12"x 12" (5) Bullseye Splatter Target

Oh man, these are cool! They are an inexpensive, uncomplicated splatter target. The backing is rigid enough to withstand a light breeze but is not too heavy to mount with a couple pieces of tape. The effect is exactly what you see in the pictures, accomplished by essentially painting a black material on top of the yellow backing. When a BB passes through the target, little bits of the black flake off, which leaves a nice yellow mark around your hole. I live in FL currently, and so have that horrific sun that seems to have weight to it, along with the accompanying heat and humidity. The only downside I've noticed with these targets occurs after several minutes of exposure to the sun. The targets curl up upon themselves, necessitating additional tape to hold the sides flat. It's difficult to get the target truly flat even using copious amounts of tape, though. The company responded very quickly to an email I sent them about this problem. I couldn't be happier with their response and their customer service. The representative that wrote back to me stated that they had not heard of this problem before, so it's possible that the extreme sun, heat, and humidity here in central FL are the main cause. Out of the sun they don't curl up at all, no matter how long they are left out of the packaging and the splatter effect is not effected by the curling. So the neat splatter effect and the price can't be beat. They're quite visible from a long distance and breeze-resistant. The effect is exactly what you see in the pictures here on Amazon. Other than the curling problem I have in the hot sun, they are awesome and highly recommended.

Nice these work great, very easy to see impact points for zeroing a scope

I use these splatter targets whenever I have to sight in a new .22 rifle. Each rifle I buy has a threaded barrel so that I can attach an AAC suppressor and do the shooting in my backyard. Using a 4X scope or higher allows you to easily keep track of your hits without having to rely on another person or a spotting scope. Since no one has a clue as to what I'm doing, I can take the time to do a good job with each rig. First off I use a boresighter on the larger center target to zero each gun in properly. When I'm satisfied with my efforts, I'll then use three bullets from a different manufacturer--or a different configuration from the same manufacturer--on each of the four smaller targets to determine which ammo each gun likes best. I usually have about eight different types of ammo on hand so it takes two of these splatter targets to get the job done. When I put each gun back in the rack, I tape the bottom of each stock with the name of the ammo that seems to work best in that gun/scope combination. After a few days I'll take the newly sighted in guns back outside to try the different types of ammo once more--just to be sure. Since I'm able to do this in my own backyard it saves me a lot of time driving to/from the range and waiting out the other shooters to change targets. I've also used this method to break in some suppressed .22 pistols. Great targets, easy to use and easy to see.

These are perfect for target practice. Easy to see your shots and great for zeroing your optics, I usually put 50 to 70 rounds through one target. I will buy again.

These are really great targets. They are thick waxy card stock. They don't bend easily. They tend to roll before they crease. I actually keep them in my range bag and they do very well there. They don't scratch up real easily either. Some of the other splatter targets I have had in the past scratch real easily revealing a hail storm ravaged look that makes it more difficult to determine shot placement. These are not that way. They are just the right size for 25-50-75 yards. Maybe a little too small for 100 beyond unless you have a high power scope. I use a fixed 4 power so that is why I say this. The bullet holes are very easy to see thanks to the bright yellow behind black coating. Makes sighting in very easy and almost instant shot placement recognition. The 5 target design is really nice as well. I use this on different loads to compare groupings. I really like the fact that it is all on one paper target. Not having to fumble through multiple targets to compare when introducing new loads into my system is a great thing. All in all this is a really great target. I plan on using more targets from this company such as the silhouette target because I am really impressed with their quality. I Would give it more stars if I could. If you have found any or all of this review helpful please let me know by clicking the "helpful" tab below. Also feel free to check out any of my other reviews via my profile page. Thanks for reading. Peace.

Just what Hubby wanted and was very impressed with them when used.

molto soddisfatto del prodotto soprattutto per il tiro con la carabina

these are great splatter targets with an excellent price

DIe Targets bieten den Vorteil, die genaue Trefferlage auch aus einiger Entfernung gut zu erkennen. Da ich keinen passenden Kugelfang für 30,5cm x 30,5cm Scheiben gefunden hatte, habe ich mir einen passenden Kugelfang gebaut. Vom Hersteller Splatterburst gibt es auch selbstklebende Targets in unterschiedlichen Größen. Damit kann man die zerschossenen Targets einfach überkleben. Habe mir aus 10mm Spanplatten einen Kasten mit 60cm x 30cm x 4cm Innenmaß gebaut. In den Kasten habe ich 4 Antivibrationsgummimatten in 10mm Stärke gelegt. Die gibt es in jedem Baumarkt um sie z.B unter Waschmaschinen zu legen. Die Matten sind 60x60cm. Aus zwei Matten habe ich die 4 Matten für den Kugelfang geschnitten. Die Matten habe ich dann mit einer 30mm Styropor Platte abgedeckt, die ich aufgeschraubt habe. Mit Styroporkleber habe ich dann zwei dieser Targets auf die Styroporplatte geklebt und fertig war der Kugelfang. Der große Vorteil dieser Lösung ist der, dass nun die nervigen Plink Geräusche weg sind, die sonst bei Metall Kugelfängen entstehen. Die Targets sind gut sichtbar und wenn sie irgendwann unbrauchbar sind, klebe ich einfach neue Scheiben auf. Z.B. diese hier: https://www.amazon.de/gp/product/B00YFRE2Q2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Die Gummimatten im Kugelfang sind für "F" Luftgewehre mehr als ausreichend und halten bei mir seit mehr als 500 Schuss. Ab und an schraube ich die Styroporplatte ab und sauge die alten Diabolos aus und drehe auch die Gummimatten. Irgendwann werden ich aber die Gummimatten und die Styroporplatte erneuern müssen.

l'aspect multi-cibles permet de varier les objectifs, c'est ludique et cela permet de règler l'arme en version point visé point touché, contrairement au réglage préconisé par la FFT, qui consiste à règler l'arme pour obtenir une visée en dessous du visuel de la cible C 50 de façon à ce que le coeur de cible de la C 50 se détache par rapport aux organes de visé. Avec des cibles plus petites, le réglage FFT ne permet pas une visée correcte.