تسليم إلى Morocco

للحصول على أفضل تجربة احصل على التطبيق

قم بتنزيل التطبيق

نحن مصدر العناصر من

الإمارات
UK
الهند
USA
اليابان
KOREA

خدمات العملاء

معلومات عنا

دعم العملاء

Dremel 4486 MultiPro Keyless Chuck

Q: I can't open this dremel Chuck. Used liquid wrench and try to open carefully. any suggestions?

I’m late to the party (1/20/21) but had the same issue. However my new 4300 Dremel chuck was stuck when it came out of the box. I never got a chance to take the chuck off. Jill O’s. advice from 2014 was helpful but I couldn’t find a small enough drill bit. I used the opposite end of the small wrench that came with the Dremel. I stuck the end of the wrench between the chuck and the plastic EZ Twist lock. I tapped the wrench with a piece of wood and did this continuing around the base. The chuck unlocked and the teeth opened.

Q: Does this work with the Milwawkee 12v rotary tool? Amazon advertises them together

It seems to work with any kind of rotary tool. I have both a dremel and a black&decker and it seems it is a standard size that fits all.

Q: Will this work with a Wen rotary tool, specifically the 101 piece kit here on Amazon?

Can't believe the hours I spent trying to get the shaft size information for my 2 rotary tools. (Wen and Katonah) (or is it called "a shank"? I'm new to this world of rotary tools.) Even called Wen and the guy didn't know the size. Even Dremell doesn't give the size of the Multi Chuck hole. It only gives the Dremell models it works with. Anyhow, the collet nuts are interchangeable on both my tools so I figured it was a standard size. I bought a knock off Multi chuck at Ebay and, at least the guy put the measurements of the hole in the picture. It was .7cm. Unfortunately, that is also the size of both my rotary tool shafts/shanks so, the multi chuck was too small to screw on to the rotary tools I have. But, I am glad I came across this answer since, I almost bought a Dremell Multi Chuck. It too is too small. Saved me about 10 bucks and another disappointment. Thanks.

Q: will it fit black and decker RTX?

Yes. I bought one to use with my RTX-B rotary tool and it works much better than the collet that came with the tool.

4.6/5

معرّف المنتج: 77090868

معاملة آمنة

التفاصيل

Brand
Dremel
Material
Plastic
Item Diameter
0.03 Inches
Item Weight
0.3 Ounces
Capacity
0.13 Inches

يُشترى معًا بشكل متكرر

Dremel 4486 Keyless Chuck - Ideal for 1/32” (0.8mm) to 1/8” (3.2mm) Shank Rotary Tool Accessories

Dremel Flex Shaft Rotary Tool Attachment with Comfort Grip and 36” Long Cable - Engraver, Polisher, and Mini Sander- Ideal for Detail Metal Engraving, Wood Carving, and Jewelry Polishing, 225-02

Dremel 4485 Quick Change Rotary Tool Collet Nut Set Medium

الوصف

المواصفات

Global Trade Identification Number	00080596011796
Manufacturer	Dremel
UPC	080596011796
Country of Origin	USA
Item model number	4486
Product Dimensions	8.64 x 4.57 x 0.76 cm; 8.5 g
ASIN	B0000302ZV

لديك سؤال؟ انظر ماذا طلب الآخرون

I can't open this dremel Chuck. Used liquid wrench and try to open carefully. any suggestions?

Does this work with the Milwawkee 12v rotary tool? Amazon advertises them together

Will this work with a Wen rotary tool, specifically the 101 piece kit here on Amazon?

will it fit black and decker RTX?

الأسئلة الشائعة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

عمران ف.

متجر موثوق للغاية ومنتجات أصلية. سأشتري بالتأكيد مرة أخرى!

منذ أسبوعين

ميرا ل.

معاملة سلسة ووصل المنتج في حالة مثالية.

منذ 3 أسابيع

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

خدمة ملايين المتسوقين في أكثر من 100 دولة

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart

تسوّق أثناء التنقل، في أي وقت وأي مكان.

1170 DH

الرسوم والضرائب مشمولة

Moroccoمتجر

الشحن مجاني

with PRO Membership

إرجاع مجاني

30 يومًالمستخدمي عضوية PRO

15 يومًابدون عضوية