D-Line 13.12ft Cord Hider Kit, Patented Cable Cover, Hide Wires on Wall, Channel for TV Mount Cords, Raceway Wire Hiders, Paintable, Adhesive, Half Round, 4X 1.18in W x 0.59in H x 39in Lengths, Beige

Installed by a 74 year old 'Grandma'! This "cord hider kit" has good step by step pictorial instructions. Plan your assembly with a sketch, and prepare all sections: Measure what lengths you need and how to best use the 39" product parts. Be sure you allow space for the 'joints and corner' pieces. The product is easy to fit, just cut to the lengths needed (with a microblade saw). Lay them out on the floor, just as they'll be on your wall, to assure correct fit. As for functionality- we used this in a bathroom to hide the extension cord from a receptacle to a bidet. Loved the stick-on strip for easy and opening on the front attachment! For only about $30 looks neat and will protect the cord from water spills and mopping.

The half-round profile blends in with baseboards very nicely, if you happen to need them there. If you were looking at them from a distance, they could both appear as a single, original moulding.When looking through reviews, there seemed to be a mix of people saying the adhesive was either too strong or a bit weak.I considered using some known 3M adhesives to sidestep either issue. However, I had completely forgotten about this until I had already started installing them. The units I received definitely had very strong adhesives, to the extent that they will certainly remove paint should they need to be removed.In our case, they are being run along the top of baseboards and this strength is far preferable anyway. This is in an area where there is a lot of movement and anything not strong would be worse long-term and there is no intention to move them around. Worse case scenario, touch-ups are not hard to do. However, if one may not be entirely sure about placement; it would be advisable to use a known, non-damaging adhesive temporarily or permanently.So far, I’ve not made use of the connector bits. Instead of using the straight couplers, I just left small gaps for future access. I only had one corner in the installation, but did not want to bend the coax cable enough to use the 90° coupler. The looks in these spots were not of concern anyway.I can see how these pieces would be cause for frustration if you are planning to need them, though. They fit loose and feel like they would easily come off. Was not a concern for us though.I’d buy again if needed.

I attached a terrible picture I’m sorry.I was able to fit 4 wires in one tube, which wasn’t easy bc the wires I needed to hide were pretty thick and wide (coax cable, hdmi, cable box and tv plugs). The coax cable was already stapled to the wall above the heater by the cable guy so it was too tightly secured to fit fully into the tubing which kinda f*ed things up for me. So I wasn’t able to fully close up the tubing all the way down, and had to leave a section opened. I’ll tale better pics tomorrow during the day to illustrate that better.The adhesion was great, I have no plans to remove the tubing anytime soon so I won’t speak to it’s removability but from what I could feel initially, this thing is going nowhere. The tubing closure could be slightly more secure and tighter, to accommodate thicker cables, but so far it’s holding up. The color matches my wall as well as it could. We have a baby coming soon and this tubing helped get a whole mess of loose and hanging wires under control. Not to mention it’s jsut aesthetically nicer. We had run the wires near a curtain panel so they were pretty hidden anyway but this just makes it that much cleaner.I definitely recommend but I also definitely did not need four of these. I only needed one. So now I’m stuck with three of these giant tubes. Otherwise still a good buy and definitely helped.Oh.. pro tip: there is a clear protective film over The tubing you need to take off.

Easy to put on! Just a reminder, the connection parts are better to put on before you tape all the tubes. Also, it is really easy to cut, because I use my kitchen knife lol

These are the easiest to work with! They are well made and easy to configure and install. I wish the corners fit together but I found a solution for that. You can cut the long pieces with a scissor making for a clean cut. Used similar kits before but I truly like this one the best. Easy, peasy, great!

Well made and easy to use and install.Attractive and blends in with the white molding or can be painted to match.Highly recommended

Excellent product. Very easy to configure yet quite durable