2 Pack Reversible Spray Tip Nozzle for Airless Paint Spray Guns and Airless Sprayer Spraying Machine (311)

I was in the process of spraying trim and doors in approx. 900 sqft of our addition. The trim was door casing, window casing and baseboard. All of them were approx 6” in width. A pro painter recommended a graco fine finish tip of a 208, 209, 210. I bought the 210 and it worked great. I had a couple runs but nothing crazy or unmanageable. However, I was concerned the 4” spray pattern was too narrow and a 300 series tip would work better on the doors but spending another $50 on a graco tip was tough to swallow. So, I took a chance on this aftermarket tip. Did it work? Absolutely, I didn’t notice the difference in quality. I bought the 317 which has a 6” spray pattern at 12” away and produced more volume than the 210 does. The 210 was a fine finish tip, I don’t think the 317 is. The 220 uses the blue rack (which I had to purchase) but the 317 tip used the orange rack that came with my pump. I had a couple slight runs with the 317 tip but they were on the first coat and easy to sand. One the 2nd coat, I perfected my spray pattern and had no runs. Sure there are lots of tricks for a pro quality job, but overall I was very pleased with this 1/4 price pair of tips. If I were you, I wouldn’t hesitate. BTW, I was using a Graco Magnum M5 pump. The instructions say my pump isn’t compatible, but it fit the gun and I had no trouble spraying it.

Great price and quality, same as name brands.

Works, decent spray pattern, fits, slight leak

My new airless sprayer (the X7) indicates nozzles should be swapped every 15 to 30 gallons of paint and when cleaning the unit. There's an amazing buildup of overspray on the head after just a few gallons so I took their suggestion.The problem is the factory nozzled were fairly expensive and this pair was 1/3 the price for 2 of them (plus the seals). The pattern was slightly wider than the factory nozzle but it was even and the paint went on as well as the factory. I'm pleased with these as an alternative.My current project will probably require changing colors/tips 6 times so this is quite a savings. It's partially down to multiple colors, partially because of weather. I think this pair of tips will probably complete the project with no trouble.

I bought these(515) for the .015 hole. The width of the pattern was as expected but the amount of paint seemed just a bit heavy. Don't get me wrong for the money and if your doing larger outdoor projects it'll work. I went back to my 415 and saved 30% of paint for the same area. I run latex at about 1800 - 2100 psi no thinning. Running a 8" wide instead of the 10" wide took a little longer but the paint usage for me was worth it. The paint I use is a premium SW and the Mil thickness for proper coverage is what I want. With a good paint you can vary the thickness without sags or runs. Keep a wet edge it's all good! Hope this helps.

Want no overspray ? Want to use less paint ? Than start using these !! Game changer..I had to turn down my paint flow which means it goes further !! These tips are sweet !!

I tink that is better than that the oem

These seem to work well at a fraction of the price of the name brand product.