Barrina LED T5 Integrated Single Fixture, 4FT, 2200lm, 6500K (Super Bright White), 20W, Utility Shop Light, Ceiling and Under Cabinet Light, ETL Listed, Corded Electric with ON/Off Switch, 8 Pack

These were very easy to install and they're VERY bright. I mean very bright. I used half of these in the basement over a pool/ping pong table and they might be a little too bright. In the garage they're perfect. They come with all the pieces you need for multiple instillations, they look nice for what they are. I wish the metal holding brackets were a little more robust but you'll only use them once and they seem like they're durable enough to last a lifetime.

These are an amazing upgrade from fluorescent bulbs. I was surprised at how noticeable the improvement was. They are much brighter than the fluorescent bulbs they replaced, but the fact that they turn on instantly, do not flicker, and are silent was almost as dramatic a difference.The installation was simple. Even working on a ladder above my head it was easy to install these alone because they are so light weight. Clips are used to secure the lights, and each light fit snugly in the clips.These provide more light, cooler (heat), and are cheaper to run. I couldn’t be more pleased.

These are very bright, lightweight, and have plenty of connectors and on/off switches. Great deal

great product , perfect for garage

I replaced neon lights in the garage and basement with these, and I'm overall very happy. The 4000K have a nice warm glow (tried the 5000K, and that light was too cold for my taste). After 4 years, with three installed in the basement and five in the outside garage (which gets more temperature and humidity variation), I notice that all of them show about half a dozen dead LEDs, each. Furthermore, two of the garage ones have failed completely, and I had to order more to replace those. Still, not a bad value. Easy to install, though the mounting clips are a bit flimsy. If one falls down (cats! ladders! tool handles!), it's not a big deal, they are light and easy to clip back in.

I'm impressed with the amount and quality of light these produce. I gave them a double-take when I opened the package, but I plugged one in and it was bright enough that I wanted to install them.They are extremely light weight, you could wield one around like a toy light sabre, and are easy enough to install, just screw in a couple of clips, and snap the light into the clips, plug it in and you are on your way.I have a 12 x 24 storage building/work shop. I put two over the work bench, the remaining 6 spaced out through the building and is enough to well light the building. (see photo)The set comes with a nice variety of clips, connectors, screws, extension cords, etc, that should be more than enough for nearly any installation.I really don't know about the grounding other reviewers are talking about. There are two connectors included that is meant for hard-wiring into a junction box, or perhaps a self made wire hookup, which is the only connection that has a ground wire to it, however I don't know what you would ground this to anyway. The light assembly is mostly plastic, so I don't know what you would ground anything to in the first place. Each of the LED sections must have some type of minimum internal power supply which powers the LED's which by the way, are all sold state devices.That's it. What are you wanting to ground?I don't remember the last time I've even had a laptop that had a ground plug on the power pack, there's no point in it as far as I can see, not the mention these draw very little power, 22 watts each.Which brings me to my last point, connecting multiple units. Each of these are inter-connectible with each other and can be added to, and added to, for how many sections? Each section (per listed spec data) is 22 watts, if you add 10 sections, that's 220 watts which is about 2 amps of power. The first connection will be handling the load for the entire length of what you have added down the line. I wouldn't get too carried away with adding multiple units, as per the sellers images/description states you can connect all 8 of these together, and that seems very reasonable, but I would give some thought to connecting more than say 8 or 10 of these, and while it may work, it might be pushing the limit of what the wiring or the LED sections can safely handle, and that's never a good idea. (Edit: Update) Click on the 'see all customer images' and find the images and a 1 star review with burned connectors after adding 16 of these (16 x 22 watts = 352 watts or 3 amps) and you'll see what I'm talking about.Edit: I've added a photo to show these in real life. (no smirking at my messy workbench). This showing just how well these lit up my entire work space.Overall, I like 'em.

As advertised

I replaced my old fluorescent attic lights that I have had for 25 years. Tired of the weak light and flickering when the temps drop in winter. Found these lights and am very happy I did. Very easy install and really bright. Thes lights are very narrow which allowed me to install them on the undersude of my main peak beam. The fact that they also snap together allowed me to have a 30 foot light on either side of my receptacle. Loved them so much, I bought another pack and added lights to my utility room. These are so bright that you could do eye surgery there. Wonderful product.