Thermal Grizzly KryoSheet 33x33x0.2mm – Ultra High Thermal Conductivity Graphene Thermal Pad – Perfect Alternative for Thermal Paste on CPU/GPU/PS4/PS5/Xbox – Made in Sweden

Was looking for something else to try as thermal paste is very messy this works greatWhy did you choose this product over others?:As i said i was looking for something else other than thermal paste and cam across thisValue for money:its a littlke pricey but in the long run your saving money as it never needs changing Size:It comes in a few sizes for different CPU types Make sure you do a little research to get the right size for your CPU type I got the 38x38 Which is perfect for AM4Quality:Very good quality does the job wellThey are quite fragile so be carefulAlso unlike thermal paste they do conduct electricity so be careful not to drop it on any other part of your motherboard or you could end up with a fried motherboard

Temperature matched my high performance paste but with a fraction of the effort to maintain and ability to move it makes it a no-brainer.Fit exactly as it said it would and quality seems high. I was cleaning my PC 6 months later and took the heatsink off to inspect, it's exactly the same as the day I got it.

easy to work with and incredible thermal conductivity

I decided to try this out as I was having to replace the thermal paste (Thermal Grizzly Kryonaut)every 3-4 month due to the heat pump effect from the heat cycling of the PC when powered on and off, as the paste got squeezed out temps on the CPU would creep up and it was annoying as heck. Installed this today and immediately got the same or slightly better temps than with the Kryonaut paste, and no more drying out/pumped out paste to worry about!As a side note you do have to be careful cutting this stuff, it's quite brittle in certain directions, you can see that by the grain, so cut along the grain where possible. I had to take a 5mm strip off one edge cause of the width being shorter than the length on Intel 12th gen chips. If you take your time, it's a doddle and I'd say well worth it, should be stable temps now and less maintenance (x fingers).My system runs a 12700k @ 5.4Ghz OC, and an RTX3090 (in a fairly tight case) both of which are water-cooled with EVGA AIO's, but the CPU could get quite hot once the paste started degrading, this so far has sorted that problem, but be careful this stuff is conductive, and will cause shorts if you're not careful about cutting it! As mentioned, it’s quite brittle, so don’t let any shards break off onto the motherboard, you may find the magic smoke makes an appearance when you thought everything was running just fine ;), some comments seem to suggest this has happened to people, so take your time and do it right!Update: 3 Months in, and happy to report, no degradation in temps up to now, great investment.Update: 12 Months on, still getting the same temps as I'd get during summer when using paste, other than hoovering dust off filters on the case I haven't had to take the CPU off at all in that time!, Buying another sheet to do my GPS next ;), wish me luck.

It is close to liquid metal(conduct) . The perfomance is impressive and easy to reuse if it is not baked on it. The direct die is perfect and easily to be reuse. The normal block on ihs it was baked on it ,but it was better perfomance than the thermal paste. It is not cheap solution, but easier to apply on it. Iam extreme overclocker. 13900ks on direct die hold on 5.9 ghz p cores all cores and 4.6 ghz on ecores all cores. Remp around 80-90 on the stress test with custom loop 420mm and 360mm rads thick rads.

5 Stars from me... Finally i got rid of the sticky messy Pastes. Not to mention that the temps are the same and on some cases even better and will stay the same without the need to reapply.

I bought this to get away from the mess and fuss of thermal paste and because its marketed as reusable.I used the KryoSheet instead of thermal paste with a stock Ryzen 9 7900 heatsink, whilst waiting on a water cooling solution to arrive. When I removed the stock heatsink to install the be quiet! Silent Loop 2 280mm cooler the KryoSheet had been split into strips where the AMD heatsink has surface ridges corresponding with the heatkink's heatpipes. Bottom line, it was completely unusable and the fastest I've wasted £25.51. Does it cool effectively? Yes. Is it reusable? No! don't believe the marketing hype, use thermal paste and be done with it.

Amazing productAll the benefits of high quality thermal paste with none of application or removal mess!!