones cleaned up after. the UV light worked great, at first I thought it was broke but I had to press the cord in more and then it was fine. Overall its a good purchase.

Ok well the instructions were a bit vague. I did receive an email with tips from the seller but the video attachment wasn't attached so I didn't get watch the video. However. I think I did it right... From what I understood in instructions. In the end, no bubbles, smooth surface, sealed off good. It's a little short for full screen coverage tho. But it works with my case. It's a thorough process but detail is key for success! They included more than enough to make sure you got it done right!

Got this glass screen protector for my note 9 originally. I had an issue with the protector cracking (to be honest may have been my fault..). They were very quick to respond and sent me a new one at no charge. Installation was very easy. I had no issues with running glue, bubbles, etc. everything went perfectly. Touch responsiveness is as good as without the protector installed. Does not scratch easily. Only complaint is that it could cover a millimeter or two more screen top to bottom. However it fits bot my cases with no issues of separation (both otterbox defender and ESR glass back cases). This may not have been the case if the screen protector was a tighter fit.