Muzata 10 Pairs 1/8" Cable Railing Hardware Kit Swage Toggle Turnbuckle for Wood Post T316 Stainless Steel Deck Cable Railing System Angle 180° Adjustable Stairs 20 Pack CK07

This kit comes with everything you need to set up a section of railing. They are very easy to install and look great. I highly recommend this for anyone

Very hard to crimp! Use hydraulic crimper and crimp it good. Had 2 that came loose. Was able to slide cable back in and recrimp. Look great and wrenches provided with each package work great.

Excellent quality.

The parts and pieces are a very good quality and, overall, its pretty easy to install. It would have been nice to have a clear set of written instructions included with the kit instead of having to rely only on the video. I highly recommend buying the hydraulic cable crimper and wire rope cutter, makes install much easier. Here is my one beef. When you install the turnbuckles be sure to have them fully extended so that there is plenty of tensioning adjustment. I installed the first couple too short and crimped the cable into the terminal end before realizing the mistake. Long story short, I had to cut the cable and use the terminal end from another turnbuckle to correct the issue. Now here's the beef, when I reached out to Muzata about getting replacement terminal ends I was told they were not available individually and that I would have to buy another kit. Not happy about that! I'd think they would dropped a couple in an envelope and put it in the mail to me as a show of good customer service, but no! Good product and I would still recommend despite the little service miss.

Sleek and easy to install and adjust the tension. Great for stairways because of the ability to pivot the angles. I am not one to read instructions but in this case because of stairways and different elevations I did and it was beneficial.

Came fast and easy to install

I missed the fact that these adjusters were crimp style, and I was lucky enough to have tools on hand that allowed for crimping the tubes enough to grip the cable. They mount easily enough, and adjust fairly easily, with a good amount of throw to work with. I had no problems with them and they're a reasonably attractive fixture on the railing. You just need to be careful when determining cable length so that they provide enough tension on each strand of cable. Once you crimp them, you won't be able to uncrimp them to adjust cable length.

Used for railing at cabin. It went up perfect, bought a crimper for the 1/8" stainless cable got it so tight you could strum like a guitar. It was put up near freezing temps and it did expand and loosen a bit as it got up to 90 degrees. It was a 20ft run. The expansion of stainless cable at a that temp and distance is about .20 inches. So I expect it to tighten a bit this winter. The tension adjustment make it easy to adjust seasonally so we don't over tighten and break it.

I ordered the T316 stainless steel rope, turnbuckle kits and tools to add the perfect finish to my raised oak deck. I had reason to contact the company and their after sales service went above and beyond my expectations. Well done and thank you!

Great product. Used for my deck outside. It's been over a year now and there is no rust or degradation so far, and this is through Canadian winters. It was really easy to install and all the products that I was provided including the screws worked perfectly (didn't get any stripping when using the screws etc).

I liked this kit and would use it again. It is easy to fit and works well. Screws supplied are too short so use SPAX 5mm 50mm long SS with the keyed heads. The steel fittings are robust and sensibly designed. A winner.

Brilliant very please with the product. Just remember your crimp tool is required

I wanted to hide the cables tighteners in the 4 x 4 posts. With the distance i was going I decided that I would end the runs at the corners. You cannot do hide in post at corners if you are keeping your cables level with each other. I found that these and the hide in post tighteners worked well together as it gives you two ends to tighten. I also used the metal washers when going into and out of the posts between tighteners, looks finished. Not sure if this will pass building codes in Ontario. So 4x4 posts 2x4 rails, seven cables. then 2x6 deck boards on top, which gives you a flat surface for beers, plates etc. All is pressure treated and should not need any maintenance.