F150 3rd Brake Lights for 2009 2010 2011 2012 2013 2014 Ford F150 PROAUTO Waterproof Reverse Lights Lamp LED Bulbs with Smoked Len

I received this on Oct. 9,2014. Installation was very easy. The instructions stated to attach wire marked top from bike to connector labeled low, and the other wire to the connector labeled hi. Hi and low were not marked on the headlight, but it only took a moment to hook them up and make the right connections. The thee upper LED's are the low. It works great, has a bright white light. Brighter than the stock halogen bulb. It also throws the light to the sides unlike the stock light. Total time spent was 45 minutes to install it, and that was taking my time. Fit and finish was spot on, quality made item. I was hesitant to order it at first due to it coming out of China, due to quality issues with a lot of things, but took a chance, and was impressed with the quality. I'll bet the OEM 400.00 one comes out of China. It does not interfere with the radio, as I've heard other sellers LED head light have done. This item is worth the money and I do recommend this item. If I have any problems with it I will update my review, and I'll add a few pictures soon.

Ok, I was skeptical. I could not believe that a $100 light could perform as well as the Victory $400 light. I saw some YouTube comparisons and the "Chinese" knockoff performed very poorly compared to both the Victory LED and the original Halogen. However, there were many good Amazon customer reviews of this particular light and it claims to use CREE LEDs, which are usually very good quality. It also claims to be DOT approved, unlike some of the other Chinese lights. So I thought, why not give it a try? All I can say is, WOW, this thing is great! It is definitely not the same light in the YouTube comparison. That light had pigtails on the back, this one has sockets and an aluminum heatsink, just like the Victory LED. I can't imagine the Victory LED being any brighter than this one. Installation is plug-n-play, just connect the wire labeled "Top" to the left socket (looking at the back of the light). That's the low beam. The bottom LEDs are the high beam. Word of caution, do NOT look directly into this light (don't ask).

****Edit. I had issues with the high beam, and a couple LED'S not working. The low beam was so great I wasn't going to send it back. Out of the blue, after reading my review, the company sent me a new light with no questions asked. I highly recommend this light, and the customer service I received from this seller was phenomenal! Don't hesitate to buy to but this headlight!***It works I ride a 2007 Victory Jackpot, and wanted to upgrade the stock headlights. The light is much better than my stock HID, halogen combo. As some people noted, the polarity for the low beam was backwards and I blew a fuse. I had to replace the low beam socket, since it was a different style, but that was easy. The spread of the light and color is fantastic! My biggest complaint is that the low beam turns off when I turn on the high beam, unless I hold down the momentary high beam switch. My old light had no issues with both bulbs being on at the same time. When I first installed it, two of the four high beam LED's weren't working. As soon as I snapped a pic so I could return it they started working. Not sure if I got a defective unit or what. I guess time will tell...

I have a 2017 Cross country-This light is absolutely great. Bright, cheaper than Victory, and looks great. When i bought it the light was no good out of the box, the high beams didn't work then they quickly sent me another after i told them about the problem which had 1 high beam bulb that didn't work out of the box. The last one they sent works great. I wouldn't expect everyone to have the same issues i did with getting a light that works, most likely just bad luck, but i gotta say the customer service is on point. Would definitely recommend this light.

LOVED IT!AS DESCRIBED!Things you must know:When plugged in. make sure your reference the picture on their seller ad. it helps you determine which is high and low connectors, since the package instructions is almost nothing.With that in mind I connected the lamp and notice the on low beam, it did not light up properly. If you do not have the headlamp functioning properly, BEFORE RETURNING IT, swap the two connectors (High and low) and try low beam and high beam again.I did that an WA LAHH! Low beam was lit and high beam was lit as it should have!When I connected wrong, one of my high beams (one of the circles) was not as bright as the rest. I realized that it was because the power (low) may have been weak and by swapping it (due to my error) would cause the right power to make it run. and it did! now I am excited and itching to hit the road!

No instructions included on how to install. Poor quality for the cost. They say its the best quality, but it is very cheaply made. The screw holes do not align, there are gaps in between the lights and the plastic which would allow water in, and the plugs are too short. I had to purchase 2 extensions along with the y-splitter. Additionally, it is not plug and play as there is nowhere to connect the loose white wire for the back up lights. Also, I spent 2 hours per light to install due to all the issues.

Doesn't fit at all. Bolt holes do not line up so they cant be mounted. These are NOT plug and play, you would need to find your own ground as only 3 of the 4 wires actually go to the trailer plug. Fiddled around with one side for a long time and was never satisfied with the "fitment". This product is a joke. Shame on Amazon for allowing these companies to list multiple completely different items under the same "listing" by using the "color" selection option. So one item has reviews and star ratings of other products and vice versa. This lets a 1 star product that isnt purchased a lot to be listed alongside a 5 start product that has more reviews making the 1 star product look like it's reviews are actually good when they are horrible.