Spigen Style Ring 360 Cell Phone Ring/Phone Grip/Stand/Holder for All Phones and Tablets Compatible with Magnetic Car Mount - Gun Metal

This works so well. It is level on the bottom, so there's no sliding around or tilting. It will wear out after several months and have to be replace; but, that is not an issue.

I bought this almost 4 months ago and I've been waiting to write a review to see how well this holds up over time. I've gone through so many ring holders, popsockets, phone grips, etc. over the past year and I would say unequivocally, this is the best, most durable one of them all. I've bought Spigen phone cases in the past that were very high quality for the price, so I thought after about 20 different failed phone grips, I'd give this product a shot. I'd been putting it off because it's a bit more expensive than the cheap ones that come in packs of 3 and such. -it's still stuck tightly to my phone case. I have had 0 issues with it coming unstuck. -the swivel function of the ring has remained perfect. On other ring holders, it will get loose over time and spin a little too freely. -one issue I've had specifically with ring holders is that within a month of use, the screws holding the ring to the base will get loose and stick out, which would affect my ability to fully open and close the ring. I still have no issues with the screws coming out on this one. -related to the screws loosening, once those come out, the ring part will often flap around, which means you wouldn't be able to stand the phone on it's side. I'm still able to use the ring to stand my phone up in landscape mode with this ring. -the back of this holder is flat, so resting the phone on it's back gives me few issues. I found popsockets and some other ring holders to be too tall and/or rounded to keep my phone from flopping around when placed back side down. I guess the only downside is that the ring holder has the Spigen branding written on it, which I don't like, but you really won't find another phone grips of such good quality anywhere else on Amazon, believe me. I think I've tried them all at this point.

This phone grip looked and worked just fine . . . for the first few weeks. The ring pulled out easily and yet held firm in what ever position I put it. "Nice" I thought. Then I noticed the finish started to come off, just a little bit in one spot. No big deal for me as I am more concerned about function. Then the finish wore off more and more. Then, as other reviews here have mentioned, the pin started to slide out. And when it slides out, the ring becomes less supportive. Eventually, the pin pulls out of the one side of the tab and then the ring is completely useless at that point. I thought I'd try to salvage it. I mean, it was junk at this point, so why not try to save it? I tried to push the pin back in but wasn't successful at first. A big reason is because when you put pressure on the pin, the ring rotates away from the pressure point. So how to keep that from happening? I eventually used a vise grip pliers (just tight enough to hold it without scratching it up too much. Again, I'd rather have it working than be concerned about how it looks) to prevent the rotation and used a small hammer and punch to get the pin back in. While trying to do that, I had to make sure the holed were lined up between the ring and tab. It was a bit of a frustrating exercise. I eventually go the pin in place. This worked but only for a short time. The pin eventually worked its way out again. I punched it back in but as you may have already guessed, it came out again. In picture pictures one and two are close ups of the pin coming out. You can also see where the vise grips caused some cosmetic damage. The third picture shows the finish wearing off. And lastly, the video shows how non-functional the ring is once the pin comes out. I purchased this Feb 13 and today's post is Mar 23. I should have returned it when I had a chance but for the $15 I spent for it, not a big deal. That's on me. But I'm done with it. Threw it in the garbage and am going to get something else from a different manufacturer. TL;DR The pin holding the ring slides out rendering the holder useless. Do not buy.

UPDATE: One of these lasted about 18 months of daily use on my kindle. Third one is still okay after six months although the red finish has chipped off - it's on my phone which does get pretty rough use tho. The hinge bar starts slipping to one side and eventually comes out of the other side and then it's really loose plus having to avoid the sharp edge of the bar. I keep buying another tho because I really like the design, until the hinge bar starts moving, it's got enough stiffness to stay in one position without being too stiff to adjust it. And I like the circular design. But I wish that Spigen would improve the quality on this product. I've loved all their other products. ORIGINAL REVIEW: I love this BUT I have the same problem as another person, after only three months of use, the hinge is coming loose, one end has popped out and it's pretty sharp and the ring is all loose and floppy. I've ordered another one cause I love Spigen products but if it comes apart too in a few months, I'll have to try another brand.

This ring is my go to for adding to my phone cases. Easy application and sturdy. Rotation is smooth and comfortable. Highly recommended

I have used these for years. I say "these" plural, because I find I have to replace them every six to nine months. They are pleasant to hold and make your phone much more ergonomic, but start to fall apart over time. The bearings go out, the hinge on the ring gets loose, etc. The adhesive is good at least. Great as a finger ring, but doesn't work well as a kick stand.

Fäster bra på ett texturerat skal av TPU utan problem. Fin kvalite på produkten.

Muy buena calidad y precio asequible. Robusto y a la vez bonito.

After one month of use the ring became loose I think the screw that holds the ring to the base is the reason.

Good adhesion. Stuck very well even on my matte finish phone cover. The ring revolves around so it is very convenient.

Just got this ring for my phone and for the first few days of use it was great, super solid and just what I wanted. It spins nicely, supports the phone, and feel sleek and not cheap. Now, just days later, the pin at the top is coming out and it's less solid. I have tried pushing the pin back in but can't get it to work. I wanna love this product I just wish it was functional. Update: contacted Spigen and they are sending me a new ring. Will update again 😊 product support was easy and helpful!