PONY56 2-1/2" Deep Reach Clamp & Spreader Fixture for 3/4" Pipe

These are the only pipe clamps I have found that do it correctly.Only with these, the Jorgensen Pony deep reach (and it MUST be DEEP REACH) do you find both the screw adjustment and the long distance clutch adjustment on the SAME end of the clamp.With all other pipe clamps I've come across, the screw adjustment is on the fixed end, meaning when you are working with a long pipe, you need to keep running around from one side of your work bench to the other. It's an infuriating and pointless design flaw that for some reason only these deep reach pipe clamps avoid.Well made, they work great, and BONUS, they have 2x the depth of reach vs standard.

Great product. Jorgensen clamps are the best.

This is just the best u can get, strong iron clamp.USA knows how to make tools.

Working as it should.

I have used it twice and it was a life saving product.The first time was for doing foundation work on a pier and beam house.I bought some 2x6 pressure treated wood and laid them out to dry for a few days in the hot texas summer sun.If you've never done that, pressure treated wood are prone to bowed, curled, and warped when dried.First, I routed the 2 diagonal corners with 5/8" roundover bit.I put some Ideal ClearGlide Wire Pulling Lubricant on the rounded corners and pounded in with a hammer.Then I used this clamp to compress the new beam to the old beam and attached with 3" Deckmate screws.The second time was on the rear leaf suspension on a Nissan Hardbody truck.I replaced the factory worned rubber bushings with Energy Suspension brand polyurethane red bushings.If you've never done it, it's a tight fit and zero tolerance.Even with the silicone grease that they provided, it's impossible to squeeze the mounting brackets in the back and mounting rod in the front through the middle hole of the bushings that are inserted inside the shackles.This clamp does the trick. It is barely deep enough in this case but I wish it's about 1/2" deeper.Just a few words of advice, if you've never done it, you should be aware that there's a lot of tension especially in the front shackles.On the rear shackles (2 on each side), you can jack up or lower the truck for get a matching distance to insert the mounting brackets.On the front shackles (1 on each side), you will need another helper to step on the leaf spring.Buy one, you will need it later. Don't waste your money on the shallow ones or those that use 1/2" pipe.I have those but this is always my first go to clamp when I need it.

Deep pipe clamps are extremely useful for contractors, wood workers, and fabricators of all kinds. VERY helpful, can be used to prop/clamp/hold welding parts, etc.I uses them for table making from slabs - Deep PONY clamps are invaluable, heavy duty necessities for any plank-style or butcher block construction.You'll find may other uses as well. Length ADJUSTS to the length of your steel pipe - so up to 10', if needed! Most useful is a working range from 18"-to about 5' pipe, low flex and torque in these ranges.Well made. Would purchase again. I trust PONY clamps and gear for long and trouble free life.

I have many Jorgensen bar clamps that I have used in my woodshop for many years, This style I have never owned as I did not have a need for one. well a project came up and I needed one. The quality is as good as my old ones, But I am giving it 3 stars because it is made in China. I feel better buying American made tools, witch is hard to do nowadays unfortunately.

very durable product will last for years -- but kind of pricey -- and took awhile to get to my home -- very good steel casting and acme threads are machined perfectly -- hope price drops would like a few more -- getting ready to make a butcher block table for kitchen